Search
81 articles for “fin thickness”
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article
-
Optimizing Fin Parameters to Enhance Passive Heat Dissipation in Photovoltaic Panels
Abstract: This study explores passive cooling techniques to enhance the thermal management of photovoltaic (PV) modules, which is crucial for maintaining efficiency. A computational fluid dynamics (CFD) model, using ANSYS Fluent, was developed to evaluate three fin shapes: rectangular, trapezoidal, and triangular, attached to the back of PV modules. The study varied parameters such as fin count, thickness, and length to determine optimal configurations for cooling. Among the designs, triangular fins …
Published in International Journal of Radio Frequency Innovations · Vol. 2, Issue 2, 2024 · pp. 25–35 Read article
-
Optimizing Heat Transfer Performance in CO2 Finned-Tube Gas Coolers: A Comparative CFD Study of Design Variations
Abstract: Computational fluid dynamics (CFD) simulations and mathematical analysis are used in this study to examine the heat transfer efficiency of CO2 fined tube gas coolers. To maximize heat transfer efficiency, CFD simulations were carried out on a variety of gas cooler designs with variable fin geometry, including offset strip fins, using the ANSYS Fluent program. Under the baseline design, there was a finned tube cooler measuring 610 mm in length, …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 3, 2024 · pp. 1–13 Read article
-
Validation of Watershed Management Plan at Taradgaon Region Using Geophysical & GIS Techniques
Abstract: Water is an essential requirement for the survival of the living organisms on earth planet. Though it seems to be available in sufficient amount, unfortunately its distribution in space and time is highly scattered. Therefore, water resources management practices should be identified using the spatial data set collected through remote sensing and other tools for its optimistic usage and exploration. This study investigates the utilization of Geophysical and GIS Techniques …
Published in Journal of Water Resource Engineering and Management · Vol. 11, Issue 1, 2024 · pp. 1–7 Read article
-
Thermal Stability and Sound Absorption Behaviour of Sisal–Luffa Hybrid Epoxy Composites for Automotive Interior Applications
Abstract: Natural fiber–reinforced composites are gaining popularity as substitutes for synthetic fiber composites because of their environmental and sustainability advantages. Their adoption is steadily increasing across various industries. In automotive interior applications, these materials must exhibit strong thermal stability and efficient sound absorption to meet performance requirements. In this experiment, composites were made by mixing sisal and luffa fibers with epoxy resin. The hand lay-up method was used for fabrication. Two …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 144–157 Read article
-
Semiconducting Materials for Emerging Electronics and Technological Applications
Abstract: Semiconducting materials are important for emerging electronic and photovoltaic technologies because their structural, optical and electrical properties can be tailored for specific device applications. In this study, a TiO₂-based composite photoanode is considered as a polymer-assisted semiconducting thin-film system in which inorganic TiO₂ nanoparticles are processed with organic film-forming components to produce a porous layer for dye-sensitised solar cell application. Nanocrystalline TiO₂ nanoparticles were synthesised from titanium isopropoxide using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 36–50 Read article
-
Optimization of a new Bebq2/BCP-based OLED structure for optimum performance
Abstract: Opto-electronic devices exhibit highly nonlinear current–voltage (I–V) characteristics that significantly affect charge injection, transport, and recombination, evaluating their performance remains a difficult challenge. Device optimization is a key research goal in organic light-emitting diodes (OLEDs), as the thickness and arrangement of individual functional layers greatly influence electrical and optical responses. For a suggested Bebq2/BCP-based OLED structure, this work methodically examines the movement of charge carriers, their transport behavior, and the …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 2, 2026 Read article
-
Tailoring the Compressive Behavior of Tetra-Chiral Auxetic Structures through FDM Process Parameters
Abstract: This research evaluates how fused deposition modeling (FDM) fabrication process parameters affect the compressive behavior of tetra-chiral auxetic structures created from Polylactic Acid (PLA). Auxetic materials have a number of useful properties, including reversible deformation and high-energy absorbing capabilities, which are beneficial to creating ultra-lightweight structural, protective, and shock-resistance designs. Among the available auxetic topologies, the tetra-chiral configuration is particularly attractive for engineering use, because its rotation-dominated node–ligament deformation gives …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article
-
CFD Analysis and Optimization of Fin-Enhanced Cooling Systems for Enhanced PV Performance
Abstract: This study examines how the performance of photovoltaic (PV) panels can be improved by means of passive cooling techniques through fin configurations. Computational Fluid Dynamics (CFD) simulation, validated with experimental data, was used to analyse the thermal behaviour of PV modules integrated with different fin shapes, namely rectangular, trapezoidal, and triangular geometries. It was found that trapezoidal fins yield better thermal performance, lowering the panel temperature by more than that …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 1–15 Read article
-
AI-Assisted Optimization of Supersonic Airfoil Shapes Using CFD Coupling
