Search
397 articles for “responses parameter”
-
Optimization of Response Parameter on Textile Machine Using Grey Relation Analysis
Abstract: Optimization is the one of the techniques used in manufacturing industry to achieve the best output condition, which is necessary for industry production at high quality in the minimum input cost. In this paper, we find out the optimal value towards the best production quality. There are many optimization techniques and one of them is Taguchi-based grey relation analysis method. In this experiment, the method is applied on L27 orthogonal …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 3, 2014 · pp. 1–10 Read article
-
A Study on Response Parameters of Injection Moulding Process in Polypropylene Plastic using Grey Relational Analysis
Abstract: The purpose of this research is to study multi-response optimization of injection moulding parameters and to verify the optimum parameters of polypropylene for achieving the best result. The four parameters taken for injection moulding are injection pressure, melt temperature, packing pressure and packing time. The experiments are plotted by using L27orthogonal array. Orthogonal array is generated with the help MINITAB-17. The effect of process parameters such as melt temperature, packing …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 3, 2019 · pp. 30–39 Read article
-
A Study on Responses Parameter of EDM Process in EN-353 Steel Using Grey Relational Analysis
Abstract: Electrical discharge machining (EDM) process is the most practically non-conventional machining processes for machining newly developed high strength alloys with high degree of dimensional accuracy and economical cost of production. The last decade has seen an increasing interest in the novel applications of this process, which is particular emphasis on the potential for surface modification. To gain these goals, the consideration is by optimizing the process parameters such as the …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 1, 2015 · pp. 32–40 Read article
-
Investigation of Physical Characteristics and Machining Parameters of Improved Al-SiC MMC Using Dry EDM Process for Aerospace Industries
Abstract: Aluminium-based composite is widely used in aerospace and automobile industries because it is lighter in weight; but the trouble is that it is easily worn-out and life of the components is decreased. To overcome these problems, aluminium silicon carbide composite material has been developed with good wear-resistance, hardness and lighter weight. Silicon carbide has good mechanical properties like wear resistance, hardness, toughness and high melting point. Silicon carbide weight fractions …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 1, 2018 · pp. 15–32 Read article
-
Prediction of Bead Geometry Parameters using Response Surface Methodology and Finite Element Analysis of Gas Metal Arc Welded Joints of Aluminum Alloy
Abstract: Gas Metal Arc welding process aims to produce welded joint with the excellent mechanical properties with minimum distortion and desired weld bead parameters. In welding, input process parameters decides the quality of weld joint. Manufacturer are facing problem of controlling the process input parameters to obtain a good welded joint with the bead geometry. Prediction of weld bead geometry play very important role in determining the quality of weld. This …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 23–35 Read article
-
Ameliorating Surface Roughness and Tensile Strength of ASA Fabricated Parts by Analyzing Significant FDM Printing Parameters Using Response Surface Methodology
Abstract: The constantly growing demand for acrylonitrile styrene acrylate (ASA) polymer in the automotive market to its use for fabricating different components such as dashboards, the interior, lights, and electrical components challenges manufacturers to continuously optimize its mechanical properties to meet consumer demand. Despite the widespread availability of three-dimensional (3D) printing techniques, research on the most efficient and cost-effective methods of producing ASA-printed components is still indispensable. Therefore, the purpose of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 1–12 Read article
-
Damage Assessment in Reinforced Concrete Structures
Abstract: Reinforced concrete structures are subjected to a pattern of loading in addition to deterioration with age during their service life, which lead to damage of the structure. Damage assessment is an integral part of structural health monitoring (SHM) which aims to detect, locate and quantify the damage as well as predict the remaining service ability of the structure. Damage assessment technique can be classified into either global or local methods. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 29–35 Read article
-
Multi-Response Optimization of Turning Parameters with Vikor-Entropy Method on Machining of AA6061-TiB2 In-Situ Composites
Abstract: In the manufacturing and metal cutting industries, the quality of the surface and strength is essential in defining the surface finish; an excellent surface finish indicates excellent quality in the product. The influence of machining parameters speed, feed and depth of cut on responses like material removal rate, surface roughness and Power consumption on turning of AA6061-TiB2 composites is investigated using the VIKOR-ENTROPY method. The effects of changing parameters on …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 256–268 Read article
-
Response Surface Approach of Optimization to study the Effects of Drilling Parameters in AISI-304 Stainless Steel
Abstract: The effect of cutting parameters specifically cutting speed, feed rate, drill depth and drill diameter during drilling of AISI-304 stainless steel material on automatic radial drilling machine (RM-62) at different level presents in this work. All the cutting parameters are modeled using response surface methodology (RSM). The impact of cutting speed, feed rate, drill depth and drill diameter on the machining time, average roughness and peak roughness is examined. Finally, …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 2, 2017 · pp. 21–32 Read article
-
STUDY ON EFFECT OF END MILLING PARAMETERS ON CUTTING FORCES USING RESPONSE SURFACE METHOD
Abstract: Now a day’s research over improvement of surface roughness on mechanical elements has become quite significant in the operational and aesthetical point of view. To enhance accuracy and precision, manufacturing firms are adopting automated systems in order to achieve manufacturing excellence. In the present work the effect of various process parameters like spindle speed, feed and cutting fluid composition on cutting forces in End milling process is investigated by using …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 62–72 Read article
-
