Search
121 articles for “response surface optimization.”
-
Response Surface Approach of Optimization to study the Effects of Drilling Parameters in AISI-304 Stainless Steel
Abstract: The effect of cutting parameters specifically cutting speed, feed rate, drill depth and drill diameter during drilling of AISI-304 stainless steel material on automatic radial drilling machine (RM-62) at different level presents in this work. All the cutting parameters are modeled using response surface methodology (RSM). The impact of cutting speed, feed rate, drill depth and drill diameter on the machining time, average roughness and peak roughness is examined. Finally, …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 2, 2017 · pp. 21–32 Read article
-
Sonophotocatalytic Degradation of Scarlet Red dye using Fe-Bi2O3 Catalyst and its Process Optimization by Response Surface Methodology
Abstract: The catalyst Fe-Bi2O3 was synthesized by ultrasound irradiation and used as a catalyst for the sonophotocatalytic degradation of scarlet red dye. The synthesized catalyst were characterized by SEM, XRD and DRS. SEM image reveals the formation of nanorod structure of the catalyst, XRD reveals the size of the catalysts were in nano range and DRS shows the blue shift in optical absorption for the Fe-Bi2O3 catalyst. The Fe-Bi2O3 was identified …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 2, 2016 · pp. 14–32 Read article
-
Optimization of Wear and Friction Parameters of Al-WC Composite Using Response Surface Methodology
Abstract: This paper aims to optimize the wear and friction parameters of Al-WC composite using response surface methodology. Initially dry sliding wear test on specimen of Al-0WC, Al-5WC, Al-8WC and Al-11WC composites were performed using pin-on-disc equipment under atmospheric conditions, with the varying parameters of the applied load 80KN and Sliding distance 6700m and the sliding velocity is kept constant of 3.34 m/s. The optimum parameters of wear mass loss and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 17–26 Read article
-
Parametric Optimization of Biocompatible Ti6AL4V Alloy on Selective Laser Melting for Enhanced Structural Support and Reduced Stress Shielding
Abstract: The Selective Laser Melting technique is widely employed in the production of complexly shaped end products for a range of industries, including biomedical, aerospace, automotive, and defence. SLM is a complicated manufacturing process since a lot of factors influence the characteristics of the items that are printed using it. The SLM printing of fully dense parts is becoming more and more popular for various high-end applications. Because of their biocompatibility …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 143–156 Read article
-
Parametric optimization of end milling operation on EN24 – A Mapping Review
Abstract: The milling of EN24 hardened steels has been applied in many cases in production. The purpose of this review is to study the effect of influence of milling operation parameters such as cutting speed, feed and depth of cut on the material removal rate and surface roughness in milling of EN24 steel. The effect of milling operation parameters are evaluated for minimum surface roughness and maximizing material removal rate. Maximum …
Published in Journal of Production Research & Management · Vol. 8, Issue 3, 2018 · pp. 42–48 Read article
-
Extraction and Characterization of Antioxidants from the Seeds of Ethiopian Avocado Variety, Pinkerton
Abstract: The objective of this study was to extract and characterize the antioxidants from the Ethiopian avocado seeds of the Pinkerton variety, using ethanol as a solvent. Response surface methodology (RSM) in combination with Box-Behnken experimental design with a three level, three-factor mixture design was used to optimize the extraction condition for assessing the maximum yield of antioxidant from the avocado seeds. Ethanol concentration (%, v/v), temperature (°C) and time (h) …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 49–56 Read article
-
Optimization Study by Response Surface Methodology and Artificial Neural Network on the Culture Parameters of Citric Acid Bioproduction from Sweet Potato Peels
Abstract: In the cause of this research work, two steps enzymatic hydrolysis of sweet potato peel was carried out respectively. The effect of α-amylase dose, reaction time, and reaction temperature and biomass weight on glucose concentration was investigated carefully. The response surface methodology (REM) predicted the highest reducing sugar concentration at liquefaction to be 74 g/L, at the following optimized conditions; temperature of 45°C, α-amylase dose 0.7 %v/v, biomass weight 22.345 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 30–38 Read article
