Search
99 articles for “energy absorption”
-
Stress based topology optimization of axial tubes under impact to improve energy absorption
Abstract: The present study is aimed at designing a stress constrained topology optimized tube to improve the specific energy absorption (SEA) and reduce the peak crushing force. The research was aimed to develop an axial tube to withstand high impact loads thus improving the crash worthiness of the structure. Crash analysis of a 3D deformable circular tube having different thickness of 0.5 mm, 1 mm, 1.5 mm and 2 mm with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 210–220 Read article
-
Experimental Investigation on Thermal Conductivity and Viscosity of Phase Change Material (NaNOᴣ and KNOᴣ) with Different Concentrations of ZnO Polymer Nanofluids for Solar Energy Absorption
Abstract: When evaluating the effectiveness of solar heat absorption methods or solar thermal energy storage systems (TESS), heat transfer fluid is a crucial element. Thermal conductivity and usable heat obtained for any industrial or immediate power plant efficiency are improved by the distinctive refining of Heat Transfer Fluid (HFT). The phase change material used in this study, known as solar salt is a blend of 60% NaNO3 and 40% KNO3. It …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 25–35 Read article
-
Experimental investigation on impact resistance and energy absorption of multicell thin walled glass fibre reinforced polymer composite
Abstract: The objective of this study is to explore the behaviour of different types GFRP cell structures under dynamic load testing. In this study we have designed, fabricated, tested and analyzed specimens of different configurations (Cylindrical structure – 1 cell, 2 cell and 4 cell) using Glass Fibre Reinforced Polymer (GFRP). GFRP constituents are Glass fibre of 200 GSM with L-12 epoxy and K-6 hardener. Test specimens were manufactured by conventional …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 85–95 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Carbon Fiber Impact Attenuator: A Comprehensive Design and Analysis Approach
Abstract: In the high-stakes world of Formula One competition, accidents are a sad reality. The primary causes of these accidents are violent overtaking, high speeds, and environmental factors. All of these causes result in accidents, such as a car colliding head-on with barricades, two automobiles colliding, a car skidding on a wet track, etc. Driver safety must be improved, and accidents of this nature must be avoided. One such safety elements …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 452–468 Read article
-
Tailoring the Compressive Behavior of Tetra-Chiral Auxetic Structures through FDM Process Parameters
Abstract: This research evaluates how fused deposition modeling (FDM) fabrication process parameters affect the compressive behavior of tetra-chiral auxetic structures created from Polylactic Acid (PLA). Auxetic materials have a number of useful properties, including reversible deformation and high-energy absorbing capabilities, which are beneficial to creating ultra-lightweight structural, protective, and shock-resistance designs. Among the available auxetic topologies, the tetra-chiral configuration is particularly attractive for engineering use, because its rotation-dominated node–ligament deformation gives …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Crystalline and Polymeric Interactions in Multi- layered Bulletproof Glass: A Study of Ballistic Resistance and Structural Integrity
Abstract: Bulletproof glass is engineered to withstand high-impact projectiles, offering a critical line of defense in various industries such as banking, military, and armored vehicles. This study explores the structural composition, energy absorption mechanisms, and performance characteristics of bulletproof glass when exposed to ballistic threats. The glass consists of layered constructions, often involving polycarbonate and adhesive interfaces such as polyvinyl butyral, which enhance its energy absorption and resistance to projectiles. The …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 10–17 Read article
-
Design and Analysis of Honeycomb Rear Door Map Pocket by Application of Finite Element Method
Abstract: In modern automobiles, the door trim plays a vital role in both functionality and occupant safety. It integrates various convenience features such as armrests, power window switches, and map pockets, while also contributing to crash energy absorption during side impacts. In such collisions, the occupant's body typically contacts the door trim, making its design and material selection critical for minimizing injury through controlled deformation and energy dissipation. This research focuses …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 940–951 Read article
-
Design and Ballistic Performance Assessment of Pattern-Optimized Lightweight Composite Armor Using ANSYS Explicit Dynamic and AUTODYN
Abstract: This study investigates the ballistic performance of lightweight composite armor panels designed to defeat 9 mm full-metal-jacket (FMJ) threats using high-fidelity numerical simulations. Four different composite materials were arranged into panels of identical overall dimensions; only the internal segment pattern was varied to explore geometric resistance effects while keeping mass and material type controlled. Ballistic impact simulations were performed using ANSYS Explicit Dynamics and AUTODYN to capture high-strain-rate behavior, local …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 174–190 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Synthesis and Characterization of VO 2+ doped SrMg 2 (PO 4 ) 2 Nanopowder by Solid State Reaction technique suitable for White LED material
Abstract: VO2+ doped SrMg2(PO4)2 nanopowder was synthesized by using solid state reaction (SSR) technique. Various experimental techniques have been performed on prepared sample. XRD analysis has revealed that prepared nanopowder is in monoclinic phase. The average crystallite size, micro strain and dislocation density evaluated and make an analogy with W-H plot method. SEM micrographs shows that agglomerated stone like structure and EDS spectrum shows elemental compositions of synthesized sample. FTIR spectrum …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 95–110 Read article
-
Low Velocity Impact Behaviour of Corrugated Foam Sandwich Panel
Abstract: Composite sandwich structures, renowned for their high flexural stiffness and low weight, are widely used across industries such as aerospace, automotive, and marine. However, their durability can be compromised by impact-related damages, which affect both the core and face sheets. This study explores the performance of corrugated sandwich panels compared to conventional designs under low-velocity impacts. Using a drop weight impact testing machine, panels made from polyurethane foam cores and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 79–99 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal-polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Axial Compression Behavior of Aluminum (Al), Glass/Epoxy (GFRP) and Hybrid Al-GFRP Crash-box: An Experimental and Digital Image Correlation Approach
Abstract: The study aims to understand the axial compression characteristics and fracture of cylindrical Aluminum (Al), Glass/epoxy (GFRP) composite and Hybrid Al-GFRP crash-boxes. The hollow Al tubes are fabricated by rolling and bonding a thin aluminum sheet followed by rivet joints. The GFRP samples are manufactured using the wet-hand layup technique followed by the vacuum bagging method. Hybrid samples are manufactured by covering GFRP tubes with aluminum sheets on the outer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 304–313 Read article