Search
37 articles for “flexural stress”
-
Effect of Span, Load Intensity, and Beam Geometry on Stress and Deflection Behavior of RCC Beams
Abstract: This study investigates the influence of variations in beam geometry, span, load intensity, and permissible stresses on the structural behavior of reinforced concrete beams. Using classical bending and shear stress formulations, the effects of a 20% increase in key parameters were analytically evaluated. Results indicate that a 20% increase in beam span leads to a proportional 20% increase in beam depth, whereas a 20% increase in beam width or permissible …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 1, 2026 · pp. 9–22 Read article
-
Development and Evaluation of Hybrid Natural Fiber Composites
Abstract: Natural fiber based polymer composites are becoming more common because they are cheap, sustainable, and operate effectively across mechanical and environmental settings. Natural fibers (NFs) like bamboo and roselle are being used to strengthen polymer composites. They are being used in textiles, medical equipment construction, and car making. People are becoming more interested in these fibers because of the unique properties. Bamboo fiber is an effective option for reinforcement in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 908–915 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Development of Robot Arm Fingers with Polymer Soft Materials
Abstract: Lightweight soft material applications have attracted attention to Basalt Fiber Reinforced Polymer (BFRP) laminates because of their impressive mechanical characteristics. The impact response and stress-strain behavior of epoxy resin laminates armored with basalt fiber and banana fiber are investigated during this project using computational and experimental approaches. The hand lay-up method was employed to create laminates with a thickness of 3 mm, dimensions of 300x300 mm², and a layout of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 432–439 Read article
-
Initiation of Distress in Asphalt Concrete After Practicing Moisture Damage
Abstract: The moisture damage of asphalt concrete is considered as major type of distress in heavy rainfall environment. In this work, the decline in the initial flexural stiffness of asphalt concrete was monitored after practicing the moisture damage process. The variations were analyzed relative to the control mixture. Asphalt concrete mixtures were created in the laboratory with the optimal binder content. Extra mixtures were also prepared with ±0.5% variation of binder …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 7–13 Read article
-
Detecting the Failure Stages in Asphalt Concrete Through the Fatigue Life
Abstract: The signs of failure initiation in asphalt concrete through its service life may appear as cracking, rutting, or other types of distress after practicing dynamic stresses from vehicular loading. This work is concerned with detecting the failure initiation in asphalt concrete in the laboratory, and the role of binder content and constant strain level through a comprehensive testing program. Asphalt concrete mixtures were formulated with the optimal binder content, as …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 1, 2024 · pp. 21–27 Read article
-
Development and Assessment of Mechanical Characteristics in Sisal-Glass Fiber Reinforced Epoxy Composites
Abstract: In many different fields, including tensile strength, reduced thermal expansion, and an amazing strength-to-weight ratio, fiber-reinforced polymer composites are gradually replacing conventional materials. This work mostly addresses the development and evaluation of the mechanical characteristics of epoxy composites improved with glass fibers and sisal. Among the benefits are biodegradability, lower weight, and more specific strength. Sisal polymer composites are included under natural fiber composites. Including sisal strands into glass fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 708–719 Read article
-
Mechanical Analysis and Advanced Manufacturing of Eco-Friendly Groundnut Shell Powder Reinforced Epoxy Composites
Abstract: Polymer composites reinforced with natural materials are gaining significant attention because of their eco-friendly nature, cost-effectiveness, and favorable mechanical properties. This research explores the creation and mechanical analysis of epoxy composites strengthened with groundnut shell powder (GSP), exploring both untreated and benzoyl chloride-treated GSP variations. The research emphasizes utilizing agricultural waste material while achieving enhanced mechanical properties through surface modification and advanced fabrication techniques. The composites were manufactured using the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 174–185 Read article
-
Investigating Flexural Behavior in Cyclic Loading of Fly Ash-Based Green Concrete
Abstract: The construction industry is increasingly embracing sustainable materials, and geopolymer concrete (GPC) has emerged as a promising eco-friendly alternative to Ordinary Portland Cement (OPC). Derived from industrial by-products such as fly ash, GPC offers significant environmental advantages by reducing greenhouse gas emissions associated with conventional cement production. This study explores the monotonic and cyclic performance of fly ash-based GPC, with a focus on its mechanical and structural behavior. Key properties, …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 1–5 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Cubic B-splines for Isogeometric Analysis of Laminated Composite Plates Subjected to Hygroscopic Loading Using Classical Laminated Plate Theory
Abstract: Composite laminates are inevitably used in several engineering structures due to their high strength and stiffness to weight ratio. The laminates are subjected to change in moisture content and the flexural behavior leads to change in the strength. Presence of moisutre may induce residual stresses and strains. Isogeometric analysis is a well-proven method to perform analysis of laminated composite plates. The main focus of this study is to apply isogeometric …
Published in Journal of Polymer & Composites Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Hygrothermal Analysis of Functionally Graded Material Plates
Abstract: This study introduces a novel higher-order shear deformation theory, tailored to accommodate various loading conditions experienced by laminated plates. The theory is specifically designed for the hygrothermal analysis of functionally graded plates. Three homogenization methods are used to calculate the Young's Modulus that is Power law distribution, The exponential distribution and The Mori-Tanaka scheme. Navier's solution scheme is used for flexural analysis of Functionally graded plates simply supported at all …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 44–62 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article