Search
15 articles for “biodegradable adhesives”
-
Synthesis, Characterization, and Thermogravimetric Analysis of Polylactic Acid-Based Bio-Adhesive for Industrial Applications
Abstract: This study investigated the synthesis, characterization, and thermogravimetric analysis of polylactic acid (PLA)-based bio-adhesives for industrial applications. The adhesive was synthesized using an emulsion polymerization method with varying compositions of PLA and vinyl acetate. The physicochemical, mechanical, and thermal properties of the synthesized adhesives were assessed through pH analysis, viscosity measurement, peel strength evaluation, tack tests, biodegradability investigations, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 39–54 Read article
-
Carboxymethyl Cellulose-Based Spray-Dried Microspheres: Recent Advances and Applications in Targeted Drug Delivery Systems
Abstract: Microspheres are spherical particles ranging from 1 to 1000 μm, made from natural or synthetic polymers and inorganic materials. Their structure allows precise drug delivery, improving targeted release and minimizing off-target effects. Natural polymers such as starch, chitosan, and alginate are favored for their biodegradability, adhesion, and compatibility, enhancing mucosal interaction and residence time. Microspheres are widely used in site-specific drug delivery, gene therapy, and vaccine administration, improving immunogenicity, extending …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 251–268 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Optimizing PLA Filament Production for Enhanced 3D Printing Performance
Abstract: This research explores the optimization of polylactic acid (PLA) filament production to improve its performance in 3D printing applications. PLA is a widely used biodegradable polymer known for its eco-friendliness and ease of processing in additive manufacturing. The study investigates various parameters affecting PLA filament production, including material purity, extrusion temperature, filament diameter consistency, and cooling methods. Furthermore, the research evaluates how these fabrication parameters influence the printability of PLA …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 21–29 Read article
-
Development of Durable Panels from Consumer Clothing and Garment Cutting Waste Textile Materials
Abstract: This paper examines the creation of eco-friendly durable panels developed from recycled textile waste. The primary sources of textile waste are, the used consumer clothing materials and garment cut waste fabric materials. The accumulation of textile waste affects our environment and increases the landfills. In this research, we developed a new process and method to recycle the textile waste and transform them into durable panel, a sustainable alternative to traditional …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 52–63 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Mechanical Property Assessment of Hybrid Composite Laminates Composed of Jute Glass Fibers in Combination with Flax, Hemp, Sisal and Kenaf Fibers Using the Hand Layup Technique
Abstract: The present work compares the properties of various hybrid composite laminates manufactured using the hand layup technique and addresses their production process, based on glass fiber as the exterior layer and natural fibers (flax, hemp, kenaf, jute, and sisal) as interior layers, in an epoxy resin. Five stacking sequences A-GJJJJG, B-GFJJFG, C-GHJJHG, D-GKJJKG, and E-GJSSJG were used to prepare the test specimens. According to ASTM guidelines, experiments were performed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 103–113 Read article
-
Analysis of Physical Properties of Polyethylene Terephthalate Coated Aggregates used in Bituminous Concrete Mixes
Abstract: The main cause of climate change that the world has been facing for several years is burning of plastic waste in open air. To contribute to solution of this problem, an investigation was carried out with utilization of plastic waste in bituminous mixtures used in flexible pavement.With varied amounts of Polyethylene Terephthalate (0%, 6%, 6.5%, 7%, 7.5%, and 8%) of asphalt content, variousdesirable properties of aggregates required for bituminous mix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 206–213 Read article
-
Sustainable Development of Carbon–Sisal Reinforced Polyester Composites through Green Nanotechnology
Abstract: This study presents the sustainable development of carbon–sisal fiber reinforced polyester composites enhanced through green nanotechnology for improved mechanical performance and environmental compatibility. The hybrid composites were fabricated using varying fiber ratios - C1 (70% carbon, 30% sisal), C2 (60% carbon, 40% sisal), and C3 (50% carbon, 50% sisal) - with an optimized addition of 1 wt.% nano-silica (SiO2) synthesized via a green sol–gel route. The tensile, flexural, and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1179–1194 Read article
-
Biomedical Coatings: Surface Engineering for Enhanced Biocompatibility and Performance
Abstract: Biomedical coatings have become essential in modern healthcare, significantly improving the performance, durability, and biocompatibility of medical implants and devices. These coatings serve multiple functions, including reducing infection risks, enhancing osseointegration, promoting tissue integration, and enabling localized drug delivery. Advances in surface engineering have led to the development of innovative coatings with superior properties such as antimicrobial resistance, bioactivity, and controlled biodegradation. Various materials are employed in biomedical coatings, including …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 8–15 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
Thermal and Microstructural Evaluation of Natural-Glass Fiber Hybrid Composites: Sustainable Alternatives to Synthetic Materials
Abstract: The scope of engineering requirements for composite materials, which mix features from several elements engaged in engineering applications to enable greater performance, cannot be adequately understood in this way. The most recent of these materials are hybrid composites, which combine synthetic and natural fibers, particularly glass fibers, and are anticipated to create new, promising materials in terms of their ties to cost, performance, and consistency. From the perspective of their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1275–1285 Read article