Search
41 articles for “carbon fibre”
-
Enhancing Mechanical and Thermal Performance of M30 Concrete with Carbon Fibre Reinforcement
Abstract: This study examines the influence of carbon fibre incorporation on the mechanical properties of M30-grade concrete. A series of experimental investigations were conducted to assess the effects of varying carbon fibre content on compressive, split tensile, and flexural strengths. The results indicate a significant enhancement in mechanical performance with the inclusion of carbon fibres, with the optimum fibre dosage identified as 0.75%. At this content, the concrete achieved a peak …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 252–260 Read article
-
Comparative analysis of carbon fibre and E-glass fibre characteristics
Abstract: In the contemporary automotive industry, the imperative focus on energy efficiency has driven the central role of lightweight, addressing challenges such as emissions reduction and fuel efficiency. Extensive research is underway to develop lightweight materials enhance recyclability, integration feasibility, and overall fuel efficiency These experiments were conducted in agreement with ASTM D638, ASTM D790-03, and ASTM D790 standards to ensure adherence to industry standards and facilitate meaningful comparisons. For the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 253–267 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
Recyclable Vitrimer-Matrix Carbon Fibre Composites for Aerostructures: Reprocessing Efficiency and Retention of Mechanical Performance
Abstract: To begin, carbon fiber reinforced polymers (CFRP) have become an important part of the structural loading in many modern aircraft; however, due to their permanent cross-linking in thermosets, they cannot easily be restored after being retired. Vitrimers have been proposed as a solution since their Covalent Adaptable Networks (CANs), rearranged by associative exchange, may be reshaped, welded, repaired or dissolved without damaging the CFRP fibers. This paper reviews whether the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Design and Development of Ankle Foot Orthosis for Foot Amputated Person by Using Carbon Fibre
Abstract: Ankle and foot orthotics play a pivotal role in the rehabilitation of individuals who have suffered a stroke, aiding in the restoration of their gait and overall mobility. However, optimizing the effectiveness of these orthoses requires a personalized approach that takes into account each patient's unique biomechanical characteristics. This study delves into the innovative use of carbon fiber combined with cost-effective 3-D printing technology to craft custom foot plate orthoses …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 115–121 Read article
-
Design, Analysis, and Testing of a Carbon Fibre-based Solid Rocket Motors
Abstract: The goal of the research is to simulate the outer shell of a rocket in order to fulfil mission criteria. Case failures can occur for a number of causes, including poor material selection, carelessness in the service conditions, inadequate non-destructive testing during crucial stages of production, and poor design and analysis. For this reason, it is crucial to simulate rockets with precise design and analysis. The study entails the designing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 650–669 Read article
-
Experimental Investigation Mechanical Behaviour of Composite Made by Carbon Fibre Mixed with Zro2 and Phenolic Resin
Abstract: Composites are one of the major research criteria in aerospace technologies to fulfil the present needs. Addition of materials to carbon fibers without increasing of weight of the parts Nano and micro fillers have its own criteria in improving mechanical properties. ZrO2 particles added to carbon fibers can improve the strength with a light add up in density. Present study focused on the mechanical behavior of zirconium oxide addition to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 562–573 Read article
-
Evaluation of Impact Strength and Hardness for Polymer Matrix Composites with Steel, Carbon and Glass Reinforcements for Automotive Applications
Abstract: Polymer matrix composites (PMCs) play a crucial role in a wide range of engineering submissions, owing to their impressive strength-to-weight ratio and customizable mechanical properties. This research focuses on examining how PMCs, enhanced with different materials, specifically carbon fibres, glass fibres, and steel fibres, behave when subjected to dynamic and static loading conditions. The study involves creating three distinct types of PMC specimens, each reinforced with one of the mentioned …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 738–748 Read article
-
Computational Analysis of Leaf Spring System with Functionally Graded Materials Using ANSYS
Abstract: Leaf springs are important parts of a vehicle’s suspension system, and their main function is to absorb shocks, improve stability, and make the ride more comfortable. Traditionally, ASTM A36 steel is used because it is strong, long-lasting, affordable, and easy to get. However, this type of steel is very dense, which makes vehicles heavier. This extra weight makes the vehicle less efficient and increases emissions. Because of these issues, there …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 380–397 Read article
-
Investigating The Feasibility of Basalt Fiber as A Carbon Fiber Substitute in Composites for Automotive Applications
