Search
30 articles for “fiber-matrix adhesion”
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article
-
Thermal and Microstructural Evaluation of Natural-Glass Fiber Hybrid Composites: Sustainable Alternatives to Synthetic Materials
Abstract: The scope of engineering requirements for composite materials, which mix features from several elements engaged in engineering applications to enable greater performance, cannot be adequately understood in this way. The most recent of these materials are hybrid composites, which combine synthetic and natural fibers, particularly glass fibers, and are anticipated to create new, promising materials in terms of their ties to cost, performance, and consistency. From the perspective of their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1275–1285 Read article
-
Mechanical and Morphological Analysis of Jute/Manila Hemp Hybrid Composites for Enhanced Structural Performance
Abstract: Natural fiber composites are renowned for their lightweight, strength, corrosion resistance, and high strength-to-weight ratio, often surpassing traditional metals. Despite challenges such as poor fiber-matrix adhesion and moisture susceptibility, hybridizing composites present a viable solution by enabling tailored properties for optimal performance. This study investigates hand-lay-up processed natural fiber composites, specifically woven jute/epoxy, non-woven manila hemp/epoxy, and their hybrid variants. Extensive testing was conducted on mechanical properties including hardness, flexural …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 1–11 Read article
-
Mechanical Analysis and Advanced Manufacturing of Eco-Friendly Groundnut Shell Powder Reinforced Epoxy Composites
Abstract: Polymer composites reinforced with natural materials are gaining significant attention because of their eco-friendly nature, cost-effectiveness, and favorable mechanical properties. This research explores the creation and mechanical analysis of epoxy composites strengthened with groundnut shell powder (GSP), exploring both untreated and benzoyl chloride-treated GSP variations. The research emphasizes utilizing agricultural waste material while achieving enhanced mechanical properties through surface modification and advanced fabrication techniques. The composites were manufactured using the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 174–185 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Design and Validation of an Artificial Intelligence-Driven Digital Twin for Real-Time Monitoring and Control in Polymer Composite Manufacturing
Abstract: Polymer Matrix Composites (PMCs) have become indispensable in high-performance sectors such as aerospace and automotive engineering, offering exceptional strength-to-weight ratios that outperform traditional metals in many demanding applications. However, the reliability of manufacturing PMCs via Vacuum-Assisted Resin Transfer Molding (VARTM) is frequently undermined by stochastic process variabilities. Unpredictable fluctuations in thermal history, preform permeability, resin rheology, and ambient conditions often lead to some defects; namely voids, dry spots, and incomplete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 224–233 Read article
-
Fabrication and drilling characterization of Hemp & Grewia-Optiva hybrid composite and comparison with ANN model
Abstract: In recent days the use of natural fibers has increased over synthetic fibers due to various advantages. The alkali treatment for these natural fibers further improves the adhesion between fiber and matrix and greatly enhances the mechanical properties of the composite. The present study involves the fabrication of a hybrid composite using the alkali-treated (5% NaOH concentration) natural fibers – Hemp &Grewia-optiva as reinforcement material and epoxy as a matrix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 138–146 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article
-
Advanced Fiber-Reinforced Polymer Composites: Processing, Nano-Modified Adhesive Technologies, Interfacial Engineering, Durability, and Structural Applications—A Comprehensive Review
Abstract: Fiber reinforced polymer (FRP) composites are considered to be one of the most universal categories of advanced engineering materials owing to their unique properties such as outstanding strength-to-weight ratio, corrosion resistance, fatigue durability, and wide opportunities for design. Innovations in the fields of fiber reinforcement, polymer matrix system, composite manufacturing technologies, and nano-modified adhesives technology have greatly extended the range of applications of this type of materials in aerospace, automotive, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 980–990 Read article
-
Mechanical Property Assessment of Hybrid Composite Laminates Composed of Jute Glass Fibers in Combination with Flax, Hemp, Sisal and Kenaf Fibers Using the Hand Layup Technique
Abstract: The present work compares the properties of various hybrid composite laminates manufactured using the hand layup technique and addresses their production process, based on glass fiber as the exterior layer and natural fibers (flax, hemp, kenaf, jute, and sisal) as interior layers, in an epoxy resin. Five stacking sequences A-GJJJJG, B-GFJJFG, C-GHJJHG, D-GKJJKG, and E-GJSSJG were used to prepare the test specimens. According to ASTM guidelines, experiments were performed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 103–113 Read article
-
Sustainable Development of Carbon–Sisal Reinforced Polyester Composites through Green Nanotechnology
Abstract: This study presents the sustainable development of carbon–sisal fiber reinforced polyester composites enhanced through green nanotechnology for improved mechanical performance and environmental compatibility. The hybrid composites were fabricated using varying fiber ratios - C1 (70% carbon, 30% sisal), C2 (60% carbon, 40% sisal), and C3 (50% carbon, 50% sisal) - with an optimized addition of 1 wt.% nano-silica (SiO2) synthesized via a green sol–gel route. The tensile, flexural, and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1179–1194 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Marine Algal Fiber Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article