Search
104 articles for “mechanical and microstructural properties”
-
Influence of Tib2 Wt. % on the Microstructural and Mechanical Properties of In-Situ Processed Stir-Cast Metal Matrix Composite of Al-6061
Abstract: Currently, there is an increasing trend in the automotive and aerospace industries towards the adoption of lighter and stronger materials to reduce weight and enhance fuel efficiency. Metal matrix composites must be developed in order to increase the overall performance of automobiles and aircraft as a result of this transition. Among the various composite materials employed, Aluminium Matrix Composites (AMCs) are frequently utilised to meet stringent industrial requirements. The purpose …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 655–661 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
A Review on The Role of Nanoparticles in Modifying Mg Alloys and Composites
Abstract: Reviewing and assessing magnesium's uses in the automobile sector, which have the potential to greatly improve fuel efficiency and environmental preservation, is the goal of this study. The report provides an overview of magnesium alloys' present benefits, drawbacks, technological obstacles, and future prospects in the automobile sector. The development of magnesium matrix composites has advanced to a new level thanks to the magnesium matrix nanocomposites' exceptional mechanical qualities. Dispersing nanoparticles …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 24–32 Read article
-
Experimental Studies on the Mechanical and Microstructural Properties of Sustainable Concrete Incorporating Palm Oil Industrial Waste
Abstract: Diving into the world of concrete, normal concrete is widely used in construction but poses environmental challenges due to significant carbon dioxide emissions from cement production. Incorporating oil palm shells (OPS) and palm oil fuel ash (POFA) into concrete offers a sustainable alternative, utilizing waste products from the palm oil industry and reducing environmental impact. Experimental studies have examined the use of OPS and POFA as partial replacements for coarse …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 19–40 Read article
-
Investigation of microstructure and mechanical properties of multi-pass friction stir processing on precipitation hardened aluminum alloy
Abstract: In the present study, multi-pass friction stir processing of aluminum AA2014-T651 alloy is per-formed with one and four passes. The multi-pass processing is performed at a tool rotational speed of 1000 rpm with a traverse speed of 63 mm/min. Microstructural characterization of fric-tion stir processed specimens indicated a significant grain refinement with equiaxed grains in the four pass specimen. Microhardness and tensile strength of the multi-pass specimen decreases with the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 339–349 Read article
-
Effect of Thermal Conditions on Microstructure and Mechanical Properties of AA5083 Processed by Equal Channel Angular Pressing
Abstract: A commercial AA5083 with an initial grain size of 210 μm was given an ultrafine-grained structure using the equal channel angular pressing (ECAP) technique under die design as patented. The identical sample underwent two successful passes through the die at 473 K, with each passage causing the sample to rotate 90° along its own longitudinal axis. After just one pressing, the microstructure was comparatively homogeneous. It was made up of …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 49–64 Read article
-
Red Mud Particles' Impact on the Mechanical Properties and Microstructure of AA6005 Composites for Brake Rotor Applications
Abstract: There is increasing focus on utilizing industrial waste as reinforcement in metal matrix composites, driven by the demand for eco-friendly and cost-effective materials in automotive applications. With an emphasis on their possible use in braking rotors, this study examines how red mud particles affect the microstructure and mechanical characteristics of AA6005 aluminum alloy composites. Red mud, a byproduct of the Bayer process, is a good low-cost ceramic reinforcement because it …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 573–581 Read article
-
Impact of Mould Material on Microstructure and Mechanical Properties of Aluminium Castings: A Comparative Study with Aluminium Matrix Composites
Abstract: Casting has a wide industrial usage because it allows manufacturing complicated forms even at a comparatively low cost. Issues like transfer of heat through the interface of the mould and the metals, the rate of solidification, and the characteristics of the mould material have a powerful impact on the quality of cast products. This study measures the influence of various mould substances on the mechanical characteristics of aluminium castings. Sand, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 9–18 Read article
-
Development and Characterization of Pseudo-Elastic Ternary Cu-Al-Be Shape Memory Alloy and Its Scope as Shape Memory Hybrid Composites
Abstract: This research investigated the potential of the Cu-11.95Al-0.51Be shape memory alloy (SMA) for vibration damping applications. This specific composition of the alloy was selected to ensure the presence of the austenite phase (ß-phase) and to evaluate the pseudo-elastic (SE) behavior. This research explores the design, fabrication, and characterization of a pseudo-elastic ternary alloy. The key parameters examined in this study were the alloy phase and pseudo-elastic behavior. Other important factors, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 370–385 Read article
-
An overview of dissimilar metals welding by cold metal transfer technique
Abstract: Cold Metal Transfer (CMT) welding has emerged as a promising technique for joining dissimilar materials, offering enhanced weld quality and mechanical properties. This review article explores the application of CMT welding in joining different metal alloys, focusing on two significant cases: magnesium-aluminium and aluminium-stainless steel combinations. CMT welding minimizes intermetallic compound formation and produces high-strength joints in magnesium-aluminium combinations. CMT welding with a friction-surfaced aluminum coating offers strong metallurgical bonding …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 167–174 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Influence of Die Design Parameters and Mechanical Properties of AA5083 Through Equal Channel Angular Pressing Technique
Abstract: Refinement of the grain structure in bulk Materials is achieved using the Equal Channel Angular Pressing process. The material is pass through a die in this procedure that has two channels that meet at a particular angle. Finer grains are formed as a result of the material's deformation when it passes through die. The creation of ultra-fine grains is influenced by a number of die design characteristics. The effects of …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 2, 2024 · pp. 33–47 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: Inorganic molecules undergo a chemical reaction that results in the production of a brand-new building material known as geopolymer concrete. Otherwise known as an inorganic aluminohydroxide polymer, geopolymer is made mostly from by-products like fly ash and geologically derived silicon (Si) and aluminium (Al). It is a superior building material for the future because of its great mechanical qualities, significant chemical resistance (attack by magnesium or sulphate), low shrinkage and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 46–51 Read article
-
Enhancement of Mechanical Properties in Eutectic Al-Si Alloy Matrix Composites Reinforced with Kyanite and Graphite via Stir Casting
Abstract: The purpose of this work is to enhance the mechanical performance of a eutectic Al–Si alloy by incorporating hard ceramic (kyanite) and soft solid lubricant (graphite) reinforcements using a liquid-state stir casting route. Metal matrix composites were fabricated with kyanite contents of 2, 4, and 6 wt.% and a constant 2.5 wt.% graphite. Their microstructures and mechanical properties were systematically evaluated. The microstructure was examined using optical microscopy and energy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 90–100 Read article
-
Experimental Investigations on Aluminium Composites Materials Using Stir Casting Process
Abstract: In physical operations, accoutrements in motorcars and aeronautical machine factors, aluminium and its alloys are extensively used. In this study an effort is made to ameliorate the properties of aluminium essence matrix compound (A356) for manufacturing of machine rudiments taking High Tensile strength, Hardness, Wear resistance and low coefficient of friction, aluminium alloy (A356) reinforced with aluminium oxide, graphite and silicon carbide. In the current work, A356 as base metal …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 302–323 Read article
-
Review on Severe Plastic Deformation Techniques for Bulk Materials: Deformation Behavior and Properties
Abstract: This paper presents a detailed review of the efficient application of Severe Plastic Deformation for the fabrication of ultra-fine-grained and nanostructured crystalline bulk materials. Severe Plastic Deformation allows substantial grain refinement while largely preserving the original dimensions of the workpiece, making it especially suitable for ductile materials capable of sustaining very high strains under elevated hydrostatic pressure prior to failure. The study investigates the grain refinement mechanisms involved in Severe …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 40–72 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article