Search
22 articles for “pitting corrosion”
-
Effect of Pulse Current Micro Plasma Arc Welding Parameters on Pitting Corrosion Rate of AISI 316Ti Sheets in 3.5 N NaCl Medium
Abstract: Austenitic stainless steel sheets are used for fabrication of components, which require high temperature resistance and corrosion resistance such as metal bellows used in expansion joints in aircraft, aerospace and petroleum industries. When they are exposed to seawater after welding they are subjected to corrosion as there are changes in properties of the base metal after welding. The corrosion rate depends on the chemical composition of the base metal and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 3, 2016 · pp. 12–24 Read article
-
Optimizating Pitting Corrosion in 3.5 N NaCl Medium of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets Using Genetic Algorithm
Abstract: Austenitic stainless steel sheets have gathered wide acceptance in the fabrication of components, which require high temperature resistance and corrosion resistance, such as metal bellows used in expansion joints in aircraft, aerospace and petroleum industry. In case of single pass welding of thinner sections of this alloy, pulsed current micro plasma arc welding (PCMPAW) was found beneficial due to its advantages over the conventional continuous current process. This paper highlights …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 132–142 Read article
-
Investigation on pitting corrosion rate of Micro Plasma Arc Welded Titanium (Ti-6Al-4V) alloy sheets in KBr solution using TOPSIS
Abstract: Titanium is having good anti-corrosion properties in both basic and acidic medium. However, when it is subjected to severer heating processing like welding, there is a possibility of corrosion formation at the weld joint. In the present work Pulsed current MPAW is used for joining 0.5 mm thick Titanium (Ti-6Al-4V) alloy sheets. Peak Current, Base Current, Pulse Rate and Pulse Width are considered as input parameters and fusion zone corrosion …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 37–53 Read article
-
Corrosion Behavior of Ferritic Steel, Austenitic Steel and Low Carbon Steel Grades in Sugarcane Juice
Abstract: The objective of the present study is to evaluate the corrosion behavior of ferritic grade AISI 444 and to compare its performance with the austenitic grade AISI 304 and low carbon steel AISI 1010 in the corrosive medium of raw sugarcane juice. General corrosion and pitting corrosion behavior of AISI 444, AISI 304 and AISI 1010 steels in sugarcane juice was investigated using traditional weight loss method and cyclic polarization …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 43–56 Read article
-
Review on Corrosion of Welded Joints
Abstract: Corrosion is one of the major problems generally faced by welded joints made from various welding processes. Welding resistance of welded joints can be improved with addition of anticorrosive elements in the base metal. However certain other factors like fabrication technique, welding practice, welding sequence, moisture contamination, organic or inorganic chemical species oxide film and scale, weld slag and spatter, incomplete weld penetration or fusion also contribute for corrosion of …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 23–30 Read article
-
Inhibitors for steel implements
Abstract: Oil and gas industries use corrosion inhibitors made of active inhibitor intermediate, carboxylic acid, demulsifier and surfactant in aromatic solvent, and alcohol. High pressure and high temperature oil well flow lines are made of steel pipes. These pipes are prone to corrosion from gaseous contamination, oil quality, flow rate, developed shear stress of turbulence, pump spar techniques, etc. Carbon dioxide to carbolic acid conversion at below 100oC temperature appears to …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 1–11 Read article
-
Understanding the Corrosion Behaviour of Graphite in Peat Environment for Environmental and Sustainability Applications
Abstract: Graphite, which is one of the most remarkable carbon materials for industrial applications, is a heat exchanger component material in the phosphoric acid industry, bipolar layer or electrode material in vanadium redox flow batteries, electrode material for advanced oxidation processes, electrode material for lead-acid batteries, electrode material in fuel cells and microbial fuel cells, and more interesting, as moderator or core material in nuclear reactors used. Corrosion, one of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 728–737 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Polymeric Coating Applied for Corrosion Protection of Mild Steel in Corrosive Medium
Abstract: Mild steel is coated with a polymer layer of polybutadiene for protection. However, this coating does not effectively safeguard the metal in environments containing moisture, sulphur dioxide, or chloride. These pollutants interact with the polybutadiene-coated surface, creating a highly corrosive atmosphere. Moisture condenses on the coated metal surface and absorbs sulphur dioxide, forming sulphuric acid. This acid initiates both chemical and electrochemical reactions with the polymer-coated metal, accelerating the corrosion …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 49–53 Read article
-
