Search
41 articles for “photovoltaic panel”
-
Prediction and Evaluation of Photovoltaic Panel Performance for Low Solar Radiation Concentration and Variable Topology
Abstract: This paper studies and analyzes the performance of photovoltaic (PV) panels for a flat-side mirror solar radiation low-concentration design. The system consists of two side mirrors concentrating surface that reflects solar radiation onto the PV panel area, increasing the solar radiation flux up to 177% regarding solar radiation peak at the Earth's surface. Three PV panel configurations are analyzed: conventional, a PV panel with attached phase change material (PV-PCM), and …
Published in Trends in Electrical Engineering · Vol. 14, Issue 3, 2024 · pp. 14–25 Read article
-
Polymer-Based Nanocomposite Coatings for Enhancing Solar Photovoltaic Panel Efficiency
Abstract: Environmental factors such as dust deposition, ultraviolet (UV) radiation, and surface reflection significantly reduce the performance of solar photovoltaic (PV) modules. This study investigates the development and performance evaluation of polymer-based nanocomposite coatings designed to improve the optical and surface properties of PV panel glass. A hybrid nanocomposite coating containing TiO₂ and SiO₂ nanoparticles dispersed in a polymethyl methacrylate (PMMA) matrix was synthesized using the sol–gel technique and deposited through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 490–497 Read article
-
Cogeneration System in Concentrated Photovoltaic Panels
Abstract: This study analyses the behavior of hybrid systems composed of photovoltaic panels (PV) and phase-change materials (PCM) under solar concentration conditions, aiming to generate electric and thermal energy in water simultaneously (cogeneration). This work looks for system performance improvement while increasing the generated power and energy by the PV panel and the thermal system in unison. The study shows the increase in power and energy delivered by the prototype compared …
Published in Journal of Thermal Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 1–14 Read article
-
Optimizing Fin Parameters to Enhance Passive Heat Dissipation in Photovoltaic Panels
Abstract: This study explores passive cooling techniques to enhance the thermal management of photovoltaic (PV) modules, which is crucial for maintaining efficiency. A computational fluid dynamics (CFD) model, using ANSYS Fluent, was developed to evaluate three fin shapes: rectangular, trapezoidal, and triangular, attached to the back of PV modules. The study varied parameters such as fin count, thickness, and length to determine optimal configurations for cooling. Among the designs, triangular fins …
Published in International Journal of Radio Frequency Innovations · Vol. 2, Issue 2, 2024 · pp. 25–35 Read article
-
Cooling test's impact on photovoltaic solar panel systems
Abstract: Temperature changes have a massive effect on the performance of photovoltaic (PV) solar panels that are currently extensively used for the conversion of solar power into electrical energy. The output of solar systems is limited, especially in hot climates, as heating of the panel causes output voltage and efficiency to drop. The paper explores the effects of cooling on the quality and performance of photovoltaic (PV) solar panels. In this …
Published in International Journal of Electronics Automation · Vol. 4, Issue 2, 2026 Read article
-
Design and Implementation Solar Based Uninterruptible Power Supply System
Abstract: The increasing reliance on continuous power supply in various sectors necessitates innovative solutions to address power outages and reduce dependency on conventional energy sources. The design and execution of a solar-powered uninterruptible power supply (UPS) system are presented in this study. The system integrates photovoltaic (PV) panels, a battery storage unit, and an inverter to ensure a seamless power supply during grid failures. With the use of an inverter, the …
Published in Journal of Control & Instrumentation · Vol. 15, Issue 2, 2024 · pp. 1–6 Read article
-
Application of GIS tools to the Improvement of Energy Supply in PV Rooftop Installations
Abstract: Present work studies the energy supply from photovoltaic (PV) installations in industrial conglomerates using the rooftops as a surface to install the PV panels. The study is based on a modelling procedure that takes into account the specific characteristics of the rooftop, shape, size, azimuth and inclination, using GIS tools to identify these parameters for every single rooftop. Modelling has been developed modifying the tilt angle of the PV panel …
Published in Journal of Remote Sensing & GIS Read article
-
Smart Control Systems for Solar Electric Vehicles: A Microcontroller and Sensor-Based Approach
Abstract: The use of electric vehicles has significantly increased during the last ten years. Some actions being taken to halt climate change and reverse the effects of global warming include the following. An electric car that is powered by solar energy—generated by solar panels mounted on the outside of the vehicle—is known as a solar vehicle. As everyone knows, middle-class families cannot afford the constantly growing costs of gas and new …
Published in Journal of Microelectronics and Solid State Devices · Vol. 11, Issue 3, 2024 · pp. 33–43 Read article
-
Design and Implementation of a Four-Port DC to DC Converter for a Hybrid Energy System
Abstract: A four-port DC-DC converter has been developed for integrating a hybrid energy from renewable sources system into an AC microgrid. This converter is particularly suitable for AC microgrid applications that require system-level power management. It boasts a straightforward design, making it effective for interfacing sources with varying voltage and current characteristics. The converter is created to connect a battery bank, a photovoltaic (PV) panel, a wind turbine, and an inverter, …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 2, 2024 · pp. 47–60 Read article
-
Development of a Self-Cleaning Mechanism for Solar Panels to Enhance Efficiency
Abstract: On Earth, solar energy is the most plentiful source of energy. As it happens, the heat generated by the fusion of helium on the outermost part of the Sun additionally happens to be renewable. This energy is becoming popular because of natural advantages. In digital circuit design, AI can aid in logic synthesis and analog circuit design, AI can help in sizing transistors. The tools used to transform daylight into …
Published in Journal of Mechatronics and Automation · Vol. 11, Issue 1, 2024 · pp. 1–10 Read article
-
Heat Sink-PCM Device for PV Efficiency Improvement
