Search
117 articles for “carbides”
-
Experimental Analysis of Cutting Forces Under Different Machining Parameters and Carbide Inserts During Turning of Hardened AISI 4340 Steel
Abstract: Turning of hardened materials with an advanced coated carbide insert has numerous advantages over the grinding process, e.g., reduced process cost, high material removal rate, and less environmental concern due to the elimination of the cutting fluid. Process parameters in conventional machining operations like cutting speed, feed, and depth of cut play the most crucial role behind the generation of heat which also leads to microstructural changes, improved tool life, …
Published in Journal of Polymer & Composites Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Corrosion Characterization of Silicon Carbide and Fly Ash Particulates Dispersion Strengthened Aluminium 5083 Composites
Abstract: Corrosion behavior of aluminium metal matrix composites is a major study aimed at evaluating the potential of using the materials for aerospace components. Aluminium 5083 is a specific class of alloy which is known for its corrosion resistance in extreme environments and is used in aerospace components. However, the studies on effect of reinforcements such as silicon carbide and fly ash on corrosion behavior of aluminium 5083 alloy has not …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 2, 2017 · pp. 9–21 Read article
-
Fabrication and characterization of Tensile properties ofaluminium 5083/silicon carbide/fly ash composites for advanced engineering applications
Abstract: The present work includes the fabrication of hybrid Metal Matrix Composite materials by consolidating the attractive traits of Metals, Ceramics and byproducts of combustion in power plants. More often than not, when no less than two reinforcements are introduced into the matrix phase, it is known as a hybrid composite and current research focuses on fabrication and characterization of composite materials. Aluminum Metal Matrix Composites with Silicon carbide reinforcements are …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 6–9 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Exploring the Mechanical Characteristics of Three Natural Composite Materials (Kenaf, Sisal, and Banana with Almond shell, Glass, and Silicon carbide fillers): A Comparative Evaluation
Abstract: The current global demand for lightweight, long-lasting, and economically efficient materials is of unprecedented magnitude. Industry sectors including aircraft, automotive, construction, and sports are constantly adapting to fulfil these requirements. Natural composites refer to materials obtained from natural sources that utilise two or more separate components to form a material with improved characteristics. In numerous industries, natural composites offer a potential and ecologically sound alternative to synthetic materials by harnessing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 492–502 Read article
-
Deep Cryogenic Treatment of Copper Chill Plates in Stir Casting of Al6061-Silicon Carbide Composites
Abstract: Aluminum-Silicon Carbide Metal Matrix Composites (Al/SiC MMCs) represent advanced materials created through the integration of aluminum matrices with silicon carbide particle reinforcement. These composites demonstrate superior characteristics compared to conventional aluminum alloys, establishing their relevance across diverse engineering applications. This experimental investigation focuses on developing composites using aluminum as the base matrix while incorporating SiC particles (40-50μm particle size) as reinforcing agents. The reinforcement content was systematically varied from 3 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 116–126 Read article
-
Innovative Design and Implementation of PCD-Based Drawing Dies and Tungsten Carbide Molds for Automotive Fastener Manufacturing
Abstract: This study presents an integrated engineering investigation into the design, optimization, and implementation of advanced tungsten carbide and polycrystalline diamond (PCD) tooling technologies within the cold forging and wire drawing processes at Koobesh Kavir Semnan Company, one of Iran’s leading automotive fastener manufacturers. By combining powder metallurgy principles, material flow simulation, and experimental validation, this research introduces a technological advancement that improves productivity, tool longevity, and cost-efficiency in industrial production. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 16–26 Read article
-
A Technical review on Investigation Of Cutting Conditions On Tool Life And Material Removal Rate In Turning Of T51620 Using Cermet And Tungsten Carbide Insert
Abstract: The performance of turning operation is depend upon the tool life and MRR of the tool material T51620 material is employed in making of dies in different industry. Tungsten carbide is most suitable insert material used for turning of T51620 .but now days industries need higher productivity and includes higher tool life and higher MRR with same parameters so one should compare the tool material with the advance one cermet …
Published in Trends in Mechanical Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 8–17 Read article
-
Enhanced Mechanical and Tribological Performance of Magnesium–Boron Carbide Composites Fabricated via Stir Casting for Lightweight Structural Applications
Abstract: This study investigates the fabrication and evaluation of properties of magnesium (Mg) matrix composites reinforced with boron carbide (B₄C) for lightweight structural applications. Stir casting was employed to incorporate B₄C particles at varying weight fractions (0%, 3%, 6%, and 9%) into the magnesium matrix. The influence of B₄C on density, porosity, hardness, tensile strength, and wear resistance was systematically examined. Theoretical density increased from 1.74 g/cm³ (pure Mg) to 1.88 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 29–39 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Effect of silicon carbide on the mechanical properties of the rice husk, corn cob polymer matrix composites
Abstract: Throughout the world there have been alarming concerns over the use of non renewable resources during manufacturing of goods and associated environmental legislations. Therefore, the use of natural materials and fabrication of composites there from, particularly, development of natural fibre reinforced polymer composites is gaining significant attention. Although natural fibre reinforced composites (NFRCs) show strong application prospects, various materials and processing related challenges needs to be addressed to achieve long-term …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 39–45 Read article
-
Investigation, Fabrication and Testing of Spur Gear Using Composite Material
Abstract: Composite materials constitute one of the favorable, efficacious material zones for tomorrow’s sustainable future through identification of materials with higher strength to weight ratio. A composite material is combination of two or more different materials with varied qualities that work together to create a material that is better than the sum of its parts. Therefore, finding some alternative material for various mechanical applications to accelerate the Indian composite industry is …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 1–8 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Effect of machining parameters on the tool wear in drilling of 3D PF C/C composite
Abstract: Carbon–carbon (C/C) composites are broadly used in aerospace, defence, shipbuilding, chemical, and nuclear industries owing to their high strength-to-weight and stiffness-to-weight ratios. However, they are brittle, anisotropic and non-homogeneous in nature, making them difficult to machine. Incorrect machining parameters can cause defects such as burrs, delamination, and fibre bundles pullout. This paper aims to study the hole surface and tool wear during drilling of 3D pierced fabric (PF) carbon-carbon (C/C) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 269–281 Read article
-
A Comprehensive Review on the Use of Carbide Based Material to Produce Eco-friendly Tiles
Abstract: Changing climatic condition created more discomfortness for the people to reside inside the building. Several elements regarding its behaviour in elevated temperature is still need to be reviewed. A methodical review of the effects of realistic heat exposure is required to untangle the ambiguity of spalling. Decisions on the kind of concrete mix, cooling amenities and building strategies to be used in the erection of a concrete shape can solely …
Published in Journal of Construction Engineering, Technology & Management · Vol. 12, Issue 2, 2022 · pp. 10–13 Read article
-
Experimental Investigation of Boron Carbide Reinforced Al-Mg-Si Alloy Nano Composites by the Stir Casting Method Using Machine Learning Algorithm
Abstract: For the purpose of this experiment, Al-Mg-Si alloys were manufactured with the use of the stir casting process with a metal mold. The alloys had different weight percentages of nano boron carbide, which ranged from 0 to 4% by weight. The intervals between the percentages were 0.5. Following that, the microstructural and mechanical parameters of the as-cast alloy and the nano composites were compared and contrasted according to ASTM Standards …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1766–1779 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article