Search
40 articles for “epoxy resin characterization”
-
Diglycidyl Ether of Bisphenol A (DGEBA) Based Epoxy Sizing Agent Induces Surface Polarity in Carbon Fibers†
Abstract: Determination of the chemical structure and composition of the sizing agent is a challenge as its concentration is low, varying in the range from ~0.5 wt.% (for polyacrylonitrile, PAN, based carbon fibers) to ~1 wt.% (for pitch-based carbon fibers). Moreover, such a piece of knowledge is vital for designing compatible polymer matrices to prepare CFRPs for diverse applications. As a result, the sizing layer that is coated on the carbon …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 24–34 Read article
-
Polymer Matrix Characterization and Interfacial Engineering in Bamboo/Sisal/Chopped Mat Hybrid Fiber Composites
Abstract: The present investigation focuses on the characterization of polymer matrices and the interfacial behavior of bamboo, sisal, and chopped strand mat (CSM) fiber-reinforced epoxy composites. The work aims to understand how natural fibers influence the curing, thermal, and adhesion properties of hybrid composite systems. Experimental analyses were carried out using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) to evaluate curing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 123–135 Read article
-
Effect of hybridization on mechanical Characteristics of hemp,bamboo and jute reinforced epoxy bio composites
Abstract: In the present study, hemp, jute and bamboo fibres have been reinforced with epoxy resin to develop several bio-composites (hemp/epoxy, jute/epoxy, bamboo/epoxy, hemp/jute/epoxy, hemp, bamboo, epoxy and hemp/jute/bamboo/epoxy). Their mechanical characteristics (impact strength, flexural strength, and tensile strength) have been evaluated by conducting standardized ASTM tests on the fabricated bio-composite specimens. Among these, the hybrid epoxy composite reinforced with hemp, jute, and bamboo fibers has exhibited superior tensile and impact …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 81–91 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Development of Robot Arm Fingers with Polymer Soft Materials
Abstract: Lightweight soft material applications have attracted attention to Basalt Fiber Reinforced Polymer (BFRP) laminates because of their impressive mechanical characteristics. The impact response and stress-strain behavior of epoxy resin laminates armored with basalt fiber and banana fiber are investigated during this project using computational and experimental approaches. The hand lay-up method was employed to create laminates with a thickness of 3 mm, dimensions of 300x300 mm², and a layout of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 432–439 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Thermal and Microstructural Evaluation of Natural-Glass Fiber Hybrid Composites: Sustainable Alternatives to Synthetic Materials
Abstract: The scope of engineering requirements for composite materials, which mix features from several elements engaged in engineering applications to enable greater performance, cannot be adequately understood in this way. The most recent of these materials are hybrid composites, which combine synthetic and natural fibers, particularly glass fibers, and are anticipated to create new, promising materials in terms of their ties to cost, performance, and consistency. From the perspective of their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1275–1285 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Material Characterization Analysis of Fiber Reinforced Composites
Abstract: The study investigates the physical characteristics of PAN carbon fabric/epoxy composite which is a material commonly utilized in aerospace, defense, and automotive sectors. The material has exceptional mechanical properties like high specific strength and hardness. The materials utilized in this experiment are T-300 PAN carbon fabric, LY556 Epoxy resin, and HY5200 hardener to create pre-preg materials. Then the laminate was pre- pregged in a die mold of identical shape matched, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 230–243 Read article
-
Performance Evaluation of Hybrid Polymer Composite Materials for Electromagnetic Interference Shielding in Flexible and Wearable Electronic Devices
Abstract: Wearable electronic devices require novel hybrid polymer composites that offer flexible, lightweight and highly effective EMI shielding characteristics. The development and characterization of flexible polymer composites combining hard magnetic nanoparticles and electrically conductive fillers are explored. The suitability of thermoplastic polyurethane (TPU), polydimethylsiloxane (PDMS) and epoxy resins for use as EMI shielding composite matrices was evaluated in terms of their flexibility, stability and biocompatibility. Hybrid filler systems were developed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 630–648 Read article
-
Investigation of Mechanical Properties of Hollow Bricks Incorporating Aerated Aggregates: A Polymer-Cement Composite Approach
Abstract: The rapid advancement of construction technologies has necessitated the development of lightweight, thermally efficient, and sustainable building materials. Hollow bricks, due to their inherent voids, offer substantial reductions in dead load and enhanced insulation properties. However, their mechanical performance often falls short when compared to conventional solid bricks. To address this limitation, this study explores the synergistic integration of aerated aggregates and polymer-cement composites (PCCs) in hollow brick production. Aerated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 92–105 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Characterization and Fabrication of Particle Board from Banana Fiber and Sawdust as A Hybrid Composite
Abstract: The current global landscape emphasizes the search for eco-friendly and regenerative materials. Utilizing environmentally available fibers in conjunction with polymeric resins through efficient manufacturing processes offers a cost-effective solution with high-quality standards. Polymer matrix composites with fiber reinforcements possess several advantages, including low production costs, ease of fabrication, and improved material properties, making them applicable in a wide range of industrial contexts. This paper emphasizes the creation of Particle boards …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 192–200 Read article
-
Fabrication and Testing of Physical Behavior of Coconut Shell Micro Particulate and Walnut Shell Micro Particulate Reinforced Epoxy Composites
Abstract: Enhancing the physical characteristics of high-performance materials is largely dependent on the reinforcement of polymers by microparticles. The physical behavior of polyester composites containing coconut and walnut shell microparticles was thus investigated in order to create an engineering material for industrial use. Most researchers investigated the flammability test of fiber bio-composites only. There is a possibility that two particular polymers embedded in a thermoset polymer matrix could provide the lowest …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 592–603 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article