Search
59 articles for “lateral stability”
-
Geotechnical Assessment and Stabilisation of Lateritic Soils in Tarkwa Using Rice Husk Ash for Road Construction Purpose
Abstract: The cost effectiveness of upgrading gravel roads to a sealed standard has challenged road authorities to make optimum use of naturally occurring materials such as laterites as sub-base and base materials. Untreated laterites have presented problems such as pavement swelling and depression in road construction. This research seeks to assess and stabilise the geotechnical properties of some lateritic soils in Tarkwa using Rice Husk Ash for road construction purposes. Lateritic …
Published in Journal of Construction Engineering, Technology & Management · Vol. 9, Issue 1, 2019 · pp. 6–16 Read article
-
Safety of Foundation of Building
Abstract: The design of a building's foundation requires careful consideration of the load intensity applied from the structure above. To ensure stability and safety, the foundation depth must be sufficient to support the loads effectively. For residential buildings, where the loads are relatively lower, a foundation base size of 2.5 × 2.5 meters or 3 × 3 meters is typically adequate. In contrast, for structures with significantly higher loads, such as …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 51–60 Read article
-
Investigation of Rock Dust Suitability as Improvement Material of Subgrade and Sub-base Laterite Material of Elerinjare, Kwara State, Nigeria, in Pavement Construction
Abstract: The current study involves the improvement of laterite soil by addition of granite dust. The laterite and dust used for the study were collected at Elerinjare town, Ilorin. The analyses were done in a laboratory. The tests are compaction test, specific gravity, California bearing ratio (CBR) (soaked and unsoaked), Atterberg's limit, Sieve analysis, and bulk density. In this investigation, an attempt was made to stabilize lateritic soil using quarry dust …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 2, 2023 · pp. 41–57 Read article
-
Analysis of Rear Suspension Geometry of an ATV
Abstract: This research presents the design and optimization of a rear suspension system specifically developed for an All-Terrain Vehicle (ATV), with the primary goal of enhancing ride quality, handling, and overall dynamic performance across diverse terrains. A key objective is to improve damping characteristics while minimizing unwanted changes in track width and wheelbase during suspension articulation. The study carefully examines critical suspension parameters, including camber angle, toe angle, and wheel travel, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 275–286 Read article
-
Evaluate Variations of Deflections of Fixed Headed Pile from Non-Linear Load - Deflection Curve under Lateral Loading
Abstract: Lateral stability is the vital issue when the pile stands in several soft clay either sand layers. In reality, structure and soil both are show non-linear behaviors. Proper evaluation of non-linear behavior has not so essay in theory. However, slight non-linear effects are included in pile deflection from load-deflection curve of pressuremeter test in laboratory. Pressuremeter modulus is influenced deflection of fixed headed piles. Predicting the variations of non-linear load …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 1, 2022 · pp. 45–52 Read article
-
Comparison of Lateral and Medial Plate Fixations of Talar Neck Fracture: A 3D-Finite Element Analysis
Abstract: Background: Talar neck fractures are rare, but challenging injuries, because the bone has unique anatomy, and its blood supply makes it difficult to stabilize the fracture and is likely to cause posttraumatic or postoperative complications. Thanks to development of appropriately sized plates, outcomes of plate fixation of talar neck fractures have been improved compared with screw fixation. Although some studies have demonstrated no difference between screw only fixation and screw-plate …
Published in Research and Reviews : Journal of Surgery · Vol. 12, Issue 1, 2023 · pp. 6–15 Read article
-
INFLUENCE OF ASPECT RATIO, GEOMETRIC CONFIGRATION AND CONTINUTY ON SHEAR WALL PERFORMANCE
Abstract: This study investigates the dynamic behavior of shear walls in high-rise buildings, focusing on the impact of varying parameters like aspect ratio, geometry, and continuous-discontinuous structures. By accurately identifying and quantifying various loads and conducting comprehensive structural analysis. The high-rise complex features reinforced concrete shear walls designed to resist lateral forces, ensuring safety and stability.This topic is chosen because the dynamic behavior of shear walls in high-rise buildings is critical …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 26–40 Read article
-
The Importance of Safety Engineering in the Design and Assessment of Foundations
Abstract: In safety engineering, ensuring the stability of structures under lateral loads is a critical aspect of foundation design. Lateral forces, such as wind, seismic activity, or other environmental pressures, exert overturning moments on columns, which must be carefully managed to prevent structural failure. To maintain stability, the overturning moment at the foundation base, generated by these lateral loads, must always be less than the restoring moment produced by the soil's …
Published in Journal of Industrial Safety Engineering · Vol. 11, Issue 3, 2024 · pp. 24–29 Read article
-
An Exploratory Study on the Application of Locust Bean Pod Extract as a Natural Binder in the Manufacture of Laterite Blocks for Affordable Housing Construction
Abstract: This study investigates the potential application of locust bean pod extract as an alternative binding material in the production of laterite blocks for local building construction. It also examines the availability and distribution of locust bean pod resources across Nigeria and other parts of Africa. Locust bean pods are typically treated as agricultural waste and discarded after the seeds are removed, creating an opportunity to convert this underutilized by-product into …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 36–45 Read article
-
INVESTIGATING THE GEOTECHNICAL PROPERTIES OF A LATERITIC SOIL AS A SUB-GRADE MATERIAL FOR ROAD CONSTRUCTION –USING COCONUT HUSK ASH
Abstract: Waste management world-wide plays a major role in socio-economic development over the years. The increase in population over the years has contributed to the rate at which wastes are generated. One major waste generated in Ghana is coconut shell waste. Out of the world producing of coconut, Ghana is ranked 16th. The management of these agricultural waste has become a vital challenge to the development to the Ghanaian economy and …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 1, 2020 · pp. 37–46 Read article