Abstract: The escalating carbon footprint, a consequence of dwindling natural resources and surging energy demand, necessitates immediate measures to mitigate environmental impact. This prompted the current study: to look at alternative manufacturing materials that could be utilized as a carbon-free substitute without compromising on mechanical properties. Basalt fiber was identified as a potential eco-friendly replacement to carbon fiber which has several advantages over carbon fiber and is entirely natural and biodegradable. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 275–285 Read article
-
Effect of Aging on the Performance of Polymer Composite: A Review
Abstract: The exceptional robustness, corrosion resistance, and lightweight design, polymer composites (PCs) are crucial to modern engineering escalating the utilization of polymer composite in structural applications including aerospace engineering, automobile engineering, etc. With a greater number of positive aspects, the polymer composite also deteriorate by different environment conditions with their exposing duration considered as aging of polymer composites. However, a variety of elements influencing the ageing process determine their long-term performance. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 752–768 Read article
-
Effect of Carbon Nanotube on Mechanical Properties of Jute Fibre Reinforced Polyester Composite
Abstract: The current study studies how carbon nanotubes affect the mechanical characteristics of polyester composites reinforced with jute fiber, both treated and unprocessed. Alkali was used to cure jute textiles. Composites with treated and untreated jute fibre with 5%, 10% and 15% jute fibre loading with and without carbon nanotube were prepared using hand lay-up process. Carbon nanotubes varied from 0.2%, 0.4% and 0.6%. Tensile, flexural, and strength of impact all …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 1–9 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Composite Solutions for Sustainable Mobility: Aluminum Alloy, Carbon Fiber, and Graphene in Chassis Frame Design
Abstract: This study describes the design and analysis of a chassis frame made of carbon fibre, graphene, and aluminium alloy composite materials. A frame must be able to sustain vibration, shocks, and bending and torsional pressures. This piece of work uses a rectangular cross-sectional area to design a frame. After that, the simulated chassis is taken for investigation using composite materials such as aluminium alloy and carbon fibre reinforced with graphene. …
Published in International Journal of Solid State Innovations & Research · Vol. 1, Issue 2, 2023 · pp. 1–7 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Problems and Difficulties in the Additive Manufacturing of Composites with Carbon Fiber Reinforcement for Medical Application
Abstract: Amputation is more prevalent than one may think due to an accident, war, or disease. Prosthetics and associated orthotics have a combined global market value of $2.8 billion. Carbon fibre has found a market due to increased demand for foot prostheses. Fused deposition modeling (FDM) is a rapidly advancing three-dimensional (3D) printing technique. PEEK (polyether-ether-ketone) is a biocompatible, high-performance polymer that could potentially be utilised as an orthopedic surgery implant …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 8–12 Read article
-
Experimental Investigation of Various 3D Printing Materials for Making Travel Bag Wheels
Abstract: 3D printing is one of the emerging areas of manufacturing. Fused deposition modelling (FDM) is widely used 3D printing technique in various fields like jewellery, fashion, art and sculpture, medical, etc. In this paper, different polymer materials like ABS (Acrylonitrile Butadiene Styrene), PLA (Polylactic Acid), carbon fibre, PETG (Polyethylene Terephthalate), HIPS (High Impact Polystyrene), etc. were analysed for compressive strength by preparing standard specimens according to ASTM standard D695 to …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 1–7 Read article
-
Optimizing Vehicle Structures Using Functionally Graded Materials of Aluminum and Carbon Fiber Reinforced Polymer Composites
Abstract: This article investigates the optimization of vehicle structures through application of functionally graded materials (FGMs), specifically aluminium and carbon fibre reinforced polymer (CFRP) composites. Such materials, known as FGMs, are characterized by spatial variations in composition and structure designed to improve so-called performance attributes. For the purposes of this research, the material properties of aluminium and CFRP composites are taken to be randomly distributed in thickness direction of a FGM …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 478–489 Read article
-
Machine Learning Optimization for VARTM Carbon Polymer Laminates
Abstract: Vacuum-assisted resin transfer moulding (VARTM) is a key low-cost, out-of-autoclave process for manufacturing large-scale carbon-fibre reinforced polymer (CFRP) laminates crucial to aerospace wings, wind-turbine blades, marine hulls, and automotive structures. Unpredictable resin flow often leads to voids, dry spots, and race-tracking defects, resulting in 27.9% scrap rates and lengthy, costly trial-and-error design cycles. Although surrogate models provide rapid impregnation predictions for simple flat-plate geometries, vision-based monitoring is limited to idealized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–245 Read article