Search
19 articles for “pozzolanic replacement”
-
Influence of Agricultural Waste Materials in Concrete: A Sustainable Approach
Abstract: Urbanization and resource depletion have intensified the need for sustainable alternatives to traditional construction materials. The concrete industry, a major contributor to environmental issues due to cement production, is turning to waste materials to mitigate its impact. This review paper focuses on the use of agricultural waste as a partial replacement for cement and aggregates in high-strength concrete (HSC), with an emphasis on its influence on both fresh and hardened …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 26–32 Read article
-
Enhancing Concrete Performance With GGBFS: An Analysis of Strength Characteristics at Various Replacement Levels
Abstract: This study investigates the effect of ground-granulated blast furnace slag (GGBFS) as a partial replacement for cement on the mechanical properties of concrete. The primary objective was to assess the compressive, flexural, and split tensile strengths, along with the modulus of elasticity, at different replacement levels of cement with GGBFS and at distinct curing ages of 7, 28, and 56 days. Concrete mixes were prepared by replacing cement with GGBFS …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 121–138 Read article
-
Review of Research on Pozzolanic Materials for Cement Blending and Concrete Applications
Abstract: The growing environmental concerns associated with cement production, particularly its high carbon footprint, have driven research into sustainable alternatives such as supplementary cementitious materials (SCMs) derived from agricultural and industrial waste. This study synthesizes findings from recent investigations into the pozzolanic potential of basil plant ash (BPA), rice husk ash (RHA), and stockpiled fly ash (FA), evaluating their processing methods, microstructural characteristics, and performance in concrete applications. BPA, being derived …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article
-
Performance Evaluation of Concrete with Binary and Ternary Blends of Fly Ash, Silica Fume, and Fiber Reinforcement
Abstract: This study evaluates the effect of ground granulated blast furnace slag (GGBS) as a partial replacement for cement on the mechanical properties of concrete, focusing on compressive and split tensile strength. Concrete mixes were prepared with GGBS replacement levels of 0%, 25%, and 50% and subjected to different curing methods, including water curing, steam curing, and conceal curing. These curing methods were selected to investigate their impact on hydration, strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 40–45 Read article
-
Assessing Concrete Strength Through Substituting Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: This study investigates the strength characteristics of concrete by partially replacing cement with bentonite powder and coarse aggregate with steel slag. The research aims to evaluate the mechanical performance of concrete through compressive strength, split tensile strength, and flexural strength tests. Bentonite powder is substituted at varying levels of 0, 10, 20, and 30%, while steel slag is incorporated consistently at 60% as a replacement for coarse aggregate. The objective …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 1–8 Read article
-
From Waste to Strength: Hybrid Binder Approach for Sustainable M25 Concrete
Abstract: The growing demand for concrete in infrastructure development has led to increased cement consumption, raising serious environmental concerns due to high energy use and carbon dioxide emissions correlated with cement manufacturing. In this context, the use of industrial residues as partial substitutions for cement has achieved deep focus as a sustainable construction strategy. The current investigations experimentally explore the strength and quality performance of concrete produced using a hybrid binder …
Published in Journal of Construction Engineering, Technology & Management · Vol. 16, Issue 1, 2026 · pp. 24–32 Read article
-
Enhancing Mechanical and Durability Properties of Coconut Shell Concrete Using Fly Ash
Abstract: The increasing demand for sustainable and lightweight construction materials has driven research into alternative aggregates for concrete production. This study investigates the mechanical and durability properties of coconut shell (CS) concrete with varying percentages of fly ash replacement. The research evaluates compressive strength, split tensile strength, water absorption, and workability to determine the feasibility of CS concrete as a structural material. Experimental findings indicate that incorporating 10% fly ash (CSF10 …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 19–24 Read article
-
Experimental Study on Mechanical and Durability Properties of Concrete Using Mineral Admixtures
Abstract: This study explores the partial replacement of OPC with Fly Ash (FA), Rice Husk Ash (RHA), Glass Powder (GP), Palm Oil Fuel Ash (POFA) at varying percentages of 10%, 20%, 30% with the addition of 1% chemical admixture with water-cement ratio of 0.45. The influence of these replacements on the fresh properties, mechanical and durability properties is evaluated at 7, 28, and 56 days of curing. The results indicate that …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 148–160 Read article
-
Empowering Concrete: Enhancing Strength and Durability with Coal Bottom Ash