Performance Based Seismic Evaluation of G+12 RCC Structures in Seismic Zone IV with and without Corner Shear Walls Considering Soil Types I, II, and III
Abstract: Seismic behavior of multi-storey buildings is significantly influenced by structural stiffness and supporting soil conditions. This study investigates the seismic response of a G+12 reinforced concrete building by comparing two structural configurations, namely buildings with shear walls and buildings without shear walls, under three soil conditions: Type I, Type II, and Type III soils. The analysis is carried out using the response spectrum method in accordance with IS 1893 (Part …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 1–14 Read article
-
Parametric optimization of end milling operation on EN24 – A Mapping Review
Abstract: The milling of EN24 hardened steels has been applied in many cases in production. The purpose of this review is to study the effect of influence of milling operation parameters such as cutting speed, feed and depth of cut on the material removal rate and surface roughness in milling of EN24 steel. The effect of milling operation parameters are evaluated for minimum surface roughness and maximizing material removal rate. Maximum …
Published in Journal of Production Research & Management · Vol. 8, Issue 3, 2018 · pp. 42–48 Read article
-
Optimization of Wear and Friction Parameters of Al-WC Composite Using Response Surface Methodology
Abstract: This paper aims to optimize the wear and friction parameters of Al-WC composite using response surface methodology. Initially dry sliding wear test on specimen of Al-0WC, Al-5WC, Al-8WC and Al-11WC composites were performed using pin-on-disc equipment under atmospheric conditions, with the varying parameters of the applied load 80KN and Sliding distance 6700m and the sliding velocity is kept constant of 3.34 m/s. The optimum parameters of wear mass loss and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 17–26 Read article
-
Exploring the Influence of Machining Parameters on Geometric Form and Orientation Controls (23 Design)
Abstract: This work explores the influence of machining parameters using on geometric form controls flatness and straightness as well as orientation control parallelism using an aluminum 6061 workpiece. Due to its good strength, machinability and cost- effectiveness, aluminum 6061 is widely used. In this experimental work, full factorial design is used and each factor has two levels. The response parameters chosen include flatness, straightness, and parallelism, which govern the form and …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 1, 2025 · pp. 10–16 Read article
-
Experimental Investigations on Concentric Flow Dry Ultrasonic Assisted Wire Electric Discharge Machining (CFDUAWEDM) Using Regression Analysis
Abstract: This paper presents an application of concentric flow mode of dry dielectric (compressed air) supply for ultrasonic assisted wire electric discharge machining process (CFDUAWEDM). The concentric flow mode of dielectric supply using ultrasonic assistance is expected to offers improved surface integrity, environmental and operator friendliness during wire electric discharge machining (WEDM) process. Experimental set up was developed wherein, the ultrasonic vibration was applied to the electrode wire using an ultrasonic …
Published in Trends in Machine design · Vol. 3, Issue 2, 2016 · pp. 33–43 Read article
-
Application of RSM on Performance Characteristics in Turning of Hard Porcelain Material
Abstract: This paper presents the effect of cutting parameters on Bending and Voltage during turning of Hard Porcelain Material on CNC turning machine (SINUMERIK802D). In this work, all the cutting parameters namely, Spindle speed, feed rate, angle of cut and depth of cut are modelled using Response surface methodology (RSM). The impact of all the cutting parameters on the Response parameters (Bending and Voltage) is examined. Finally, the result of developed …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 2, 2015 · pp. 39–49 Read article
-
Response Spectrum Analysis and Comparison of Seismic Parameters ofLow Rise, High Rise and Asymmetrical RC Structure with and Without Infill for Different Bay Dimensions
Abstract: The concrete block walls or brick masonry are widely used as partitions in world wide. Generally the effect of infill walls is not considered in the design process and istreated as non-structural components. The presence of infill walls has vital role in performance of building during earthquakes. Infill panels significantly increase stiffness and strength of the frames. This study provides the comparative study on summary of performance of low rise …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 1, 2020 · pp. 1–9 Read article
-
Optimization of Process Parameters for AISI 304 Using Micro-EDM Drilling Process Through Response Surface Method
Abstract: The increasing demand for micro-parts in high-tech products, such as micro-electromechanical systems (MEMS) applications and micro-electronic devices, has driven significant advancements in micromachining technologies. Among the various micromachining processes, the fabrication of accurate microholes and pins is critical for the performance and reliability of miniature components. Micro-hole drilling plays a vital role by enabling the production of deep holes with excellent straightness, roundness, and surface quality. It is widely used …
Published in International Journal of Manufacturing and Production Engineering · Vol. 3, Issue 1, 2025 · pp. 37–47 Read article
-
Optimization of Reaction Parameters for Biodiesel (Methyl Ester) Synthesis Using Surface Response Methodology
Abstract: The Polyoxo vanadate catalytic trans-esterification of waste cooking oil (WCO) was carried out by optimizing four reaction parameters which include: catalyst loading, methanol/oil ratio, temperature, and reaction time. These optimized parameters are 0.5 g, 0.8 g, and 1.2 g catalyst loading, 3:1, 6:1 and 9:1 methanol/oil ratio, 45°C, 60°C and 65°C reaction temperature, 45 min, 60 min and 90 min reaction time. The regression equation in the uncoded units of …
Published in OmniScience: A Multi-disciplinary Journal · Vol. 14, Issue 3, 2024 · pp. 20–28 Read article
-
Enhancing Performance of Hybrid Natural Fiber Reinforced Polymer: Insights into Processing, Characterization and Machining
Abstract: Natural fibre reinforced polymer composites (N-FRP) have gained popularity in recent years as an alternative to regular polymer composites, owing to growing environmental concerns. Natural fibers are becoming increasingly popular due to their outstanding properties such as flexibility, strength, compatibility with living creatures, and impact resistance. A notable application of natural fibers is in the medical industry, with the goal of producing cost-effective, sustainable, and long-lasting products. Combining different fibers …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 139–153 Read article