Search
15 articles for “cement mortar”
-
Analysis of Thermo-Mechanical Properties in Cement Mortar Using Synthesized Silicate Microencapsulation of Phase Change Materials by Sol-Gel Process
Abstract: This investigation delves into improving building thermal comfort using microencapsulated phase change materials (PCM@SiO2) in cement mortar. The encapsulation process, achieved via a sol-gel method, envelops PCM in a silicate shell Differential Scanning Calorimetry (DSC) and Fourier-Transform Infrared Spectroscopy (FTIR) were used to confirm the thermal properties and integrity of encapsulated PCM, which showed an encapsulation efficiency of 92.7% and a thermal storage capacity of 99.7%. The study involved the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 152–160 Read article
-
Experimental Investigation on Nitrogen Oxides Air Pollutant Reduction Characteristics of Cement Mortar Using Sustainable Photocatalytic Material
Abstract: Emissions of nitrogen oxide (NOx) should be diminished to address the facts of urban air pollution and its health and environmental consequences. This study explores the potential of NOx reduction of photovoltaic pollutants in cement mortar using titanium dioxide (TiO2) as a photovoltaic material. NOx is one of the major pollutants of urban air, related to the problems of smog and acid rain, with serious health hazards. The study focuses …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 · pp. 26–40 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
Strengthening of Hydraulic Lime with Synthetic, Organic, and Bio-Additives: State-of-the-Art Review on Eco-Friendly Construction
Abstract: Cement is acknowledged to be one of the significant modern construction materials used all over the world because of its excellent properties. Though cement dominates the construction industry, the usage of lime binder is still replaceable because of the need for restoration and repair of existing heritage structures. Though lime offers several advantages such as “breathing”, higher durability and deformability, the performance of the lime mortar is still mistrusted because …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 87–96 Read article
-
Comparative Analysis of Polyethylene Terephthalate Based Blended Lean Mortar Mixes by Applying Mathematical Simulations and Regression Approach
Abstract: Currently, construction manufacturing units need an abundant number of non-renewable resources rising in the quarrying of natural strata, producing a disparity in our precious environment. Besides this, a plentiful amount of waste material like plastic waste in several forms such as solid, filler, etc., is generated gradually. Therefore, efficient sustainable disposal seemed like a threatening mission across the world. To mitigate the issue, in the present investigation, fine aggregate (sand) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 60–70 Read article
-
Enhancing Strength and Durability: A Study of Mortar Blocks with Steel Slag Incorporation and the Development of Steel Slag Lime and Cement Blocks
Abstract: This study is focused on investigating the strength and durability properties of mortar cubes made with slag cement and incorporating Ultra Fine Steel Slag (SS) as a potential replacement for natural fine aggregates (FNA). In some instances, the cement was entirely replaced with hydrated lime to develop the blocks. A battery of tests, including assessments of compressive strength, acid resistance, sulfate resistance, water absorption, and void analysis, were carried out …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 233–246 Read article
-
To Study the Effect of Partial Replacement of Cement with Marble Powder and Partial Replacement of Sand with Surkhi
Abstract: The construction industry worldwide has made remarkable progress in building innovative structures using different materials. Today’s increasing population demands more sustainable ways of living. Waste matter produced in the day-to-day life as well as industrial waste has become a cause of concern. Many waste materials have been used in construction industry like flyash, saw dust, natural fibers residue etc. Keeping in mind the above concern a low cost, environment friendly …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 46–54 Read article
-
Strength Prediction and Optimization of Portland Limestone Cement Blended with Metakaolin and Rice Husk Ash
Abstract: This study explores the effects of Rice Husk Ash (RHA) and Metakaolin (MK) on the compressive strength of Portland Limestone Cement (PLC) mortar, aiming to promote sustainable construction materials. RHA and MK, derived from agricultural and industrial byproducts, serve as supplementary cementitious materials (SCMs) that offer environmental benefits and improve cement properties. Using response surface methodology (RSM) and central composite design (CCD), the research optimized the ternary blend of PLC, …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 1–14 Read article
-
Influence of Supplementary Cementitious Materials on Chemical Shrinkage in Cement
Abstract: Chemical shrinkage is the volume reduction observed in cement during early hydration due to chemical reactions, which critically influences the internal stresses, cracking tendencies, and durability of cementitious system. Present study is focused on effect of supplementary cementitious material (SCM) on chemical shrinkage. Dilatometry method is used to assess the impacts of SCMs on chemical shrinkage, in this this study. The research incorporates experiments with laboratory-synthesized cement and three SCMs—fly …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 98–107 Read article
-
Application of Paper Mill Lime Sludge Waste in Building Construction Material: State of The Art Report
Abstract: A Comprehensive Literature review is done to find various areas of application of Lime Sludge. Temperature-treated Lime sludge proves to be highly beneficial to be used as Building material. Lime Sludge has an application area in all types of Building materials such as bricks, Tiles, Cement etc. especially, in Cement it is highly beneficial in all the phases of cement from Clinker to, mortar and as a replacement in Concrete. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 73–88 Read article
-
Comparative Evaluation of the Pozzolanic Activity of Artificial Pozzolans: Steel Slag, Fly Ash, and GGBFS
Abstract: Evaluating the pozzolanic activity of specific industrial waste is crucial given the growing demand for cementitious materials. This research aims to expand the possibilities of incorporating pozzolanic waste such as Steel Slag (SS) as additives to cement. SS is a byproduct of the steel production process. A byproduct of the steelmaking process, slags have long been used as aggregates in building materials like concrete and roads. A closed-loop structure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 341–361 Read article
-
Investigation on the mechanical characteristics and productivity of GGBS based geopolymer mortars
Abstract: It has been known for decades that geopolymer will significantly replace cement's function in construction industry. Geopolymer has low creep and shrinkage and a peak compressive strength. That is as per a recent study, geopolymer mortar is made by Fly ash and GGBS. The composition includes (100-60%) GGBS with a 10% substitution of fly ash. Alkali activators used in the research are sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). In …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 253–264 Read article
-
A Review on Sustainable Utilization of Dimensional Stone Waste as Construction Material
Abstract: The non-biodegradable nature of stone waste enhances the worldwide problem of disposal. A lack of land for waste landfills, increased transportation costs, and other related problems have compelled industries to look for alternative solutions. Depletion of natural resources has also been brought about by the construction industry's excessive use of resources like cement, river sand, and natural aggregates. As a result, the demand for sustainable and commercially feasible alternatives is …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 76–85 Read article
-
A Review of Properties of Geopolymer Concrete
Abstract: The growing need for concrete around the world has led to both more concrete being made and more of it being used. Carbon dioxide is released into the atmosphere when regular Portland cement is made, which contributes to global warming (OPC). because concrete that is good for the environment needs new kinds of binders. Using different binders could cut down on the energy needed to make traditional concrete and the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 60–69 Read article
-
Review of Research on Pozzolanic Materials for Cement Blending and Concrete Applications
Abstract: The growing environmental concerns associated with cement production, particularly its high carbon footprint, have driven research into sustainable alternatives such as supplementary cementitious materials (SCMs) derived from agricultural and industrial waste. This study synthesizes findings from recent investigations into the pozzolanic potential of basil plant ash (BPA), rice husk ash (RHA), and stockpiled fly ash (FA), evaluating their processing methods, microstructural characteristics, and performance in concrete applications. BPA, being derived …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article