Abstract: This paper presents a novel framework for optimizing supersonic airfoil geometries through integrated artificial intelligence and computational fluid dynamics coupling. Traditional gradient-based optimization methods for high-speed aerodynamic shapes suffer from computational expense and convergence difficulties in non-convex design spaces. The proposed methodology employs a deep neural network surrogate model trained on high-fidelity Reynolds-Averaged Navier-Stokes solutions to approximate aerodynamic performance metrics across the design space. A hybrid particle swarm-genetic algorithm searches …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 1, 2026 Read article
-
Performance analysis of cross-slotted patch antenna for wireless system applications
Abstract: A C-band cross-slotted microstrip patch antenna for ice and frost detection in wireless sensing applications. The antenna configurations with distinct cross-slot geometries are designed to investigate their influence on impedance matching, radiation characteristics, and sensing sensitivity. The antennas are modeled and analyzed using Ansys HFSS, and their dimensions are optimized using standard microstrip antenna design equations. Ice and frost accumulation on the antenna surface is identified through measurable shifts in …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 13, Issue 1, 2026 · pp. 35–50 Read article
-
Effect of 3D Printing Process Parameters on the Tensile Strength of Polylactic Acid (PLA)
Abstract: This study employs the Taguchi approach to systematically analyze and optimize critical Fused Deposition Modeling (FDM) parameters, focusing on their effect on the tensile strength of 3D-printed Polylactic Acid (PLA) components. The study explores three levels of layer thickness (0.15 mm, 0.25 mm, and 0.3 mm), infill densities (25%, 50%, and 75%), and nozzle temperatures (200°C, 205°C, and 210°C) across three infill patterns: Triangular, Gyroid, and Zig-zag. A total of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 128–140 Read article
-
Rotational Speed Influence on Weld Temperature in Friction Stir Lap Joint of Aluminium Alloy 6061 Using Numerical Simulation
Abstract: The weld quality assessment in friction stir welding depends on the choice of suitable weld parameters. Rotational speed is one such parameter. The study utilizes a computational fluid dynamics model to examine the influence of various rotational on the workpiece and weld interface temperature. The workpiece selected for this study is an Aluminium Alloy 6061, while the tool employed is a truncated conical pin tool featuring a conical shoulder in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 235–245 Read article
-
Effect of Sinusoidal and Inverse sinusoidal Load on the Vibration and Buckling Behaviour of Laminated Composite Symmetrical and Unsymmetrical Trapezoidal Panels
Abstract: Using finite element (FE) techniques, this work analyzes the influence of sinusoidal and invers sinusoidal stresses on the buckling behavior of trapezoidal laminated composite panels (also known as trapezoidal laminated composite panels). The discretization of the composite panel is accomplished by the use of an eight-noded iso-parametric plate element, which has five degrees of freedom for each node. Due to the incorporation of Higher Order Shear Deformation Theory (HOSDT) into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 Read article
-
Effect Of Sinusoidal and Inverse Sinusoidal Load on The Vibration and Buckling Behaviour of Laminated Composite Symmetrical and Unsymmetrical Trapezoidal Panels
Abstract: Using finite element (FE) techniques, this work analyzes the influence of sinusoidal and inverse sinusoidal stresses on the buckling behavior of trapezoidal laminated composite panels (also known as trapezoidal laminated composite panels). The discretization of the composite panel is accomplished by the use of an eight-noded iso-parametric plate element, which has five degrees of freedom for each node. Due to the incorporation of Higher Order Shear Deformation Theory (HOSDT) into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 72–84 Read article
-
Safety of Structure
Abstract: The thickness of structural components is a vital factor in ensuring their durability and stability under various load conditions. In this study, the material thickness is first determined through the application of bending equations, which are used to analyze regions where bending forces are most significant. The bending stress generated by external loads is considered to calculate the required thickness to prevent failure under such stresses. Additionally, the effect of …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 1, 2025 · pp. 1–11 Read article
-
Experimental and Numerical Studies on Radial Tensile Strength of Composite Rotor
Abstract: This paper describes the experimental and numerical studies on the radial tensile strength (RTS) of composite rotor. Carbon/epoxy composite rotors were fabricated using a filament winding process and their radial tensile strength was determined by diametric tensile testing of composite C-rings. The radial tensile strength of the composite rotor was measured as ~ 22 MPa and the failure was found to occur circumferentially symmetric about the horizontal plane of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 985–996 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
Performance Analysis of Dual Junction Solar Cell Devices utilizing Subcells of In0.51Ga0.49P and GaAs to Study Key Solar Cell Parameters via TCAD based Simulation
Abstract: In the present work, a multi-junction solar cell was designed to obtain better performance over single-junction solar cells. The proposed structure is composed of different layers of diverse semiconductor materials stacked on each other. Here, an In0.51Ga0.49P/GaAs double-junction solar cell was outlined as having a distinctive composite material (GaAs) as the tunneling junction. To optimize the solar cell's effectiveness, In0.47Ga0.15Al0.37P was used in the window layer and the back-surface field …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 829–837 Read article