Search
73 articles for “cooling rate”
-
Effect of Mould Cavity Thickness on Cooling Rate of Aluminium with Temperature Dependent Properties
Abstract: Solidification study of aluminium with temperature dependent thermal properties has been conducted. Effect of the mould cavity wall thickness on the cooling rate has been the target in the present work. Casting is earliest metal shaping process and has been used in many industries and households. Solidification during casting is the most crucial event which has been studied by the many researchers because it affects the quality of the casting …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 31–35 Read article
-
Liquid-Cooled Battery Thermal Management System: A Numerical Investigation of Effect of Coolant Path and Flow Rate Optimization
Abstract: Battery thermal management system (BTMS) is crucial for ensuring the safety and performance of battery packs in electric vehicles. Liquid cooling is one of the most effective methods for BTMS, but the choice of coolant, fluid path and its flow rate can affect the heat transfer efficiency and the pressure drop. In this paper, a numerical simulation of a liquid-cooled BTMS using three designs with water as a coolant has …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 11–18 Read article
-
Impact of Mould Material on Microstructure and Mechanical Properties of Aluminium Castings: A Comparative Study with Aluminium Matrix Composites
Abstract: Casting has a wide industrial usage because it allows manufacturing complicated forms even at a comparatively low cost. Issues like transfer of heat through the interface of the mould and the metals, the rate of solidification, and the characteristics of the mould material have a powerful impact on the quality of cast products. This study measures the influence of various mould substances on the mechanical characteristics of aluminium castings. Sand, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 9–18 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Sonochemical Methods to Prepare Composes
Abstract: This purview is to link major and minor chemical reactions. Subjective has various unknown chemical reactivity those have announced by ultrasound. Cavity generation followed by implosive collapse have secreted chemistry to some extent so as pervert to scheme as well. Applicability of ultrasound has studied over chemical stimulus, scrubbing atomizer, crystallization, emulsification, dissolution, dispersion, defoaming, degassing, floatation, homogenization etc. Synthetic catalytic routes has subscriptive issued ultrasonic reverberation to regain some …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 2, 2021 · pp. 1–7 Read article
-
Effect of Post Weld Heat Treatment on Mechanical Properties and Microstructure of P11 Weld: A Review
Abstract: Post weld heat treatment (PWHT) is a process of reducing residual stresses and enhancing material properties of any material after welding. The process depends on many parameters like type of material, thickness of material, PWHT temperature, soaking time, heating and cooling rate, etc. Post weld heat treatment is a process of material that could result detrimental effects on tensile strength, yield strength, impact toughness, hardness, elongation, etc. If the process …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 3, 2017 · pp. 43–47 Read article
-
Effect of PWHT Cycle on Microstructure and Mechanical Properties of 1.25Cr-0.5Mo Weld
Abstract: Post Weld Heat Treatment (PWHT) is a process of reducing residual stresses and enhancing material properties of any material after welding. The process depends on many parameters like type of material, the thickness of material, PWHT temperature, soaking time, heating and cooling rate, etc. The Post Weld Heat Treatment process of material could effect on tensile strength, impact toughness, hardness, microstructure, etc. If the Process of PWHT is performed incorrectly …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 1, 2019 · pp. 7–16 Read article
-
Solidification of Brass Casting in Green Sand Mould: A Numerical and Experimental Study
Abstract: Casting which is also known as founding, is one of the earliest metal shaping methods. It means the pouring of molten metal into the refractory mould then allowing it to solidify. After solidification removing of part from the mould either by breaking the mould or ejecting the mould part. Present study has been focused on solidification of brass in green sand mould formulation. Two-dimensional heat conduction equation in cartesian co-ordinate …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 3, 2015 · pp. 24–30 Read article
-
Physical Characterization of New Li-Ion Conducting NASICON Materials in the LI1+2XTA1-XALX+1(PO4)3 System
Abstract: AbstractFabrication of all-solid-state Li battery with non-flammable ceramics electrolyte has been strongly required to overcome safety issues of present Li batteries. One of the promising structures of ceramic electrolyte in solid state battery is the NASICON structure composed of 3 dimensional frameworks (s.g. R-3c). In this study, Li-ion conducting mixed metal phosphate Li1+2xTa1-xAlx+1(PO4)3, L Ta A P-x(x = 0 ~ 0.5) solid electrolyte that possess rhombohedra NASICON structure was prepared …
Published in Journal of Semiconductor Devices and Circuits · Vol. 6, Issue 3, 2019 · pp. 25–32 Read article
-
Flame Spraying of Polymer-Abrasive Composites
Abstract: Polymer-based abrasive tools are distinguished by higher elasticity and resistance to chemically active media compared to tools with metal and ceramic binders. The former are effective at processing complex-profile and non-rigid surfaces. Tools based on coatings containing abrasive phenol- formaldehyde/epoxy resins and vulcanites are characterized by high cost and toxicity. In this paper, a study of composite flame-sprayed coatings, consisting of thermoplastic polymers and silicon carbide (volume ratio of 50-50), …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 96–104 Read article
-
Dynamic Modelling of Natural Draft Cooling Tower (Case Study of Notore Chemical Company)
