Search
19 articles for “reservoir permeability”
-
Overcome reservoir heterogeneity challenges by utilizing rock typing techniques
Abstract: Once a field has been identified, and a general method of reservoir exploitation decided, there are several methods to achieve the reservoir management goal. Still, some ways may cost twice as much as others. The most critical operations to developing a field are drilling of wells, and it overemphasizes which in the early stages of field development. Identifying well position and reservoir properties arrange as the most critical step for …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 33–45 Read article
-
An Overview of Poroperm Relationship in the Recognition of Heterogeneity in Petroleum Reservoirs
Abstract: Reservoir heterogeneity is comprehended on different scales based on vertical and lateral variations in the hydrocarbon bearing sedimentary sequences. The two depositional systems, Sand-shale and carbonate with complex patterns based on properties of rocks help in deciding quality of rocks, the most important being the porosity permeability relationship. The intricate relationship of these two parameters if discussed in connection with sampling depth gives better understanding of variations in vertical direction …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 17–42 Read article
-
Relative Permeability Study in Part of Geleki Oil field of Upper Assam Basin
Abstract: Relative permeability is a critical parameter for evaluation of reservoir performance. Relative permeability is a direct measure of the ability of the porous medium to allow flow of one fluid when two or more fluids are present. This flow property is the composite effect of pore-geometry, wettability, fluid saturation, saturation history, reservoir temperature, reservoir pressure, overburden pressure, rock-types, porosity and permeability types. The relative permeability curves are very important in …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 9–14 Read article
-
A New Description of Multi-phase Flow Behavior at Boundary Layers of Low-permeability Porous Media
Abstract: At present, the recovery factor of low permeability oilfield in China is only about 20%, which is enormously lower than the recovery factor index of 60% by using water-chemical flooding in medium and high permeability layer. There are a lot of causes that resulted in low recovery factor, among them that the complex pore structure, tiny throat, large pore throat ratio and non-Darcy flow in low-permeability oil layer are the …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 1, 2013 · pp. 1–7 Read article
-
Structural and Hydrogeological Characterization of the Olkaria Dome Geothermal Field, Lake Naivasha Basin
Abstract: The Olkaria Dome Geothermal Field in the Lake Naivasha Basin is one of Kenya's principal geothermal resource areas, where fluid circulation and reservoir performance are strongly controlled by geological structures and hydrogeological conditions. This study integrates geological, structural, hydrogeological, mineralogical, and soil-gas data to characterize reservoir permeability and fluid flow pathways. Correlation of lithological units with drilling circulation-loss zones identifies highly fractured formations that enhance geothermal fluid movement. Mineralogical mapping …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 2, 2026 · pp. 28–49 Read article
-
Pressure Data Analysis and Multilayer Modeling of A Gas-Condensate Reservoir
Abstract: Kailastila gas field located at Golapgonj, Sylhet, is one of the largest gas fields in Bangladesh. It produces a high amount of condensate along with natural gas. For the high values of GOR, it may be treated as a wet gas at reservoir condition. Three main sand reservoirs are confirmed in this field (upper, middle and lower). In this study, it has been shown that reservoir parameters of this gas …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 7–15 Read article
-
Pressure Data Analysis and Reservoir Parameter Estimation of Kailastilla Gas Field (Well No. KTL-01 and KTL-02)
Abstract: Well testing has been the subject of research for many decades. Well tests are performed in order to estimate reservoir properties. These estimations are needed to predict the amount of oil or gas that can be produced, and to determine a strategy how to produce this predicted amount. The current method to estimate the reservoir properties seems cumbersome and inefficient. Also, uncertainty regions of the estimated properties are not yet …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 92–102 Read article
-
Effects of Fracture Properties on Oil Recovery in Tight Reservoirs
Abstract: Unconventional reservoirs, characterized by low permeability are gradually becoming a force to reckon with in today’s world owing to the rapid depletion of conventional resources. However, low oil production from tight reservoirs can be mitigated by implementing hydraulic fracturing. In this study, Schlumberger’s eclipse-100 simulator was used to simulate various scenarios in order to determine the best fracture geometry and the effects of fracture properties on oil recovery. The properties …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 12–31 Read article
-
Performance of Water Injection in Oil Rim Reservoir Recovery Factor
Abstract: This study examines the potential improvements in recovery factors in optimizing oil production from oil rim reservoirs through water injection and without water injection (i.e. primary production) scenarios in the development strategies of the oil rim reservoirs. A generic simulation model developed from ECLIPSE dynamic simulator was used as core representative of oil rim reservoirs to experiment production optimization with and without water injection. Reservoir data of permeability, oil rim …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 3, 2014 · pp. 31–38 Read article
-
Fitting Relative Permeability’s Curves Based on Laboratory Production Data for A Thermal Composite Core Flooding Experiment