Abstract: This paper is focused on the development of a second stage of a previous work where the PV panel efficiency is improved by using a hybrid system made up of a PCM attached to the rear side of the panel. This evolved stage incorporates a heat sink unit to improve the distribution of the heat removed from the panel; this improvement reduces the elapsed time to reach the steady state …
Published in Journal of Thermal Engineering and Applications Read article
-
Development and Performance Evaluation of GO–ZnO/PU Hybrid Nanocomposite Coatings for Improved Optical Transmission, Cooling, and Self-Cleaning in PV Systems
Abstract: The performance of solar photovoltaic (PV) modules with time is affected by thermal heating, dust buildup, and exposure to ultraviolet (UV) light; as a result, the power loss increases rapidly during the use condition. In this study, a polyurethane (PU) nanocomposite, fabricated with graphene oxide and zinc oxide (GO–ZnO), is invented and examined. Improvements in heat management, light transmission, and dirt resistance are planned for PV glass surfaces. The nanocomposite …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 243–249 Read article
-
Control System for Off-Grid Multiple Hybrid Renewables
Abstract: This article focuses on designing a renewable energy control system for a household self-consumption network, combining solar and hydroelectric energy to meet the energy demand of a standard home. We conducted an exhaustive analysis of each energy source, evaluating parameters such as solar radiation, optimal tilt of photovoltaic panels, and conversion system efficiency. Equipment for this system is selected based on the characteristics obtained in the study. Hydroelectric energy is …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 3, 2024 · pp. 20–34 Read article
-
Management of Green Composite for Clean and Green Energy Conversion with Thermal Analysis: Fiber Reinforcement Composites
Abstract: Using green composite materials helps people identify better, more environmentally responsible options to synthetic polymers. Depending on the state of the material and additions, green composites that are used for clean energy are lighter than ordinary metals that carry heat quickly. These methods test fiber-reinforced composites in diverse conditions using heat analysis and then do a thorough method analysis. The composites have a polymer matrix that is healthy for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 900–905 Read article
-
Smart Solar Tracking System for Maximizing Energy Output
Abstract: This paper presents the design and development of a dual-axis solar tracking system using a stepper motor and light- dependent sensors to maximize solar energy capture. The proposed system continuously aligns the photovoltaic panel perpendicular to the sun’s rays, thereby improving overall power-generation efficiency. A complete prototype was developed and experimentally tested. To assess system performance, experimental testing was carried out in a variety of lighting and environmental settings. When …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 17, Issue 1, 2026 Read article
-
IoT-Connected Transparent Conductive Polymer–Silver Nano-wire Electrodes for Real-Time Performance Monitoring of Flexible Solar Panels
Abstract: Flexible photovoltaic technologies have emerged as promising energy harvesting solutions for wearable electronics, portable power systems, and Internet of Things (IoT)-enabled smart devices. However, the limited mechanical durability of conventional transparent conductive electrodes and the lack of integrated real-time monitoring restrict their long-term reliability. This study presents an IoT-connected transparent conductive polymer–silver nanowire (PEDOT:PSS–AgNW) hybrid electrode for flexible solar panels, combining high optoelectronic performance with continuous wireless performance monitoring. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Automatic Solar Panel Cleaning Robot Using Wi-Fi
Abstract: Addressing fuel shortages stands as one of the most critical global challenges today, alongside the significant issue of water scarcity for both urban and rural populations. A considerable portion, around 60-70%, of the country's electricity demand is fulfilled by burning wood and agricultural waste. Solar energy is the most abundant renewable energy on earth which doesn’t pollute the environment while producing the energy. Solar power, harnessing renewable energy from gentle …
Published in Journal of Mechatronics and Automation · Vol. 11, Issue 2, 2024 · pp. 6–11 Read article
-
Optimization and CFD Analysis of Fin-Enhanced Cooling Systems for Improved PV Efficiency
Abstract: This study is about optimizing and doing a CFD (Computational Fluid Dynamics) analysis of fin-enhanced cooling systems to improve the efficiency of photovoltaic (PV) systems. Photovoltaic (PV) panels are sensitive to temperature changes; the temperature influences the performance and lifespan of these panels. High temperatures cause their electrical output to reduce, thereby limiting their performance. In order to address this problem, several coolants such as air, liquid, phase change materials, …
Published in Journal of Power Electronics and Power Systems · Vol. 15, Issue 1, 2025 · pp. 19–29 Read article
-
Solar Panel Defect Detection Using Geospatially-Aware Deep Learning framework
Abstract: Large-scale photovoltaic (PV) systems demand reliable inspection techniques to maintain efficiency, as manual methods remain labor-intensive and inconsistent. This study introduces a geospatially informed deep learning framework for defect detection and localization in PV panels from drone and satellite imagery. The framework incorporates an adaptive tiling mechanism that adjusts tile boundaries according to object size, reducing information loss and enhancing detection performance. In addition, coordinate transformation between image pixels and …
Published in Journal of Remote Sensing & GIS · Vol. 17, Issue 2, 2026 Read article
-
CFD Analysis and Optimization of Fin-Enhanced Cooling Systems for Enhanced PV Performance
Abstract: This study examines how the performance of photovoltaic (PV) panels can be improved by means of passive cooling techniques through fin configurations. Computational Fluid Dynamics (CFD) simulation, validated with experimental data, was used to analyse the thermal behaviour of PV modules integrated with different fin shapes, namely rectangular, trapezoidal, and triangular geometries. It was found that trapezoidal fins yield better thermal performance, lowering the panel temperature by more than that …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 1–15 Read article