-
Stability and Analysis of Retaining Wall of Bank Areas of the Ganga River
Abstract: Retaining walls are used from historic times to prevent the outflow of river and create havoc in the cities. The most important function of a retaining wall is to prevent entering the water in cities by giving higher length than the flood level and different styles of wall are used to secure town from high water level. Finite element technique is used to numerically model the wall and predict its …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 2, 2015 · pp. 15–19 Read article
-
Analysis of Communication Tower under Wind Load
Abstract: With the rapid and widespread expansion of long distance broadcasting and communication in last two decades, the structural engineers have been faced with the problem of support of antennas at great heights, which is necessary to broadcast signals over long distance. In addition, the field of power transmission also requires the high tension conductors to be installed at reasonable heights. The present study focus on analysis of communication towers for …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 12–19 Read article
-
Seismic Analysis of Symmetrical and Unsymmetrical Multistory Building with Shear Wall and Hybrid Shear Wall
Abstract: Shear walls are structural systems which provide stability to structures from lateral loads like wind, seismic load. Shear walls are added to the building interior to provide more strength and stiffness to the building when the exterior walls cannot provide enough strength and stiffness. It is necessary to provide these shear walls when the tolerable span width ratio for the floor or roof diaphragm is exceeded. Shear walls are mainly …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 32–35 Read article
-
Effect of pH on Shear Strength Behavior of Granular Soil
Abstract: In this research, the performances of pH value on shear strength behavior of granular soil have been studied. The shear strength of soil is an important term in most of the foundation engineering problems such as the bearing capacity of shallow foundation, slope stability of dam/embankment and lateral earth pressure on retaining walls. A series of direct shear tests were conducted on two types of dry granular soils (taken from …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 8–11 Read article
-
Comparative Analysis of Sustainable Materials in Road Construction: A Review
Abstract: The immediate need for sustainable infrastructure has driven research into new materials in road construction with the goal of reducing environmental degradation and enhancing resource efficiency. This review is a comparative analysis of four innovative technologies involving industrial and natural waste products: recycled aggregates from construction and demolition (C&D) waste, feldspar powder from lithium mining, stabilized dam sediments using eucalyptus ash, and calcium carbide residue (CCR) blended with dredged sludge. …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 93–98 Read article
-
Evaluation of Shear Walls and Bracings in Irregular Buildings Under Seismic Load
Abstract: The structural integrity and stability of irregular buildings under lateral forces such as wind and seismic loads pose significant challenges in modern construction practices. Irregularities in a building & geometry and mass distribution can lead to uneven force distribution, making the structure more vulnerable to lateral displacement and potential failure. To enhance the resilience of such structures, shear walls and bracing systems are commonly employed to improve lateral load resistance. …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 22–28 Read article
-
Utilization of Egg Yolk as A Non-Toxic Emulsifier in Environmentally Friendly Invert Emulsion Drilling Mud
Abstract: Vegetable oil such as Jatropha has been shown to be a comparable alternative to diesel and mineral oils for environmentally friendly oil based drilling mud. However compatibility of the vegetable oils with the usual chemical additives is still a major challenge that calls for compatible and non-toxic substitutes. This study examined the suitability of hen egg yolk as a non-toxic emulsifier in invert emulsion drilling mud using vegetable oil continuous …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 41–49 Read article
-
Obtaining Balanced Occlusion with Monoplane Teeth Using Balancing Ramp- A Case Report
Abstract: Lateral or tipping forces produce unfavorable forces affecting denture stability and have ill effect on structures comprising the denture foundation area. Denture occlusion differs from natural organic occlusion in order to compensate for the lack of retention, stability and support when compared with natural dentition. Bilateral balance occlusion decreases the transmission of lateral tipping forces. Monoplane occlusion further attempts to decrease the tipping forces by reducing the effect of incline …
Published in Research and Reviews: A Journal of Dentistry · Vol. 8, Issue 1, 2017 · pp. 27–29 Read article
-
Optimization of RCC Building Frames Using Bracing and Without Bracing with Various Position of Shear Wall
Abstract: This review paper aims to analyze the optimization of reinforced cement concrete (RCC) building frames. In particular, it sets out to analyze the structural performance of frames that have not been braced, and frames which have been braced, along with the different shear wall configurations. RCC frames (as the name suggests) are key elements of modern construction because they offer strength combined with flexibility. In addition, structural elements such as …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 34–44 Read article
-
Stabilization of Reinforced Earth Wall Backfill Using Steel Slag and Recycled PET Fiber: A Composite Material Approach
Abstract: Reinforced Earth (RE) walls are widely used in infrastructure due to their structural efficiency and ease of construction. However, they typically require high-quality granular backfill, which may not be readily available or cost-effective in many regions. This study investigates the potential of utilizing locally available sandy clay soil stabilized with industrial and plastic waste materials specifically 20% steel slag and 0.75% shredded polyethylene terephthalate (PET) fibers, as an alternative backfill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 110–127 Read article