Search
484 articles for “composite characterization”
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Innovative Synthesis Techniques and Comprehensive Mechanical Characterization of Biopolymer-Based Composites for Advanced Applications in Biochemistry and Materials Sciences
Abstract: Biopolymer-based composites have gotten a lot of attention lately because they could be used in biology and materials science in interesting ways. The main goal of this study is to come up with new ways to make composites and then fully characterize their material properties so that they can be used in more advanced ways. During the production step, a new method is used that combines green chemistry ideas with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 119–136 Read article
-
Enhancements in Titanium Matrix Composites: A Multifaceted Exploration of Various Structural Ceramics Reinforcement
Abstract: This research study delves into the comprehensive exploration of Titanium Matrix Composites (TMCs) reinforced with Silicon Carbide (SiC), Alumina (Al2O3), and Boron Nitride (BN). The investigation is structured into three key phases, each addressing essential aspects of TMCs: Phase 1 involves materials and manufacturing, where TMC coupons were fabricated through the stir casting technique with varying compositions of aluminum and silicon carbide. Phase 2 focuses on characterization and defect detection, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 83–94 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Advanced Polymer Composite Coating for Thermal Performance and EEE Improvement of a Solar Energy Harvesting System
Abstract: The integration of carbon-based nanomaterials with polymer matrices presents a promising route toward advancing solar energy harvesting technologies. In this study, nanoparticle-blended polymer composite coatings are examined to evaluate the performance of FPSC, utilizing an unconventional collector setup and a multiple-carbon-based nanoparticle-blended paint polymer. Nanomaterial provides a crucial alternative for enhancing their thermal efficiency. The research findings reveal that the deformation of nanomaterials improves the heat efficiency of solar collectors. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1197–1222 Read article
-
Comparative Analysis of Processing-Property Relationships in Metal and Polymer Matrix Composites: A Unified Statistical Framework for Hardness Characterization
Abstract: Composite materials, encompassing both metal matrix composites (MMCs) and polymer matrix composites (PMCs), exhibit complex processing-property relationships that fundamentally govern their mechanical performance across diverse applications. This study presents a unified statistical framework for analyzing hardness characteristics in composite systems, using aluminum-tungsten carbide (Al-WC) metal matrix composites as a representative model system while establishing connections to polymer matrix composite behavior. The investigation employed comprehensive processing parameter optimization, microstructural characterization, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 419–430 Read article
-
Exploring the Mechanical Characteristics of Three Natural Composite Materials (Kenaf, Sisal, and Banana with Almond shell, Glass, and Silicon carbide fillers): A Comparative Evaluation
Abstract: The current global demand for lightweight, long-lasting, and economically efficient materials is of unprecedented magnitude. Industry sectors including aircraft, automotive, construction, and sports are constantly adapting to fulfil these requirements. Natural composites refer to materials obtained from natural sources that utilise two or more separate components to form a material with improved characteristics. In numerous industries, natural composites offer a potential and ecologically sound alternative to synthetic materials by harnessing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 492–502 Read article
-
Experimental Evaluations of the Tensile and Impact Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers
Abstract: In marine engineering design, polymeric composites reinforced with natural fibers are frequently used. Through hybridization, natural fiber plastic composites' mechanical properties can be improved. Assessing the performance of recycled newspaper fiber (rNF) and rNF/glass fiber (GF) hybrid polypropylene composites is the aim of the current experiment. Using maleic anhydride (MA) as a coupling agent, the effects of GF loading on the impact strength and tensile behavior of composite materials with …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 1, 2025 · pp. 30–39 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Fabrication and Characterization of Hybrid Composites Using Natural Fibers Reinforced in HDPE and Optimization of Injection Moulding Process Parameters to Minimize Shrinkage
Abstract: Materials are crucial for advancing human living standards. Over the past 20 years, composite materials have garnered significant attention owing to their unique properties and applications across various sectors. This study outlines the creation and analysis of a novel series of natural fiber-based composites, which incorporate jute, sisal, and hemp as reinforcements, with high-density polyethylene (HDPE) serving as the matrix, and produced through injection moulding. This study examines the effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 556–585 Read article
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Development and Characterization of Rubber Composites using E-Waste Residue as Functional Filler
Abstract: In the present study, residue generated during the recycling of end-of-life printed circuit boards (PCBs) was utilized as a functional filler in natural rubber to fabricate eco-friendly composites using mixing and molding techniques. Chemical analysis of the residue revealed the presence of several metals, including copper, iron, lead, tin, and zinc. The presence of these metals highlights the need for proper recycling and safe management of PCB residues, as their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 512–523 Read article
-
A Review on Integrated Acoustic Emission and Piezoelectric Sensing for Real-Time Damage Characterization of Polymer Composite-Enhanced Concrete: Advances, Challenges, and Future Perspective
Abstract: Polymer composite reinforced concrete has been identified as an efficient material system that can enhance the mechanical properties, durability, and service life of modern structures. The combination of fiber reinforced polymers (FRPs), polymer modifiers, and hybrid composite reinforcements increases structural effectiveness. However, these systems are still vulnerable to damage processes, including matrix cracking, fiber breaking, interfacial debonding, and delamination. Thus, there is a need for structural health monitoring (SHM) strategies …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 930–939 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Polymer Matrix Characterization and Interfacial Engineering in Bamboo/Sisal/Chopped Mat Hybrid Fiber Composites
Abstract: The present investigation focuses on the characterization of polymer matrices and the interfacial behavior of bamboo, sisal, and chopped strand mat (CSM) fiber-reinforced epoxy composites. The work aims to understand how natural fibers influence the curing, thermal, and adhesion properties of hybrid composite systems. Experimental analyses were carried out using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) to evaluate curing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 123–135 Read article
-
Development and Characterization of Antimicrobial Polymer Composites for Food Packaging Applications
Abstract: The increasing demand for sustainable and antimicrobial food packaging materials has led to extensive research in polymer-based composites. This study focuses on developing a polyethylene terephthalate-ethylene vinyl acetate (PET-EVA) composite reinforced with metal oxide nanoparticles (MONs), including Cu₂O, ZnO, and MgO₂. These nanoparticles were selected for their antimicrobial properties and ability to enhance the functional characteristics of the composite. Structural, chemical, mechanical, and barrier properties were extensively evaluated to determine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 86–93 Read article
-
Material Characterization Analysis of Fiber Reinforced Composites
Abstract: The study investigates the physical characteristics of PAN carbon fabric/epoxy composite which is a material commonly utilized in aerospace, defense, and automotive sectors. The material has exceptional mechanical properties like high specific strength and hardness. The materials utilized in this experiment are T-300 PAN carbon fabric, LY556 Epoxy resin, and HY5200 hardener to create pre-preg materials. Then the laminate was pre- pregged in a die mold of identical shape matched, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 230–243 Read article
-
Bonding Strength Characteristics of FRP Cylindrical Composites Under Hygrothermal Loading
Abstract: This study investigates the bonding strength characteristics and stress distribution patterns in fiber-reinforced polymer (FRP) cylindrical composites subjected to hygrothermal loading conditions. A four-phase cylindrical model incorporating AS-Graphite and S-Glass fibers with low modulus epoxy coating was analyzed under four distinct pressure loading conditions (25.984, 38.976, 77.953, and 155.906 MPa). Comprehensive stress analysis revealed significant variations in von-Mises stress, maximum principal stress, and minimum principal stress across fiber, coating, matrix, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 950–967 Read article