Search
44 articles for “micro-crack”
-
AI-Integrated Graphene-Modified Polymer Interfaces for Real-Time Crack Detection and Autonomous Healing in Smart Concrete Structures
Abstract: This study presents the design and development of a graphene-reinforced multifunctional polymer composite interface engineered for structural reinforcement, self-sensing, and autonomous healing applications in cementitious systems. A thermosetting polymer matrix embedded with graphene nanoplatelets (0.25–1.5 wt.%) was developed to establish a conductive polymer nano-composite network. Electrical characterization confirmed a distinct percolation threshold at ~0.6–0.8 wt.%, beyond which a sharp increase in conductivity was observed due to the formation of interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 30–42 Read article
-
Graphene-Derived Reinforced Polymer Composites for Self-Healing and Durability Enhancement in Concrete Structures
Abstract: This study presents a matrix-centric polymer-composite repair binder: an epoxy–polyamide network reinforced with graphene derivatives (GO/rGO, 0.1–1.0 wt%). The polymer drives function via segmental mobility that closes microcracks, while 2D-filler topology densifies the interphase, improves load transfer, and enforces tortuous moisture pathways. Adhesion was high: pull-off (ASTM D4541) reached 13.5 MPa at 2.0 mm displacement; slant-shear (ASTM C882) reached 12.1 MPa at 2.8 mm, with greater deformation capacity (zero stress …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 77–91 Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
Assessment of Matrix Cracking and Fiber Breakage in Hybrid Composite Materials.
Abstract: Hybrid composite materials, combining two or more distinct fiber or matrix constituents, have emerged as advanced structural solutions for aerospace, automotive, marine, and civil engineering applications. However, their complex microstructure makes them susceptible to multiple interacting damage mechanisms, particularly matrix cracking and fiber breakage. This study provides a comprehensive assessment of these damage modes, emphasizing their initiation, evolution, and combined effects on the mechanical integrity of hybrid composites. Matrix cracking …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article
-
Role of Artificial Intelligence in Structural Health Monitoring-A Brief Evaluation
Abstract: Artificial intelligence (AI) refers to the capacity of a machine or a computer to ‘think’ or reason in the way a human would, utilizing experience, learned facts, and flexible rules to solve problems that may not fit the standard outlines for a normal algorithm. From this follows the utilization of AI in various sectors, such as the information technology (IT) industry, media, healthcare and medicine, logistics, environmental sustainability, finance, business, …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 1, 2026 · pp. 34–39 Read article
-
Evaluation of T-stress using FEM in an Unsymmetrical Cracks Emanating from a Hole Placed Centrally in a Thin Plate
Abstract: Studying the impact of higher order terms of the William’s series expansion on fracture mechanics problems has received more attention in recent years. Research has demonstrated that the constant term T-stress has a significant impact on the stress and strain fields around the crack tip. In response to mixed mode (I/II) loading, a number of fracture criteria had been developed to characterize failure in linear elastic bodies. When evaluating the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 09–20 Read article
-
Investigating the Surface Defects and Structural Integrity of 3D Printed Hydrogen Storage Cylinders in UAV Applications
Abstract: This research explores the processing and manufacturing challenges of 3D printed polymer composites for high-pressure hydrogen storage in UAVs. The study focuses on addressing surface integrity and structural robustness issues inherent in additive manufacturing. Finite Element Analysis (FEA) was conducted on four thermoplastic polymer ABS, PET-G, HDPE, and Nylon to assess their mechanical performance under 35 MPa of pressure. Results revealed that PET-G and ABS provided better stress distribution and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 161–191 Read article
-
Finite Element Modelling of Contact Stresses in Helical Gear Systems
Abstract: Helical gears are widely used in modern power‐transmission systems because of their high load‐carrying capacity, smooth meshing action, and increased overlapping of gear teeth. However, the design of helical gear pairs is constrained by contact stresses generated at the mating tooth surfaces, which can lead to surface fatigue (pitting), micro-cracking, and ultimately gear failure. Traditional analytical methods, such as those of the American Gear Manufacturers Association (AGMA) or International Organization …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 35–39 Read article
-
Effect of Aging on the Performance of Polymer Composite: A Review
Abstract: The exceptional robustness, corrosion resistance, and lightweight design, polymer composites (PCs) are crucial to modern engineering escalating the utilization of polymer composite in structural applications including aerospace engineering, automobile engineering, etc. With a greater number of positive aspects, the polymer composite also deteriorate by different environment conditions with their exposing duration considered as aging of polymer composites. However, a variety of elements influencing the ageing process determine their long-term performance. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 752–768 Read article
