Search
31 articles for “mobile antenna”
-
Performance Analysis of Single Band PIFA for 4G/LTE Mobile Communication Networks
Abstract: This paper presents a Planer Inverted F Antenna (PIFA) for Fourth Generation (4G) Long Term Evaluation (LTE). The proposed antenna is designed on FR4 substrate and the dimension is 22.5 mm x 18.5 mm x 2.8 mm. The Antenna covers the LTE 40 frequency band application from 2.3–2.4 GHz (resonance at 2.35 GHz). Different performance parameters: return loss, VSWR, radiation pattern, current distribution, gain and efficiency are analyzed. The proposed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 3, 2016 · pp. 1–7 Read article
-
Design of Ultra-Wide Band Slotted PIFA for Wireless Devices
Abstract: The design of an ultra-wideband planar inverted-F antenna (PIFA) is proposed for mobile phone applications in this paper. The different slots are introduced on radiating patch and ground plane. The volume of the radiating antenna is 40x40x3.5 mm3 which is small as compared to reported work. The ultra-wide bandwidth with acceptable return loss –6 dB is obtained from 4.6 to 30 GHz with good matching and radiation characteristics. Different performance …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 2, 2016 · pp. 1–6 Read article
-
Broadband, M- shaped Rectangular Cutting Slotted Antenna at 2.5 GHz for Mobile and WLAN Application
Abstract: In this paper, the authors have discussed M-shaped cutting slotted antenna for mobile and WLAN applications. After designing the antenna on 2.5 GHz frequency, the authors used the dielectric substrate 4.4, loss tangent 0.0012 and having the substrate height 1.6 mm and the antenna is showing the bandwidth 52.4%; the maximum return loss is −14.5 db.
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 1, 2015 · pp. 5–8 Read article
-
Design of a Multiband Antenna with Rectangular and Circular Slots for 5G Mobile Technology
Abstract: AbstractThis paper presents a microstrip patch antenna for 5G mobile communication. Requests for mobile communication arise because of rapid growth in mobile users. So, users need more features like high data rate, good communication and reduced traffic on their mobile phones. These requirements can be met using 5G technology. 5G technology offers very high bandwidth, reduced latency, broadband spectrum, improved QoS and a better capacity. 5G operates from 24 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 30–34 Read article
-
EBG Technology and Applications; A Review
Abstract: This present paper concentrates on applications of Electromagnetic band gap (EBG) technology that is operating at microwave and sub mm wave frequencies. Some of examples of Electromagnetic band gap configurations in the region of microwave are shown, that includes array antennas, high precision GPS, mobile telephony, wearable antennas and diplexing antennas. A 500 GHz dipole configuration and a novel heterodyne mixer are shown as examples for sub millimeter wave region. …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 1, 2015 · pp. 21–36 Read article
-
Evaluation of SAR and Temperature Elevation in Human Head for Advanced Wireless Services (AWS) Application
Abstract: In this paper, the specific absorption rate (SAR) and the temperature rise in the SAM phantom human head model as a consequence of the exposure to radiation of planar inverted F (PIFA) mobile handset antenna has been estimated at Advanced Wireless Services (AWS) band downlink frequency range. Biological hazards on human head owing to electromagnetic wave (EMW) exposure in advanced wireless services has been analyzed by computing the temperature rise …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 3, 2016 · pp. 19–24 Read article
-
Triple Band PIFA Antenna Using The DGS Method
Abstract: In this paper, a new design of a triple band Planner Inverted –F Antenna (PIFA) with DGS, for mobile and wireless communication systems is presented. The PIFA antenna consists of ground plate, patch antenna, feeding port and shorting plate connected to the ground plate. The designed antenna has been simulated with the help of the CST (computer Simulation Technology) software microwave studio 2010. The simulated results calculated for the resonant …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 2, 2014 · pp. 9–16 Read article
-
Design and Simulation of Triple Band Microstrip Patch Antenna for Ku-band, K-band and Ka-band Applications
Abstract: AbstractThis paper represents a microstrip patch antenna for future 5G-communication technology. The proposed antenna designs are simulated and their performances are analyzed for different parameters like lower return losses, higher gain, voltage standing wave ratio (VSWR), current distribution, far field radiation and wide bandwidth performance for the tri-frequency band operation in Ku band (12–18 GHz),K-band (18–27 GHz) and Ka-band (27–40 GHz) as per the specified IEEE standard. The proposed antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 1, 2020 · pp. 26–33 Read article
-
Study The Effect on Bit Error Rate (BER) for Elevated Signal to Noise Ratio (SNR) in IOT Based Systems Using Cooperative Communication
Abstract: AbstractCooperative communication is the future of wireless and mobile communication. The diversity antenna technology that can be utilized by cooperative communication can improve the quality of the signal received by a mobile. The mobile nodes can further improve signal quality by using multiple input multiple output systems. The cooperative communication is the best way to increase the availability of signals which has become very difficult after restrictions on the establishment …
Published in Current Trends in Signal Processing · Vol. 10, Issue 1, 2020 · pp. 8–14 Read article
-
Direction of Arrival Estimation in Mobile Communication Systems using MUSIC Algorithm
Abstract: AbstractAdaptive antenna arrays use multiple antenna elements to form directional patterns in order to improve the performance of wireless communication systems. The antenna arrays also have the ability to estimate the Direction-of-Arrival (DoA) of the signals received from the desired transmitters as well as the directions of interference signals. The results of DoA estimation are then used to adjust the weights of the adaptive Multi-Input Multi-Output (MIMO) antenna so that …
Published in Journal of Communication Engineering & Systems · Vol. 3, Issue 2, 2013 · pp. 20–27 Read article
-
