Search
54 articles for “shear strength”
-
A Shear Strength Reduction Method for an Open Pit Slope Stability Analysis Based on Finite Element Method
Abstract: Slope stability assessment of open pit mines is critically important, since it forms part of the overall productivity and safety management strategy of the mines. The aim of this work is to investigate the overall stability conditions of three (3) open pits in Gold Fields Limited, Tarkwa Ghana. Field and laboratory investigations were conducted as well as empirical methods. Finite Element Analysis (FEA) in Rocscience was carried out using the …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 1, 2026 · pp. 1–24 Read article
-
Numerical Investigation on Structural Behavior of RC Beam-Column Joints: Beam Weak in Shear
Abstract: This study presents a numerical investigation on structural performance of reinforced concrete (RC) beam-column joints (BCJ) with beam weak in shear subjected to cyclic loading. Retrofitting techniques are explored, utilizing Glass Fiber Reinforced Polymer (GFRP) for shear strengthening, in accordance with ductile detailing standards outlined in IS 13920:2016. The column and beam elements are designed following the guidelines of IS 456:2000. Various specimen scales, including full-scale, 2/3-scale, and 1/3-scale specimens, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 202–226 Read article
-
Interfacial Bonding Efficiency in Jute-Carbon Fiber Polyester Matrix Composites Evaluated Through Short Beam Shear and Interlaminar Fracture Toughness Testing
Abstract: The natural Fiber–synthetic Fiber hybrid composites are jute–carbon Fiber hybrid in polyester matrix which could be used in semi-structural applications of automotive, construction and marine industry as an eco-friendly and cost-effective alternative of conventional carbon Fiber reinforced polymer. But the hydrophilic nature of jute Fibers and the relatively inert surface of carbon Fiber's cause weak bonding at the interface of the polyester matrix, which causes premature delamination, poor interlaminar shear …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Investigation on Structural Behavior of RC Beam-Column Joints: State-of-the-art
Abstract: Beam-column joints (BCJs) are critical structural elements in buildings, influencing overall structural performance and safety. This review paper presents a comprehensive analysis of findings of research showing concern about various aspects of BCJs, focusing on eccentricity effect, numerical investigation, joint behavior, shear strength, retrofitting strategies, and recent advances. Through experimental studies, numerical simulations, and analytical approaches, various studies have made significant progress in understanding BCJ response to various loading circumstances …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 40–68 Read article
-
Process Optimization of Spot Welding for Galvanized Automotive Steel Sheets
Abstract: Resistance Spot Welding (RSW) is a pillar of the modern automotive industry with the usage of lightweight and high-strength products at the highest point of demand. The optimum weld quality of galvanized steel sheets which is a material of choice because of its additional corrosion protective property is however not achieved easily. This study is a well-developed data-based solution to designing the RSW process in the most efficient way, providing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 32–42 Read article
-
Qualitative and Quantitative Effects of Non-Thermal Atmospheric Pressure Plasma and ErCr: YSGG Laser Activation on Surface Remineralization and Fluoride Release of Three Different Fluoride Varnishes
Abstract: Dental caries remains a prevalent oral health concern worldwide, prompting ongoing research into innovative approaches for caries prevention and management. This experimental investigation endeavors to conduct a comparative assessment of the bioactivity, fluoride release kinetics, shear bond strength, and compressive strength of glass ionomer cement (GIC) augmented with three distinct types of inorganic bioactive nanoparticles. Bioactive nanoparticles have garnered interest in dental materials for their potential to enhance material properties …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 292–303 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
The Importance of Safety Engineering in the Design and Assessment of Foundations
Abstract: In safety engineering, ensuring the stability of structures under lateral loads is a critical aspect of foundation design. Lateral forces, such as wind, seismic activity, or other environmental pressures, exert overturning moments on columns, which must be carefully managed to prevent structural failure. To maintain stability, the overturning moment at the foundation base, generated by these lateral loads, must always be less than the restoring moment produced by the soil's …
Published in Journal of Industrial Safety Engineering · Vol. 11, Issue 3, 2024 · pp. 24–29 Read article
-
Characterization of Antibacterial and Biofilm Inhibition in Tin and Zinc Oxide Nanoparticle-Doped Orthodontic Composites
Abstract: Background: This study investigated the antibacterial effectiveness of orthodontic adhesive enhanced with stannous oxide (SnO₂) nanoparticles against Lactobacillus acidophilus and Streptococcus mutans, in comparison to traditional adhesives without nanoparticle infusion. Methods: A modified orthodontic adhesive was prepared by incorporating 1% w/w of tin dioxide and zinc oxide nanoparticles (SnO₂ + ZnO₂ NPs) into Transbond XT. This nanoparticle-enhanced composite was used to fabricate discs for assessing antibacterial activity against Lactobacillus acidophilus …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 230–239 Read article
-
Dynamic Analysis of Irregular Building with Box Type Shear Wall at Center under Different Type of Soil
Abstract: Building engineers are being shown to accept High rise construction due to increase shortage and land cost. The development of high-rise buildings presents many challenges with the type of lateral load. In High rise buildings getting better efficiency and the high-strength shear wall is an effective solution. The Optimum location of the shear wall depends upon the structural shape of buildings. For irregular structures, inner shear walls provide more strength …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Recyclable Vitrimer-Matrix Carbon Fibre Composites for Aerostructures: Reprocessing Efficiency and Retention of Mechanical Performance
Abstract: To begin, carbon fiber reinforced polymers (CFRP) have become an important part of the structural loading in many modern aircraft; however, due to their permanent cross-linking in thermosets, they cannot easily be restored after being retired. Vitrimers have been proposed as a solution since their Covalent Adaptable Networks (CANs), rearranged by associative exchange, may be reshaped, welded, repaired or dissolved without damaging the CFRP fibers. This paper reviews whether the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Polymer Chemistry-Driven Design of a Severable Dental Prophylaxis Instrument: Leveraging PEEK and Composites for Enhanced Functionality
Abstract: Polymer chemistry unlocks new possibilities for dental prophylaxis instruments by leveraging molecular design for enhanced functionality. This study explores Polyether Ether Ketone (PEEK), a semi-crystalline thermoplastic, in a novel instrument with a severable working end, featuring a tubular structure with internal screw threads (0.5–0.8 cm) anchoring replaceable elements via a threaded mechanism. PEEK’s aromatic backbone, alternating ether and ketone groups, yields a tensile strength of ~100 MPa, chemical inertness against …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 869–877 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
Utilization Waste Products as Reinforcement in Development of Composite Material: A Review
Abstract: In the modern world, businesses are responsible for producing a diverse range of waste products. Rice husks and eggshells are two examples of wastes that fall into this category. Both of these types of garbage are responsible for contributing to pollution in a variety of distinct ways. Eggshell, which is a common consequence of industrial operations, is one of the most significant contributors to the contamination of soil. This is …
Published in Journal of Polymer & Composites Read article
-
Optimizing Glass to Metal Composite Seal Performance: An integrated Approach with Artificial Neural Network, Multiple Regression, and Taguchi
Abstract: Composite materials, particularly glass to metal composites, are critical components in solar receiver tubes, where vacuum leakage can significantly compromise the efficiency of solar plants. This research addresses the technical barriers associated with the development of durable and high-quality glass to metal composite seals. We investigate the principles that can enhance the physical and chemical properties of these composite seals, focusing on the incorporation of TiO2 and MgO nanoparticles into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 418–435 Read article