Abstract: Numerical simulators are effective tools for an adequate understanding of models geological and dynamic properties under which enhanced oil recovery techniques are investigated. Core flooding experiments are usually conducted for calibrating simulated rock and fluid properties against actual test results at micro-scales, and for further scaling up processes to the reservoir scale. In this paper, laboratory experiments data were used as input for a numerical simulator to study the effect …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 41–56 Read article
-
A Cyclic Injection of High Temperature N2-foam in Fuyv Reservoir
Abstract: Steam stimulation has already been proved as an important thermal recovery technology. In Daqing, the development and management of high-heterogeneous heavy oil reservoirs plays an important role in stabilizing the oil output. To combine the good features of steam injection and cyclic injection, a cyclic steam flooding has been conducted in the Fuyv reservoir, Daqing. This paper is to present a detailed process of the cyclic-steam injection. The target Fuyv …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 1–12 Read article
-
Experimental Study on the Impact of Polymer (PAM) in Enhancing Oil Recovery in Upper Assam Basin Oil fields
Abstract: The Upper Assam Basin, one of India’s most mature and extensively exploited hydrocarbon provinces, is experiencing declining oil production due to reservoir depletion and unfavorable crude oil–brine–rock (COBR) interactions. In this context, alkali–polymer (AP) flooding has emerged as a promising chemical enhanced oil recovery (EOR) strategy. AP flooding reduces interfacial tension (IFT) through in-situ surfactant generation by alkali and improves sweep efficiency via polymer-based mobility control, typically using polyacrylamide (PAM). …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 283–296 Read article
-
A Critical Review of Hydraulic Fracture Propagation in Shale Gas Reservoirs
Abstract: The successful exploration and development of unconventional shale gas reservoirs was possible with advances in hydraulic fracturing and horizontal drilling. Hydraulic fracture treatments open these natural fractures and create a fracture network in gas shales. However, the fracture propagation is not fully understood as of now. A critical review of hydraulic fracture propagation in shale gas formations is presented in this paper. Effects of pertinent factors on hydraulic fracture propagation …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 1–17 Read article
-
Evaluation of Chemical Application as Pilot to Improve Oil Production from High Viscous Oil in Sandstone Reservoir
Abstract: Chemical injection stimulation is one of worldwide proven technologies for viscosity reduction and mobility enhancement. The principle mechanism is to reduce heavy oil viscosity by injecting of active chemical agent solution into reservoir as huff and buff practice, the agent solution is act at near wellbore area by remove plugging of heavy organic material, Energy support due to large quantity of stimulation liquid being injected into the formation, viscosity reduction …
Published in Journal of Petroleum Engineering & Technology Read article
-
Simulation Studies on Effect of Parameters on to the Matrix Acidizing
Abstract: Matrix acidizing entails introducing an acid solution into the formation at a pressure lower than the fracture pressure in order to dissolve some of the minerals present. The major objective of removing the formation damage close to the wellbore, therefore restoring the natural permeability and greatly rising the well productivity. This paper is a simulation study on matrix acidizing of both sandstone and carbonate reservoirs using MATLAB software. Design parameters …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 25–34 Read article
-
Numerical Investigation of the Osmatic Flow Impact on the Load Recovery and Early Well Performance
Abstract: The complexity of shale system coupled with the mystery of low fracturing fluid recovery has puzzled many researchers. Field reports from hydraulic fracturing operations performed on shale formation have highlighted the low recovery of the fracturing fluid. The fate of the hydraulic fracturing fluid is still controversial issue. However, literature has attributed the low load recovery to either trapping into the natural or created micro-fracture or imbibition to the matrix. …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 52–64 Read article
-
Geohydrological Investigation of a Lake: Case Study of Lake of Sayf Thulfiqar
Abstract: AbstractA reservoir is defined as an enlarged natural or artificial lake. A reservoir, also, means storage pond or using dam to store water. An artificial lake namely "Sayf Thulfiqar" is decided to be constructed artificially in the region of Bahar Al-Najaf in Najaf province in Iraq for storage and aesthetic purposes. The soil of the region is unsaturated above water table and it is mainly sand as classified according to …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 11–19 Read article
-
Chemical Sand Consolidation: An Overview
Abstract: Sand production from reservoir is a critical issue related to oil/gas fields because it gives rise to many serious problems in oil/gas production. Sand production from wells can damage the surface and subsurface facilities as well as it can reduce the well productivity, thus it can have adverse effects on economy of oil production. Sand control is requisite to economical extraction of oil/gas from the unconsolidated formations. So the development …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 21–34 Read article
-
Mud Acid Effect on Fines Migration Problem Using a Newly Developed Al/Zr-Based Clay Stabilizer (A): Mitigation Can Happen
Abstract: Sandstone reservoirs exhibit severe fines migration problems subsequent to conventional mud acid (HCl: HF) treatments. The acid treatment proved to be effective for a relatively short period of time, with a sudden production decline owing to either that mud acid spent rapidly in close proximity to the wellbore, causing clays to migrate into the acidized area and re-plug the formation; or that the mud acid system actually weakens the structure …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 11–29 Read article