Search
178 articles for “hybrid reinforcements”
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Recent Advancements and Layering Techniques in Nanoparticle-Reinforced Hybrid Composites: A Comprehensive Analysis
Abstract: This review examines the advancements in nanoparticle-reinforced fiber composites, focusing on natural fibers, synthetic fibers, hybrid composites, and fiber metal laminates (FMLs). Nanoparticles such as SiO₂, TiO₂, Al₂O₃, and graphene, introduced at 0.5–3% volume, have significantly enhanced mechanical, thermal, and wear properties. Comparative studies reveal that hybrid composites reinforced with 1–2% nanoparticles show a 20-30% increase in tensile strength and a 15-25% improvement in thermal stability compared to non-reinforced composites. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 83–89 Read article
-
Production of Injection Moulded Natural Fiber Reinforced Hybrid Composites and Assessment of Hybridization’s Effect on Mechanical Properties
Abstract: Over the past two decades, rising environmental awareness, public concern over waste, and stricter government regulations have encouraged companies to reduce their reliance on petroleum-based fuels and products. Consequently, there is a clear need to find sustainable, eco-friendly substitutes for the materials currently in use. This shift has renewed attention on renewable resources and sparked wider interest in advanced composites and green materials research. With this in mind, the present …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 246–271 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Investigation of Mechanical Properties of Banana, Linen and Their Hybrid Reinforced Composite Laminates in Adverse Condition and Analyze Using ML
Abstract: This research investigates the mechanical performance of composite laminates reinforced with banana and linen fibers, focusing on both individual and hybrid fiber combinations. The primary objective is to assess how these natural fiber composites behave under extreme environmental conditions, particularly high humidity and fluctuating temperatures, which are common in aerospace and automotive applications.Key mechanical properties—tensile strength, flexural strength, and impact resistance—are experimentally evaluated to assess the performance and long-term reliability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 25–31 Read article
-
Exploration of Mechanical Characteristics and Microstructural Analysis of Copper Matrix Composites with Hybrid Reinforcements via Muffle Furnace Sintering
Abstract: Metal Matrix Composites (MMCs) have drawn a lot of interest in the area of innovative materials because of how widely they may be used. Due to their extraordinary qualities, such as high thermal conductivity, higher temperature endurance, improved corrosion resistance, and great weldability, copper matrix composites stand out among them. These qualities make them desirable and promising materials for uses including heat exchangers, automotive parts, and electrical components. In this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 119–126 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Influence of Hybrid Fiber Reinforcement on the Interfacial Bonding and Fracture Toughness of Epoxy-Based Polymer Composites Under Cyclic Loading
Abstract: This study investigates the influence of hybrid fiber reinforcement on the interfacial bonding and fracture toughness of epoxy-based polymer composites under cyclic loading. Carbon, glass, and aramid fibers, both individually and in hybrid combinations, were incorporated into the epoxy matrix to evaluate their thermal, mechanical, and fatigue-resistant properties. Thermal characterization revealed distinct material behaviors, with carbon fibers exhibiting superior thermal conductivity, while glass and aramid fibers provided enhanced thermal stability. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 799–824 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Performance Evaluation of High-Performance Fiber Reinforced Concrete Incorporating Fly Ash, Coir Husk Ash, and Hybrid Fibers
Abstract: High-Performance Fiber-Reinforced Concrete (HPFRC) is an advanced composite material designed to improve the mechanical properties and durability of conventional concrete. This study investigates the effects of fly ash (FA), coir pith ash (CPA), and various fiber reinforcements (polypropylene, coir, and kenaf) on the compressive strength of HPFRC. The research evaluates the influence of natural admixtures, single fiber additions, and hybrid fiber combinations to optimize mix proportions for enhanced structural performance. …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 10–15 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Mechanical Characterization of Al6061 Hybrid Composites Reinforced with Boron Carbide and Fly Ash via Stir Casting
Abstract: The growing demand for lightweight, cost-effective, and high-performance materials in structural and automotive sectors has accelerated the development of hybrid metal matrix composites (HMMCs). This study investigates Al6061 alloy as the matrix material, reinforced with varying weight fractions of boron carbide (B₄C), a high-hardness ceramic, and fly ash, an economical industrial byproduct, to assess their synergistic effects on mechanical properties. Hybrid composites were synthesized using the stir casting technique to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1711–1719 Read article
-
Tensile and Microstructural Behaviour of Friction Stir Welded AL7050 Hybrid Composites Reinforced with Multani Mitti and Cow Dung Ash
Abstract: The study examines Al7050 aluminum alloy composites made by stir casting and bonded by friction stir welding (FSW), supplemented with environmentally friendly Multani Mitti (MM) and cow dung ash (CDA). The study assesses the effects of different hybrid reinforcement contents (0–8 vol%) on the microstructural properties, hardness, and tensile behavior of the base alloy and its FSW joints. Tensile testing reveals an initial decline at 2% reinforcement but a notable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 78–89 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article
-
Experimental Evaluations of the Tensile and Impact Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers
Abstract: In marine engineering design, polymeric composites reinforced with natural fibers are frequently used. Through hybridization, natural fiber plastic composites' mechanical properties can be improved. Assessing the performance of recycled newspaper fiber (rNF) and rNF/glass fiber (GF) hybrid polypropylene composites is the aim of the current experiment. Using maleic anhydride (MA) as a coupling agent, the effects of GF loading on the impact strength and tensile behavior of composite materials with …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 1, 2025 · pp. 30–39 Read article
-
Evaluation of Fly Ash/ZrO2 Reinforced AZ91E Hybrid Composites Based on Wear and Friction Characteristics
Abstract: In the current study the compo-casting Al alloy MMCs' wear resistance was examined under a variety of abrasive circumstances, including coefficient friction, wear rate and it’s sliding distance. The AZ91E matrix composite was made by the liquid metallurgy process and reinforced with aluminum plated zirconium dioxide (ZrO2) particles. Designers examined the characteristics of matrix alloys along with created composites. friction and wear from dry sliding experiments had been performed on …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 324–338 Read article
-
Mechanical Property Assessment of Hybrid Fiber Reinforced Composites Through Experimental Research
Abstract: Natural fibre reinforced composites are gradually taking the place of synthetic fibre composites due to its inexpensive cost, low density, and ease of supply. Furthermore, the addition of some waste materials to composites has remarkable properties that are attracting interest from a wide range of technical domains. Fibre reinforced with glass, carbon, and jute were used to generate hybrid composites. As a filler, different amounts of eggshell powder were mixed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 244–251 Read article
-
Evaluation of Mechanical Properties of Terminalia Chebula and Teak Wood Sawdust Reinforced Polymer Hybrid Composites
Abstract: This study examines the mechanical characteristics of polymer hybrid composites augmented with sawdust from teak wood and Terminalia chebula (Kadukkai). To examine their effects on mechanical performance, the composites were made with different percentages of biofiller (10%, 20%, 30%, 40%, and 50%) while keeping the proportions of the two reinforcements same. Tensile, flexural, and impact tests were performed to assess their strength properties. The findings showed that flexural strength varied …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 469–476 Read article