Abstract: The utilization of coal bottom ash, an industrial waste byproduct, as a sustainable alternative to river sand in concrete production has gained increasing attention due to environmental concerns and the need for resource optimization. This study examines how incorporating coal bottom ash into concrete mixtures, either partially or entirely replacing river sands, affects different properties. These properties include the workability of fresh concrete, as well as its compressive strength, splitting …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 Read article
-
To Study the Effect of Partial Replacement of Cement with Marble Powder and Partial Replacement of Sand with Surkhi
Abstract: The construction industry worldwide has made remarkable progress in building innovative structures using different materials. Today’s increasing population demands more sustainable ways of living. Waste matter produced in the day-to-day life as well as industrial waste has become a cause of concern. Many waste materials have been used in construction industry like flyash, saw dust, natural fibers residue etc. Keeping in mind the above concern a low cost, environment friendly …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 46–54 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
A Review on Using Recycled Aggregate with Various Pozzolans in Geopolymer Concrete
Abstract: Reducing the use of natural resources is crucial to solving the global issue of CO2 emissions. Concrete can be produced sustainably by using recycled aggregates and geopolymer binders, which are environmentally benign alternatives to traditional components. Carbon footprints can be reduced by using these materials instead of ordinary Portland cement and natural aggregates. Among all the combinations, recycled coarse aggregates (RCA) and geopolymer concrete have garnered attention as a viable …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 486–493 Read article
-
A systematic Review on Laterite based geopolymer
Abstract: Laterite based geopolymer has been widely studied as a sustainable alternative to Portland cement in construction industry. However, its thermal performance is still a challenge due to the low thermal conductivity and low temperature resistance. In this paper, recent studies on the improvement of thermal performance of laterite based geopolymer using additives are reviewed. The additives studied include organic materials, metal oxides and natural fillers. The effect of these additives …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 172–183 Read article
-
Study on Partial Replacement of Cement with Pinus Fiber and Nano Silica in M30 Concrete Paver Blocks: A Fiber-Reinforced Polymer-Cement Composite Approach
Abstract: This study investigates the partial replacement of cement in M30 grade concrete paver blocks using nano silica and Pinus fiber, with a primary focus on mechanical performance, sustainability, and long-term durability and promoting sustainability. Portland cement, a major contributor to global CO₂ emissions, can be partially substituted using supplementary materials to create eco-efficient construction solutions. Nano silica, due to its high pozzolanic reactivity and ultrafine size, improves the microstructure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 63–76 Read article
-
Cementing Sustainability: Utilizing Waste Foundry Sand to Enhance Concrete Performance and Reduce Environmental Impact
Abstract: The incorporation of waste foundry sand into concrete production represents an environmentally conscious and cost-effective approach. This method involves substituting discarded foundry sand for a portion of traditional fine aggregates in concrete mixtures. The primary objective is to address environmental concerns associated with waste disposal while simultaneously achieving cost efficiency in construction materials. By integrating waste foundry sand into concrete, this practice promotes sustainability by reducing landfill waste and conserving …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 13–21 Read article
-
Performance Evaluation of Modified Concrete Incorporating Fly Ash, Silica Fume, Rice Husk Ash, and Calcium Nitrate
Abstract: The growing demand for sustainable and high-performance concrete has led to the incorporation of supplementary cementitious materials (SCMs) and chemical admixtures to enhance mechanical and durability properties. This study investigates the effect of 15% fly ash, 10% silica fume, 10% rice husk ash, and 3% calcium nitrate as a partial replacement for cement in M25 and M30 grade concrete. Experimental results demonstrate that the modified concrete exhibited an increase in …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 35–39 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Comparative Study of Compressive and Flexural Strength of Concrete by Partial Replacement of Cement by Nano Silica Powder in M40 Grade Concrete
Abstract: Concrete, a fundamental building material, traditionally relies on cement as a primary binder. However, the environmental and economic challenges associated with cement production have driven the search for alternative materials that can partially replace cement while maintaining or enhancing concrete's performance. This study focuses on the effects of Nano Silica Powder as a partial substitute for cement in M40 grade concrete, an advanced solution aimed at reducing the carbon footprint …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 18–25 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article