Influence of Mechanical Parameters on Corrosion Behavior of Metal Coupons in Simulated Environmental Conditions
Abstract: This study investigates the influence of mechanical parameters—namely applied stress, surface roughness, and deformation history—on the corrosion behavior of metal coupons exposed to corrosive environments. Mild steel and aluminum alloy specimens were prepared with controlled variations in tensile stress, polishing grades, and cold-working levels to simulate real-world mechanical influences. These coupons were immersed in a 3.5% NaCl solution under ambient conditions, and their corrosion rates were monitored over a 30-day …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 6–12 Read article
-
Study on Variation of Bond using Anti Corrosive Reagents on Reinforcing Steel Bar
Abstract: Variation of bond stress with different anti corrosive reagent was determined. When bar is embedded in concrete it is corroded in course of time and corrosion products form pit or holes on the surface of reinforcing bar and reduce cross sectional area of steel and also reduce bond capacity. To protect corrosion, different anti corrosive reagent are available in the market. But the effect of bond, of reinforcing bar with …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 1, 2014 · pp. 22–36 Read article
-
Steel Structural and Functional Characteristics Focusing on Corrosion Mechanisms
Abstract: This research article examines steel structural and functional characteristics, focusing on corrosion mechanisms and inhibitor protection strategies. Steel corrosion affects numerous industries, causing significant economic losses and safety risks. Fundamental electrochemical processes behind various corrosion forms including uniform, pitting, crevice, galvanic, intergranular, and stress-induced corrosion are explained. The chapter highlights the steel industry's importance while investigating how corrosion impacts performance and longevity. Protection methods discussed include material selection, environmental modification, …
Published in International Journal of Minerals · Vol. 2, Issue 2, 2025 · pp. 25–34 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Corrosion and Corrosion Protection of Cast iron due to Bio-organism
Abstract: Cast iron is a high tensile strength metal. It is generally used for making tools, pipe fitting, electrical fitting equipment and rail track. It interacts with corrosive substances to develop electrochemical cell on their interface. Corrosive substances are acids, bases, salts, bio-wastes, particulates and pollutants. These substances produce hostile medium for materials. These harmful wastes discharge by industries, households, agricultural, urbanization, development of infrastructure, construction works, thermal power stations, hydropower, …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 105–114 Read article
-
Corrosion and Corrosion Protection of Unio in Carbonic Acid Medium
Abstract: Unio is a calciferous animal, and its outer surface is made of calcium carbonate. It usually happens in sources of sweet water. They create carbonic acid by absorbing carbon dioxide. It changes the pH of sweet water sources thus water becomes acidic. It develops corrosive environment for Unio. Carbonic acid interacts with Unio to form corrosion cells on the interface of Unio. This acid oxidizes calcium carbonate into calcium ions …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 1, 2025 · pp. 22–31 Read article
-
Characterization of Strength of Aluminum (Al 6063-T6) After Corrosion
Abstract: Aluminum are frequently used as light weight structure in various nautical design. One of them is the ship structure design where sever environment of saline water influences the damage of the structure and one among them is pitting. In this paper, an experimental verification of strength and impact of corrosion effect on Al-6063–T6 aluminum was presented. The specimens were exposed to saline water for various duration like 500 hrs, 750 …
Published in Journal of Experimental & Applied Mechanics Read article
-
CHARACTERIZATION OF STRENGTH OF ALUMINUM (Al 6063-T6) AFTER CORROSION
Abstract: Aluminum are frequently used as light weight structure in various nautical design. One of them is the ship structure design where sever environment of saline water influences the damage of the structure and one among them is pitting. In this paper, an experimental verification of strength and impact of corrosion effect on Al-6063 – T6 aluminum was presented. The specimens were exposed to saline water for various duration like 500hrs, …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 3, 2021 · pp. 48–61 Read article
-
Monitoring the Effectiveness of Water-Based Plants for the Inhibition of Metal
Abstract: The temperature performance profile of the plant extracts shows that inhibition efficiency increased with increasing temperature of the system until at about 323K at 9.00hrs immersion time where a decline in inhibition efficiency occurred implying the opposite at higher temperatures and longer immersion time. Corrosion rate parameters changed with rise in temperature and exposure – immersion time. Plots of rates of corrosion against the volume(s) of the test inhibitor(s) in …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 37–47 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article