-
Development of Bio-Based Polymer Composites for Sustainable Construction Materials
Abstract: The demand for eco-friendly sustainable construction materials has gained significant interest in the development of bio-based polymer composites as ecologically suitable alternatives to traditional petrochemical-based polymer composites. The environmental problems associated with non-biodegradable, high-carbon-footprint polymer composites make their more bio-based counterparts an attractive option that offers both environmental and structural benefits. To evaluate environmental impact and industrial feasibility, a comprehensive life cycle assessment was performed. The methodology adopts optimized bio-based …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 194–208 Read article
-
Role of Fatigue and Creep in Structural Damage: A Comprehensive Review
Abstract: Fatigue and creep are two critical degradation mechanisms that significantly influence the structural integrity and longevity of engineering materials. These phenomena arise due to different loading and environmental conditions but often coexist in various industrial applications, leading to severe material degradation over time. Fatigue primarily results from cyclic loading, where repeated stress variations induce microstructural damage and crack initiation, ultimately causing catastrophic failure. Conversely, creep occurs under sustained stress at …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 22–26 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Study on Partial Replacement of Cement with Pinus Fiber and Nano Silica in M30 Concrete Paver Blocks: A Fiber-Reinforced Polymer-Cement Composite Approach
Abstract: This study investigates the partial replacement of cement in M30 grade concrete paver blocks using nano silica and Pinus fiber, with a primary focus on mechanical performance, sustainability, and long-term durability and promoting sustainability. Portland cement, a major contributor to global CO₂ emissions, can be partially substituted using supplementary materials to create eco-efficient construction solutions. Nano silica, due to its high pozzolanic reactivity and ultrafine size, improves the microstructure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 63–76 Read article
-
A Comprehensive Review of Green Hybrid Polymer–Inorganic Composite Systems Incorporating Palm Tree Ash and Titanium Dioxide
Abstract: The increasing requests on sustainable and high performance systems have motivated extensive investigations on polymer-based hybrid systems with bio-derived and/or functional inorganic fillers. In this review, the importance of palm tree ash (PTA) and titanium dioxide (TiO₂) as synergistic fillers for polymer–inorganic hybrid composites, particularly about structure–property relations, interfacial adhesion and durability performance, is discussed. Agricultural waste-derived palm tree ash (PTA) plays as a silica-rich filler which not only aids …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1811–1820 Read article
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Polymer-Modified Fly Ash Concrete as A Sustainable Cementitious Composite for Low-Carbon and Durable Infrastructure
Abstract: There is a need for sustainable cementitious composites in the construction industry which can help in reducing carbon emission and also increase the durability of the constructed infrastructure. The utilization of fly ash can not only benefit the environment, but also by adding polymer modifiers, a high-performance and low-carbon composite material polymer modified fly ash concrete (PMFAC) can be produced. The study examines the engineering potential and sustainability of PMFAC …
Published in Journal of Polymer & Composites · Vol. 14, Issue 6, 2026 Read article
-
Phase – Field Modeling of Brittle and Ductile Fracture Under Complex Loading Conditions
Abstract: Phase-field modeling has emerged as a powerful computational framework for predicting fracture behavior in engineering materials, offering a unified description of crack initiation, propagation, branching, and coalescence without the need for explicit crack tracking. This study presents an in-depth examination of phase-field modeling applied to both brittle and ductile fracture under complex loading conditions, including multiaxial stress states, cyclic loading, thermal gradients, and dynamic impact. The phase-field approach regularizes the …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 13–18 Read article
-
Crack Propagation Analysis in Metallic Alloys: A Comparative Study of Traditional and Advanced Materials
Abstract: A vital component of materials science and engineering, crack propagation analysis is essential to determining the structural integrity and dependability of materials. Designing safe and long-lasting structures for a variety of sectors required an understanding of how cracks begin, spread, and interact with a material's microstructure. To guarantee the performance, safety, and dependability of materials in a variety of applications, crack propagation analysis is essential. It offers insightful information about …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 33–41 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article