Abstract: Determining the impact of air, water, and temperature flow rates on the cooling tower of Notore Chemical Industries is the aim of this study. Using a dynamic and simulation model derived from fundamental ideas, this study produced a model equation for an ordinary differential equation. The Runge-Kulta ODE45 technique, which was implemented in MATLAB R2022A, was then used to solve the model equation.The twenty-four-hour simulation runs at one-hour intervals. To …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 18–24 Read article
-
Machinability Studies of Chrome Steel in Turning Operation: An Experimental Investigation
Abstract: Studies on Machinability aspects are important from the standpoint of optimizing the parameters setting during the machining operations. This paper adds value to the knowledge base of machinability aspects. A report on the experimental investigation conducted, to study the effects of machining parameters on Surface Finish and Material Removal Rate (MRR) during the turning operation is presented. The current experimentation was carried out using two grades of chrome steel namely …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 2, 2016 · pp. 10–18 Read article
-
Design and Investigation of Peltier Technology for Automobile Air-Conditioning Unit
Abstract: AbstractIn recent years, market of heating, ventilation and air-conditioning system (HVAC) has escalated a lot. These units provide cooling and conditioned atmosphere to automobiles, buildings, cold storage etc. HVAC units are very reliable and effective but they produce some adverse impact on environment. This paper proposes the use of solar energy with thermoelectric (Peltier) technology. In order to determine the efficiency of solar energy assisted thermoelectric module, it is necessary …
Published in Journal of Microelectronics and Solid State Devices · Vol. 6, Issue 3, 2019 · pp. 37–42 Read article
-
Thermodynamic Optimization and Exergy-Based Performance Analysis of Hybrid Thermal Management Systems for Electric Vehicles
Abstract: The transition toward sustainable transportation has brought electric vehicles (EVs) to the forefront of modern engineering innovation. Despite their environmental benefits and improved energy efficiency, EVs face major thermal challenges that affect performance, safety, and durability. Efficient thermal management of batteries, power electronics, and electric drive systems is vital to ensure reliability under diverse operating conditions. This study presents a detailed thermodynamic optimization and exergy-based performance analysis of hybrid thermal …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 2, 2025 · pp. 19–23 Read article
-
Development of Smart Cooling Optimization System for CNC Machining Applications
Abstract: In modern manufacturing industries, achieving high machining accuracy, improved surface finish, and extended tool life remains a significant challenge, particularly during the machining of hard materials where excessive heat generation at the tool–workpiece interface is inevitable. Conventional coolant systems often suffer from limitations such as manual control, inconsistent flow rates, and inefficient coolant usage, which negatively impact productivity and environmental sustainability. This paper presents the design and development of an …
Published in Journal of Mechatronics and Automation · Vol. 13, Issue 2, 2026 · pp. 1–13 Read article
-
Simulation of Dual Microstructure Heat Treatment Process and Residual Stresses in Gas Turbine Disc by DeformHT Software
Abstract: Gas turbine disc is one of the most vital components in advanced gas engine. In order to improve the tensile strength and fatigue strength of the disc, finer grain size is to be attained at bore area and coarser grain structure at rim area in order to resist the growth of creep. Attempts have been made by several researchers experimentally on the development of dual microstructure for Inconel-718 by heat …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 1, 2017 · pp. 30–42 Read article
-
Comparative Cooling Analysis of EV Battery Packs using MATLAB Simscape
Abstract: Since electric vehicles (EVs) transition to high- voltage systems to enable quicker charging and enhanced delivery of power, the high heat emitted during rapid discharge is a significant challenge. This paper presents a direct comparative study of passive air cooling and active liquid cooling of a lithium-ion battery pack. Due to the high cost of constructing the physical prototypes, we created a computationally efficient and hierarchical virtual prototype in MATLAB …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 4, Issue 2, 2026 Read article
-
Design and Performance Evaluation of A Refrigeration System Utilizing The Peltier Cooling Effect
Abstract: A domestic refrigerator with 5star rating and having capacity 180 Liters consumes 265 units per year. In India average cost of electricity consumption per unit for domestic usage up to 100 units is Rs 5.31per Unit and beyond 300 units it is Rs.8.95 and for industrial it may go beyond Rs 10.45/kWh. This scenario demands for alternative cooling technology that can replace totally VCR (vapour compression refrigeration) system. This thesis …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 1, 2026 · pp. 34–47 Read article
-
Experimental investigation of humidification-dehumidification desalination system
Abstract: The aim of present study is to investigate an H-DH desalination system experimentally. The system consists of a solar air heater, a humidifier, and a dehumidifier connected with an evaporative cooler. The proposed system is operated in a closed loop configuration, at two airflow rates. The performance metrics are assessed via the examination of energy and economic factors. The solar air heater has the ability to produce hot air with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 104–113 Read article
-
Experimental Study on the Wear Mechanisms of Cutting Tools in High-Performance Machining
Abstract: Because high-performance machining (HPM) may increase output and improve product quality, it is essential for modern production. The quick wear of cutting tools under high-stress circumstances, however, presents serious difficulties that affect surface smoothness, tool life, and cost-effectiveness. Through an analysis of the impacts of cutting speed, feed rate, tool material, and cooling techniques, this work explores the wear processes impacting cutting tools in HPM. Advanced spectroscopy and microscopy procedures …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 9–14 Read article