Search
36 articles for “loss circulation”
-
Integrated Rock Typing and Rock Mechanics Studies for Median Line Principle Optimization
Abstract: Once a field has been identified, and a general method of reservoir exploitation decided, there are several methods to achieve the reservoir management goal, but some ways may cost twice as much as others. The most critical operations to developing a field are drilling of wells, and it overemphasizes which in the early stages of field development. Petroleum wells have changed character in recent decades, as compared to earlier times. …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 21–32 Read article
-
Plus Slotted Circular Patch Antenna for WiMax/WLAN Applications
Abstract: A wideband compact circular patch microstrip antenna is presented for various wireless systems such as WLAN and WiMax applications. The proposed antenna has been fabricated and the return loss bandwidth is measured. The simulated and measured antenna such as return loss, bandwidth and gain are presented. The Experimental result shows that the proposed antenna presents a bandwidth of 78.81% with the maximum gain of 6.2 dBi.
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 38–43 Read article
-
Performance Evaluation of Tympanostomus Fuscatus (Periwinkle) Shell Powder as Alternative to Silica Flour in High Temperature Well Cementing Operation
Abstract: The effect of high temperature on cement slurry is a problem in the oil and gas drilling industry. Over the years, silica flour was used to prevent the strength of cement that results from high temperature effect. But, the silica flour is imported and not environmentally friendly. Hence, the need for local material that can serve as alternative becomes imperative. periwinkle shell (Tympanostomus fuscatus) was tested in the laboratory to …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 1–11 Read article
-
Drilling Fluid Characterization (Filtration Test)
Abstract: This report explores the formulation and testing of a water-based drilling mud used in drilling operations, where fluid circulates through the drillstring and returns to the surface. The study mixes 315 ml of water with 35 ml of corn oil to create the drilling mud and investigates the role of barite in increasing mud density to maintain a hydrostatic pressure capable of managing formation pressure. The findings reveal that increasing …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 17–26 Read article
-
Optimization of Characteristics of a Simple Microstrip Circular Patch Antenna using Rotable Slot
Abstract: In this paper, we have designed a simple circular patch antenna which radiates at 2.8 GHz. A slot is introduced and is rotated along the center axis. We have noticed that the frequency of the antenna is varied as a function of slot orientation. An optimal slot angle is determined based on the return loss and then the slot, patch dimensions are optimized to increase the realized gain and return …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 3, 2015 · pp. 31–36 Read article
-
A New Dual Side Cut Corner Circularly Polarized Rectenna 2.45 GHz with DGS
Abstract: This paper introduces a new dual side cut corner circular polarized (CP) high efficiency rectifying antenna (Rectenna) array. The Rectenna consists of a truncated square patch antenna and a rectifying circuit. The Rectenna use a micro-strip patch antenna as a frequency 2.45 GHz and gain of 31.29 dB. The Rectenna circuit has a low pass filter (LPF) the maximum RF to DC conversion efficiency of the Rectenna is 68%.
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 3, 2015 · pp. 19–23 Read article
-
Designing of Circular Patch Antenna Modified by Metamaterial Structure
Abstract: AbstractThis finding is an outcome of the research carried out on the patch with the introduction of metamaterial. A “Dual Split Hexagonal Ring” metamaterial structure is implemented in the ground plane to modify the parameters of patch antenna i.e., circular. This recommended antenna operates on 2.42 GHz. Circular patch alone was not efficient and cannot be applicable for any applications, therefore a dual ring split metamaterial structure was implemented to …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 3, 2018 · pp. 1–5 Read article
-
A Ponder & Sedulousness Of Legion Shale Stabilizing Materials In Aqueous Based Drilling Fluid During The Process Of Borehole Strengthening
Abstract: Drilling fluid used while drilling the layers of shale will have the potential of reacting with water which tends to increase stickiness, induce swelling and promote sloughing of the borehole. This results in the reduction of drilling fluid circulation, increased mud loss, increase in torque and drag, reduction in lubricity. This will ultimately result in the increase of Non-Productive Time (NPT) during drilling which in turn increases Capital Expenditure (CAPEX) …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 35–40 Read article
-
High Gain Antenna Array (2x1 and 4x1) Design for WLAN Application
Abstract: Micro-strip antennas became very popular in 1970s primarily for space borne applications. Today they are used for government and commercial applications. These antennas consist of a metallic patch on a grounded substrate. The metallic patch can take many different configurations. However, the rectangular and circular patches are most popular because of ease of analysis and fabrication, and their attractive radiation characteristics, especially low cross-polarization radiation. In high performance aircraft, spacecraft, …
Published in Journal of VLSI Design Tools and Technology · Vol. 8, Issue 2, 2018 · pp. 1–8 Read article
-
Solar Heat Pipe Design and Heat Loss Analysis
Abstract: Abstract: This paper is detailed on the design and heat loss analysis of solar heat pipe. Solar heat pipe is thermal device which use to transfer abundant amount of solar energy to working fluid through very smaller cross section area. Solar heat pipe server so many applications in engineering, i.e., water heating system, aerospace application, refrigeration and air conditioning and process industries. The design of heat tube includes finding diameter …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 24–28 Read article
-
Design of a Microstrip Patch Antenna with an Array of Circular SRR Using Left-Handed Metamaterial
