Search
18 articles for “compatibilizers”
-
Thermal Stability of Compatibilised Natural Rubber/ Chitosan Blends
Abstract: The thermal degradation behavior of Natural Rubber /Chitosan (NR/CS) blends compatibilised with maleic anhydride (MA) was studied by thermogravimetric analysis (TGA). The TGA shows that the MA modified blends are more stable than the pure blends. MA acts as a reactive compatibiliser in NR/CS blends. MA grafted NR chain is highly reactive towards the functional group on the chitosan moiety, and when pressing at elevated temperature interaction develops between the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 123–133 Read article
-
Studies on Mechanical, Thermal Properties, Characterization and UV-Accelerated Weathering of HIPS-PLA Blends using Glycerol as Compatibilizer
Abstract: AbstractHIPS (High Impact Polystyrene) was blended with PLA (poly lactic acid) in three formulations as 80:20, 65:35 and 50:50% (wt%) using a twin screw extruder and by using glycerol (4%) as compatibilizer. Test specimens were prepared by using an injection moulding machine and the mechanical, thermal and electrical properties were determined. The tensile strength first decreases and then increases with increasing percentage of PLA, but lower than that of both …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 1–11 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Polysaccharide Mixed Thermoplastic Biodegradable Polymer: Synthesis and Performance Evaluation
Abstract: Polysaccharide-based decomposable plastics have attracted much attention due to their plenteous supply and low price. The difficulty in making environmental plastics is incompatible between hydrophilic/polar and hydrophobic/non-polar components. Two separate compatibilizers were included to increase the compatibility between the two ingredients. The objective of existing research is to create an ecological polymer composite using rice starch, which could be a step towards an alternative user-friendly polymer composite. A base material …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 12, Issue 2, 2022 · pp. 24–35 Read article
-
Preparation and Properties of Blends of Thermoplastic Polymer with Thermoplastic Starch
Abstract: Problems in making biodegradable plastics are incompatible between hydrophilic/polar and hydrophobic/non-polar ingredients. Ingredients like compatibilizers were added to improve the compatibility between the two ingredients. The purpose of this study was to determine the effect of thermoplastic potato starch (TPS) content and two compatibilizers (maleic anhydride, MA, and dibutyl maleate, DM) on melt flow behavior, mechanical features (tensile, bending, and Izod impact test), phase morphology, thermal behaviors (DSC, and TGA/DTG), …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 1, 2022 · pp. 16–29 Read article
-
Nanocomposites of Polyethylene-Closite 20A: Preparation and Characteristics
Abstract: Low-density polyethylene/closite 20A nanocomposites with different organoclay contents were made in the current study by a melt mixing technique with two different compatibilizers of varying contents: low molecular weight oxidized polyethylene and low molecular weight trimethoxysilyl modified polybutadiene. The inclusion of compatibilizers and concentrations of organoclay were analyzed in relation to the mechanical and thermal properties of the nanocomposites. The dispersibility of the silicate clay in the nanocomposites was investigated …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 1, 2025 · pp. 01–12 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · pp. 56–66 Read article
-
Fabrication and Properties of Recycled PET Reinforced Waste Cellulosic Fiber Composites
Abstract: The economic utilization of lignocellulose waste, which is now being explored, is one of the environmental problems confronting third-world nations. Waste cellulosic fiber (paper sludge, PS) composites will enable the cost of the composite to be reduced while allowing for the efficient use of a waste material that is presently burned or buried. Environmentally friendly composites made from PSreinforced recycled poly(ethylene terephthalate) (rPET) matrix with the addition of SEBS-g-MA as …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 1, 2023 · pp. 9–20 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
Composite Behavior of Bagasse Ash Stabilized Expansive Soil with Sodium Benzophenone Under Curing Conditions