-
Response Surface analysis to find optimum pull for a Multi-Purpose Agricultural Tool for Design and Fabrication
Abstract: Design and assembly of a multi-purpose agricultural tool is a major aspect that has to be developed, This is majorly in continuation with the fact that India has shifted its trend from just an agro-based country to homeland of major IT companies, but still one of its major income is through agriculture be it directly or indirectly. So, it’s an obvious concern that India’s agriculture should be modernized. More than …
Published in Trends in Machine design · Vol. 5, Issue 2, 2018 · pp. 9–13 Read article
-
Harnessing Marine Byproducts and Optimization of Biopolymer Extraction Quality Using Response Surface Methodology and Study of Its Physicochemical Properties
Abstract: Chitosan, a versatile biopolymer derived from chitin, holds immense potential across various industries owing to its antimicrobial, antioxidant, and biocompatible properties. This study aims to optimize the deacetylation process of chitin, sourced from shrimp shells, using Response Surface Methodology (RSM) to produce high-quality chitosan. The Box-Behnken Design (BBD) was employed to evaluate the effects of temperature, time, and alkali concentration on the degree of deacetylation (DD%), a key determinant of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 125–139 Read article
-
Optimization Study on Cr (VI) Removal by Response Surface Methodology using Artemia franciscana
Abstract: Response Surface Methodology was employed in the present investigation to obtain the optimized physical condition for the removal of Cr (VI) from the aqueous solution. The pH was varied from 8–12 and the salinity from 30–50‰. The pH of 10 and salinity 40‰ was found to be optimized physical condition for the 95% of Cr (VI) removal from the aqueous solution using Artemia franciscana by the process of bioaccumulation. Keywords: …
Published in Research and Reviews : Journal of Computational Biology · Vol. 7, Issue 1, 2018 · pp. 15–21 Read article
-
Optimization of Reaction Parameters for Biodiesel (Methyl Ester) Synthesis Using Surface Response Methodology
Abstract: The Polyoxo vanadate catalytic trans-esterification of waste cooking oil (WCO) was carried out by optimizing four reaction parameters which include: catalyst loading, methanol/oil ratio, temperature, and reaction time. These optimized parameters are 0.5 g, 0.8 g, and 1.2 g catalyst loading, 3:1, 6:1 and 9:1 methanol/oil ratio, 45°C, 60°C and 65°C reaction temperature, 45 min, 60 min and 90 min reaction time. The regression equation in the uncoded units of …
Published in OmniScience: A Multi-disciplinary Journal · Vol. 14, Issue 3, 2024 · pp. 20–28 Read article
-
Strength Prediction and Optimization of Portland Limestone Cement Blended with Metakaolin and Rice Husk Ash
Abstract: This study explores the effects of Rice Husk Ash (RHA) and Metakaolin (MK) on the compressive strength of Portland Limestone Cement (PLC) mortar, aiming to promote sustainable construction materials. RHA and MK, derived from agricultural and industrial byproducts, serve as supplementary cementitious materials (SCMs) that offer environmental benefits and improve cement properties. Using response surface methodology (RSM) and central composite design (CCD), the research optimized the ternary blend of PLC, …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 1–14 Read article
-
Parametric Optimization of boring process by alternate tooling head to improve productivity of GG25 cylinder liner using response surface methodology
Abstract: The manufacturing process are the heart of any industries. The process are getting renewed day by day to achieve a simple goal of efficiency. The paper states about the one of manufacturing process namely boring operation in material removal process and its optimization to increase the production on going in the industry. The boring process is used in here to enlarge the bore of cylinder liner which are also precision …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 27–30 Read article
-
Optimization of Process Parameters for Isopropylation of Toluene over Modified Zeolite using Response Surface Methodology