Performance Analysis of Flying Ad Hoc Network with Different Antennas Using Ricean Fading
Abstract: AbstractWith regards to FANET, utilization of directional antenna can to a great extent decrease the radio interference, in this way enhancing the use of wireless medium and thus the system throughput. Execution of FANET is low under the omnidirectional antenna system contrasted with smart antenna system when Ricean fading model is utilized. Directional antenna covers huge zone and transmits extensive no. of packets, since it centers in the desired direction …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 2, 2018 · pp. 1–7 Read article
-
Effect of Notching on the Return loss of T-shaped Microstrip Patch Antenna for Wireless Communication System
Abstract: AbstractWith the loading of a pair of notches, a T-shaped slot and a pair of rectangular slots, novel bandwidth enhancement of microstrip antenna is demonstrated. The design is fed through a single coaxial probe. The proposed antenna is a modification of a simple T-shaped antenna which provides good radiating characteristics with enhanced bandwidth. The proposed antenna covers the S band and is used for many wireless applications. The proposed antenna …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 2, 2017 · pp. 7–11 Read article
-
Performance and Improvement of Antenna Designs in Modern Wireless Communication System
Abstract: AbstractIn this paper, the cell innovation and the remote correspondence innovation is creating and enhancing quickly. The reception apparatus goes about as the scaffold between the client terminal and the base station controller. Being a key segment of the remote correspondence framework, the reception apparatus' fundamental capacity is to communicate and to get electromagnetic waves. It will, to an expansive degree, influence the quality and the speed of the correspondence. …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 3, 2017 · pp. 5–10 Read article
-
A Review on Wearable Textile Antenna
Abstract: In today’s world, importance of wearable textile antennas has gained importance for healthcare and pervasive applications. Utilization of wearable textile materials for the development of microstrip antenna segment has been rapid due to the recent miniaturization of wireless devices. The use of wearable textile antennas is increasing rapidly in wireless applications. A wearable antenna is meant to be a part of the clothing used for communication purposes, which includes tracking …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 3, 2015 · pp. 37–41 Read article
-
A Survey on Recent Microstrip Patch Antenna for Navigational Application
Abstract: ABSTRACTSince last so many years microstrip patch antenna is one of the important fields for antenna design. For a different application of satellite communication in which prize, structure simple installation process is one of the key requirement low profile antenna is good to consider. Microstrip antennas is also fulfill the requirements of mobile communication as well as wireless communication. For navigational application the few important parameters are there like compact …
Published in Journal of Communication Engineering & Systems · Vol. 9, Issue 1, 2019 · pp. 55–59 Read article
-
Wideband Microstrip Slot Antenna Using Shape Blending Algorithm
Abstract: For the effective wireless communication over long distances, the antennas with wideband operation and narrow beam widths are the requirements for the evolving modern mobile devices. This paper presents the design and analysis of the wideband patch antenna with slot using shape blending algorithm. The major advantage of this algorithm is to optimize the shape of the radiating element by applying Heaviside function to improve the performance characteristics of the …
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 1, 2022 · pp. 19–27 Read article
-
Overview AI-Driven Antenna Technologies and Privacy- Preserving Methods for Next-Generation 6G Wireless Systems
Abstract: The next generation of wireless communications, 6G, will be built on the convergence of artificial intelligence (AI) and advanced antenna systems. AI-driven antennas are poised to address the unprecedented requirements for data rate, reliability, adaptability, and ubiquity in future networks. An overview of current advancements in AI-enabled antenna systems for 6G networks is provided in this study. From traditional base station deployments to distributed, cell-free, and user-centric frameworks, it examines …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 13, Issue 1, 2026 · pp. 28–34 Read article
-
High Gain Antenna Array (2x1 and 4x1) Design for WLAN Application
Abstract: Micro-strip antennas became very popular in 1970s primarily for space borne applications. Today they are used for government and commercial applications. These antennas consist of a metallic patch on a grounded substrate. The metallic patch can take many different configurations. However, the rectangular and circular patches are most popular because of ease of analysis and fabrication, and their attractive radiation characteristics, especially low cross-polarization radiation. In high performance aircraft, spacecraft, …
Published in Journal of VLSI Design Tools and Technology · Vol. 8, Issue 2, 2018 · pp. 1–8 Read article
-
N-Shape Dielectric Resonator Antenna for Wireless Communication
Abstract: A new compact dielectric resonator antenna (DRA) for ultra-wideband (UWB) is presented and studied. This antenna is designed on FR4 substrate with dielectric constant of and overall size of proposed DR antenna is 20×35 mm2. The dielectric resonator of N-shape is only of 5.12 mm thickness and has a very low permittivity constant (10.2). The simulated DR antenna operating from 4.4 to 11.7 GHz covers most of the existing wireless …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 2, 2016 · pp. 13–18 Read article
-
Use of Microwaves in Wireless Charging of Mobile Phone
Abstract: The foremost objective of this present scheme is to make the recharging of the mobile phones independent of their manufacturer and battery make. In this paper a new scheme has been made so as to make the recharging of the mobile phones is done by design as you talk in your mobile phone. This is done by use of microwaves. The microwave signal is transmitted from the transmitter along with …
Published in Journal of Microelectronics and Solid State Devices · Vol. 2, Issue 2, 2015 · pp. 21–25 Read article