Abstract: In this paper, the design of a patch antenna with a metamaterial composed of circular SRR is proposed. The proposed antenna design is fabricated on FR4 substrate and the experimental results obtained are in good agreement with the simulated results. By using the circular SRR structure the return loss of the conventional patch antenna has been improved from -11.5dB to -18.5dB. influence of metamaterial designed on another layer characteristics of …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 24–28 Read article
-
Enhanced Heat Transfer in Double Pipe Heat Exchanger with Circular Fins Using Copper Nanofluid and Twisted Tape Inserts: A Computational Study
Abstract: The enhancement of convective heat transfer in a double-pipe heat exchanger utilizing circular finned twisted tape inserts and helical screw-tapes with centre rods, in conjunction with copper oxide nanofluid as the heat transfer medium was studied in this project. Computational Fluid Dynamics (CFD) simulations were conducted across Reynolds numbers ranging from 500 to 5000 to analyse heat transfer characteristics. The investigation focuses on Nusselt number improvement and friction factor analysis …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 11–22 Read article
-
A Review on Chiral Metamaterials and its Applications in Antennas
Abstract: AbstractThis paper presents a review of the chiral metamaterials (CMM) and their different specific properties like circular dichroism, negative refractive index, and giant optical activity. The physical properties of metàmaterials circular dichroism and the method of retrieval of effective parameters of the CMM are discussed in detail. The various classes of the chiral metamaterial and their results of the simulation are presented. The study shows that the chiral metamaterials have …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 5–16 Read article
-
Experimental Analysis of Rectangular and Circular Microstrip Patch Antenna with Superstrates
Abstract: This paper focusing on the experimental analysis of rectangular and circular microstrip patchantennas with and without radome (superstrate). The proposed antennas were designed at2.4GHz, using HFSS simulation software and fabricated on Arlon DiClad 880 substratewhose dielectric constant is 2.2, loss tangent is 0.0009 and thickness of the substrate is1.6mm. Placing different dielectric constant of the superstrates above the patch antennasperformance characteristics have been studied of both antennas on the basis …
Published in Recent Trends in Electronics Communication Systems · Vol. 7, Issue 3, 2020 · pp. 34–45 Read article
-
Reimagining Solid Waste Management in India: A case of Circular approach in C&D Waste Management
Abstract: Construction and demolition (C&D) waste, which accounts for an estimated 150–500 MT yearly and about 10–20% of the nation's total municipal solid waste (MSW) generation, is a significant management challenge for India. Accelerated urbanization, population increase, infrastructural expansion, and urban redevelopment initiatives are the main causes of this quickly expanding waste stream. Much of this waste is disposed of through uncontrolled dumping, encroachment on low-lying areas, and overcrowded landfills in …
Published in Journal of Construction Engineering, Technology & Management · Vol. 16, Issue 1, 2026 · pp. 1–10 Read article
-
Bandwidth and Return Loss Enhancement in Patch Antenna by Meta Material using at 2.62 GHz
Abstract: In this work, a rectangular micro strip patch antenna (RMPA) loaded with “Symmetric square Shapes Four Segments with circular rings structure” metamaterial structure is designed at a height 3.2 mm from ground plane by using CST-MWS software. The resonance frequency of the designed antenna is 2.62 GHz. The 10 dB impedance bandwidth of proposed antenna is increased up to 78.3 MHz. The return loss of the proposed antenna reduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 33–37 Read article
-
A Circular Slot Loaded H-Shaped Printed Microstrip Patch Antenna for Lower Band 5G Applications
Abstract: Abstract: A circular slot loaded H-Shape patch antenna is introduced in this paper. A circular slot loaded H-Shape patch antenna is fed with coplanar wave guide (CPW) is discussed which is applicable for lower band 5G applications. The radiation pattern is omni-directional which is very near to H-plane. The area of ground plane is 80×101×1.5 mm3 with substrate material having dielectric constant 2.2 and loss tangent 0.002 is used. The …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 1, 2019 · pp. 9–14 Read article
-
Design of a Multiband Antenna with Rectangular and Circular Slots for 5G Mobile Technology
Abstract: AbstractThis paper presents a microstrip patch antenna for 5G mobile communication. Requests for mobile communication arise because of rapid growth in mobile users. So, users need more features like high data rate, good communication and reduced traffic on their mobile phones. These requirements can be met using 5G technology. 5G technology offers very high bandwidth, reduced latency, broadband spectrum, improved QoS and a better capacity. 5G operates from 24 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 30–34 Read article
-
Emerging Trends in Fruit and Vegetable Science: Advances in Cultivation, Postharvest Management, and Value Addition
Abstract: Fruit and vegetable industries are undergoing a radical restructuring as a result of technological development, sustained focus on sustainable development, and rising customer preferences. This review focuses on the latest changes and developments in cultivation, postharvest, value-addition, and management in the global landscape of horticulture. With a global cultivation of 367.72 million tons and a combined market value of greater than 800 billion USD, the sector grapples with significant challenges; …
Published in International Journal of Trends in Horticulture · Vol. 3, Issue 1, 2026 · pp. 42–55 Read article
-
Water Loss Management using EPANET
Abstract: Human beings need water in every aspects of life. Universally, numerous nations are wrestling with the problem of expanding water interest and reducing water assets. This makes it basic to utilize accessible water productively and to lessen water misfortunes. But the water suppliers around the world are facing the water loss management issue. Keeping that in mind, development of sustainable water loss management system is also very much necessary. This …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 64–69 Read article