Abstract: The present investigation examines the development of a hybrid composite using Black Cotton (BC) soil, Bagasse Ash (BA), and Sodium Benzophenone (SBP) as performance-enhancing elements. Different ratios of BA, a silica-rich agro-industrial by-product, were added to improve pozzolanic reactivity and particle size distribution (0%, 6%, and 12%). SBP was added in the range of 0–0.6% as a compatibilizer in order to enhance interfacial adhesion, particle cohesivity and moisture-assisted deterioration resistance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1134–1146 Read article
-
Valorization of Fruit and Vegetable Wastes for CA Production: A Comprehensive Review with Emphasis on Aspergillus niger Bioprocessing and Future Prospects
Abstract: Citric Acid (CA) is a multifunctional organic acid with diverse industrial applications, recently gaining prominence in polymer and composite science as a green crosslinker, compatibilizer, and functional additive. Conventionally produced through submerged fermentation of refined sugars by Aspergillus niger, industrial CA production faces sustainability challenges due to reliance on food-grade substrates. This review highlights emerging strategies for CA biosynthesis from vegetable and fruit processing residues—including cucumber peels, broccoli stalks, spinach …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 807–822 Read article
-
Physicochemical Transitions and Polymerization Dynamics in Multi-Generational Dentin Adhesives: A Critical Review of the Resin-Dentin Composite Interface
Abstract: Adhesive dentistry has undergone a transformative refinement over the past three decades, transitioning from technique-sensitive, multi-step etch-and-rinse protocols to streamlined universal formulations. This narrative review critically synthesizes evidence from thirty peer-reviewed investigations to evaluate the evolution of dentin bonding agents from the fourth through the eighth generations. The analysis places particular emphasis on the physicochemical dynamics of the resin-dentin interface, including interfacial bond strength metrics, marginal integrity, and microleakage behavior. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 209–228 Read article
-
Studies on Mechanical, Thermal, Physical Properties and Characterisation of PLA-EVA Blend with Microclay and Product Development
Abstract: PLA-EVA (70:30 wt. %) with microclay (1, 3, 5 wt. %) was also melt blended using Glycerol (1%) was used as compatibilizer in a twin screw compounding extruder. Then test specimens were prepared by an injection molding machine. Mechanical, thermal and physical properties were evaluated. As microclay content was increased, the tensile strength, elongation at break and tensile modulus were slightly decreased but higher than that of PLA-EVA (30 wt. …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 24–33 Read article
-
Effect of Length and Tenor of the Introduction of Sansevieria cylindrica Fibers on the Mechanical Performance of Natural Fiber Composites
Abstract: The substitution of synthetic fillers, such as carbon black, with biobased ones in natural rubber (NR) is a trend of interest in view of increased sustainability and exploitation of agroforest waste in the materials sector. In this work, NR was filled with short fibers extracted from Sansevieria cylindrica (SC) leaves of various length (10, 20, 30, or 40 mm) and in different amounts (3, 6, or 10 g per 100 …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 94–101 Read article
-
Hybrid Agro-Waste Reinforced PLA Smart Composites with Embedded NFC for Sustainable Lifecycle Monitoring
Abstract: The growing demand for sustainable engineering materials has accelerated the development of biodegradable polymer composites capable of combining structural performance with intelligent lifecycle management. In this study, a smart biodegradable agro-waste polymer composite reinforced with rice husk and sugarcane bagasse fibres was developed using a polylactic acid (PLA) matrix integrated with an embedded passive Near Field Communication (NFC) tag for digital traceability and circular economy applications. The composite containing 80 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Bionanocomposites in Green Synthesis of Bioplastics - The Composite Materials of Future & Their Role in Circular Bio-Economy
Abstract: The pervasive use of petroleum-derived plastics has caused severe environmental pollution, accumulating in landfills and oceans while threatening human and animal health. This ecological crisis has accelerated an urgent transition toward biodegradable polymers within the circular bioeconomy. Bionanocomposites, comprising a biodegradable polymer matrix integrated with nanoscale fillers, successfully bridge the gap between high industrial performance and environmental responsibility. By incorporating advanced nanofillers such as cellulose nanocrystals, chitin nanofibers, layered silicates …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 2, 2026 Read article