Search
33 articles for “flexural modulus”
-
Production of Injection Moulded Natural Fiber Reinforced Hybrid Composites and Assessment of Hybridization’s Effect on Mechanical Properties
Abstract: Over the past two decades, rising environmental awareness, public concern over waste, and stricter government regulations have encouraged companies to reduce their reliance on petroleum-based fuels and products. Consequently, there is a clear need to find sustainable, eco-friendly substitutes for the materials currently in use. This shift has renewed attention on renewable resources and sparked wider interest in advanced composites and green materials research. With this in mind, the present …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 246–271 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Comprehensive Study on the Mechanical And Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement technique. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Prediction of Mechanical Properties for Advanced Engineering Applications utilizing Polymer Composite Materials by Machine Learning
Abstract: Polymer composites show great promise as engineering materials because of their mechanical performance, resistance to corrosion, lightweight nature, and adaptability in design. Aerospace, automotive, biomedical, maritime, and civil engineers all rely on mechanical property prediction to cut down on trial expenses, expedite product development, and optimize material selection. Speedy design optimization is not possible using traditional numerical and experimental methods due to the high costs associated with material characterisation, computational …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Investigating Flexural Behavior in Cyclic Loading of Fly Ash-Based Green Concrete
Abstract: The construction industry is increasingly embracing sustainable materials, and geopolymer concrete (GPC) has emerged as a promising eco-friendly alternative to Ordinary Portland Cement (OPC). Derived from industrial by-products such as fly ash, GPC offers significant environmental advantages by reducing greenhouse gas emissions associated with conventional cement production. This study explores the monotonic and cyclic performance of fly ash-based GPC, with a focus on its mechanical and structural behavior. Key properties, …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 1–5 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Enhancing Concrete Performance With GGBFS: An Analysis of Strength Characteristics at Various Replacement Levels
Abstract: This study investigates the effect of ground-granulated blast furnace slag (GGBFS) as a partial replacement for cement on the mechanical properties of concrete. The primary objective was to assess the compressive, flexural, and split tensile strengths, along with the modulus of elasticity, at different replacement levels of cement with GGBFS and at distinct curing ages of 7, 28, and 56 days. Concrete mixes were prepared by replacing cement with GGBFS …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 121–138 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Investigation on mechanical performance of 3D printed PLA-Kraft Lignin composites
Abstract: Bio-based polymer composites are becoming more popular due to the growing need for sustainable and biodegradable materials in additive manufacturing. PLA-kraft lignin composites were created and their mechanical performance in fused deposition modeling (FDM) applications was assessed in this work. Polylactic acid (PLA) was mixed with Kraft lignin, a sustainable by-product of the paper industry, at weight percentages of 0%, 1%, 3%, 5%, and 7%. Melt blending was utilized to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1002–1015 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Enhancement of Mechanical Properties in Hemp Fiber-Reinforced Epoxy Composites Using Graphene Nanoplatelets
Abstract: This study investigates how incorporating graphene nanoplatelets (GNPs) influences the mechanical performance of hemp fiber–reinforced epoxy composites. Hemp fibers were chemically treated by alkali treatment to improve fiber–matrix adhesion owing to their high specific strength, stiffness, renewability, and environmental friendliness. Graphene nanoplatelets were dispersed in acetone by probe sonication and added to acetone epoxy matrix at a concentration of 0.5 wt% and 1.0 wt%, respectively. Composite laminates were prepared by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 98–109 Read article