Abstract: Vapor-phase isopropylation of toluene with isopropanol has been investigated in a fixed-bed flow reactor under atmospheric pressure using N2 carrier gas over Cerium modified 13X zeolite catalyst. The main product of this alkylation reaction was p-cymene followed by meta-isomer, while ortho-cymene was negligibly formed. Response surface methodology was used to study the combined effects of temperature, reactant molar ratio and space time on the conversion of toluene and selectivity of …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 1, 2014 · pp. 22–30 Read article
-
Optimization of Tensile and Flexural Properties of PETG Filament in FDM 3D Printing Using Response Surface Methodology
Abstract: Now a days manufacturing trend has been changed from subtractive to additive. In additive manufacturing (3D Printing), layer by layer deposition occurs and final product can be obtained. The main advantages of additive manufacturing is to obtain customized product, complex geometry product. This research investigates the optimization of tensile and flexural Strength of PETG filament in Fused Deposition Modeling (FDM) 3-d printing by using of Response Surface Methodology (RSM). Specimens …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 39–58 Read article
-
Optimization of Process Parameters for AISI 304 Using Micro-EDM Drilling Process Through Response Surface Method
Abstract: The increasing demand for micro-parts in high-tech products, such as micro-electromechanical systems (MEMS) applications and micro-electronic devices, has driven significant advancements in micromachining technologies. Among the various micromachining processes, the fabrication of accurate microholes and pins is critical for the performance and reliability of miniature components. Micro-hole drilling plays a vital role by enabling the production of deep holes with excellent straightness, roundness, and surface quality. It is widely used …
Published in International Journal of Manufacturing and Production Engineering · Vol. 3, Issue 1, 2025 · pp. 37–47 Read article
-
Optimization of Machining Process Parameters in Hard Turning of AISI D3 Tool Steel
Abstract: Machining operation is still irrefutably vital process in manufacturing, that involves complex relation of input parameters (like cutting speed, feed rate, depth of cut, nature of cooling, etc.) to output parameters (like surface finish, tool life, tool wear, machining time, machining cost, etc.). Numerous efforts were noticed in literature, to relate these parameters with each other so as to implement cost effective machining with least efforts. This paper presents one …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 1, 2017 · pp. 23–30 Read article
-
Parametric optimization and validation of novel 3D scanning approach for sustainable manufacturing of patient-specific orthodontic retainers
Abstract: The purpose of the proposed study is to identify the ideal procedure parameters for 3D scanning a denture in order to produce customised orthodontic retainers that can be produced sustainably. However, pilot investigations rarely explore parameters like scanning angle, light intensity, or scanning distance. In order to lower acquisition error, the suggested study examines a method for forecasting the ideal values of the previously indicated scanning parameters. Based on the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 265–278 Read article
-
Sequestration of Cr(VI) by the Activated Carbon prepared from Coffee husk(CHAC)
Abstract: The potential of Coffee husks for the production of a low-cost activated carbon (CHAC) was investigated in this study. During the synthesis of the adsorbent, the concentration of the activating agent (H3PO4), impregnation ratio, carbonization temperature and holding time were optimized by Response Surface Method (RSM) using Box-Behnken design. Further, the application of coffee husk activated carbon for Cr (VI) adsorption from aqueous solution was investigated.
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 3, 2019 · pp. 8–16 Read article
-
Nanostructured Catalysts for Sustainable CO2 Reduction: Advancing Green Chemistry and Polymer Composites
Abstract: This study provides a comprehensive analysis of advanced nanostructured catalysts designed to enhance the efficiency of artificial photosynthesis for sustainable fuel production. We systematically evaluated a range of nanomaterials—including metal oxides, plasmonic nanoparticles, and carbon-based composites—to determine their effectiveness in converting solar energy into storable chemical fuels. The catalysts were synthesized via sol-gel, hydrothermal, and green methods, and their properties were thoroughly characterized using XRD, SEM, TEM, UV-Vis spectroscopy, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 175–181 Read article