Search
33 articles for “bending test”
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Improvement of mechanical properties for PMMA based Denture material
Abstract: Denture material properties can be improved by various fiber addition. The most often used denture materials are polymethyl methacrylate (PMMA) resins; nevertheless, they do not have a high flexural strength (FS). This investigation compared the mechanical characteristics of an injection-molded polyamide. Deflex, an additional injection-molded PMMA base material, SRIvocap, and a typical compression-molded PMMA (Meliodent). The flexural qualities (deflection, bending strength, and bending modulus) of 100 different denture base materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 155–165 Read article
-
Innovative Synthesis Techniques and Comprehensive Mechanical Characterization of Biopolymer-Based Composites for Advanced Applications in Biochemistry and Materials Sciences
Abstract: Biopolymer-based composites have gotten a lot of attention lately because they could be used in biology and materials science in interesting ways. The main goal of this study is to come up with new ways to make composites and then fully characterize their material properties so that they can be used in more advanced ways. During the production step, a new method is used that combines green chemistry ideas with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 119–136 Read article
-
Fused Deposition Modelling-based 3D Printing: A Systematic Literature Review Employing VOS Viewer
Abstract: Fused Deposition Modelling, also known as FDM, has emerged as a major technology in the field of 3D printing. It provides adaptability and cost-effectiveness in the process of materializing intricate designs. This paper intends to conduct a complete bibliometric analysis (BA) of 3D printing based on fused deposition modelling (FDM) in order to comprehend the trend and research field. After extracting data from the Scopus database using the titles, abstracts, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 197–202 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Effect of Chemically Treated Plant Cellulose on Mechanical, Fatigue and Fracture Toughness Behaviour of Polyester Composite
Abstract: In this research study, the effect of chemically treated plant cellulose on the mechanical, fatigue, and fracture toughness behaviour of polyester composites was investigated. Ramie plant cellulose fibers were used as the reinforcing material, and polyester resin was used as the matrix material. Three different chemical treatment processes, namely alkalization, acetylation, and etherification, were used to adapt the superficial chemistry of the fibers and advance their compatibility with the polyester …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 21–29 Read article
-
Integration of Semi-Interpenetrating Polymer Networks and Quantum Dot–Polymer Nanocomposites for Low-Cost, Flexible OLED Display
Abstract: Flexible OLED displays need advanced material systems to integrate capabilities for mechanical flexibility as well as thermal stability and environmental durability at low costs. Semi-interpenetrating polymer networks (SIPNs) combined with quantum dot (QD)-polymer nanocomposites serve to improve OLED performance capabilities. They combine a stable structural design along with a flexible matrix through the matrix capabilities of SIPNs which result in efficient luminescence and pure color output courtesy of CdSe/ZnS QDs …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 919–932 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Comprehensive Study on the Mechanical And Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement technique. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Polymer-Nanowire Hybrid Composites Based on PEDOT: PSS and AgNWs for High-Performance Conductive Films in Flexible Devices
Abstract: The growing demand for flexible photovoltaic and wearable optoelectronic devices has intensified research into polymer-based conductive composites that provide transparency, flexibility, and electrical efficiency. In this work, we report the fabrication and characterization of a hybrid polymer nanocomposite electrode comprising silver nanowires (AgNWs) embedded within a PEDOT:PSS matrix, deposited on flexible polyethylene terephthalate (PET) substrates. The PEDOT:PSS polymer phase, modified with 5 vol% dimethyl sulfoxide (DMSO) and 0.1 vol% Zonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 236–250 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Physico-Mechanical Behavior of Euphorbia Abysinica and Wood Chips Composite
Abstract: In this study, we prepared composite test specimens from Eucalyptus chip particles of sizes 0.5 mm, 1 mm, and 2 mm combined with Euphorbia-Abyssinica fluid at an 80:20 mass ratio. We produced the particleboard under a compression load of 150 KN and kept it in the compression machine for thirty minutes inside the mold. After removing it from the machine, we secured it with C-clamps for twenty-four hours. We covered …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Development of Chilli Pedicle Powder Fiber Reinforced with Palmyra Sprouts for Sustainable Biodegradable Composites and Its Mechanical Characterization
Abstract: The current research study aimed to present the development and mechanical characterization of a novel biodegradable composite material, Chilli Pedicle Powder fiber reinforced with Palmyra sprouts, which might be of significant importance to replace conventionally used synthetic fibers from nature in an eco-friendly way. With rising global needs in sustainable materials in multiple industries, like automotive, construction, and packaging industries, it was required to find an alternative biodegradable source that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 433–441 Read article
-
Design and Development of Fiber Sandwiched Composite Materials for the Improvement of Mechanical Properties
Abstract: This research paper presents the development and mechanical characterization of fiber sandwiched composite materials (FSCM) to address the increasing demand for high-strength, lightweight, and corrosion-resistant materials in advanced engineering sectors such as automotive, aerospace, and transportation industries. Traditional homogeneous materials such as metals, ceramics, and polymers often fail to provide a balanced combination of properties like high tensile strength, low density, toughness, abrasion resistance, and impact resistance needed for modern …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 22–37 Read article
-
A Review on Properties of Natural Fiber Reinforced Composite Materials for Automotive Application
Abstract: The use of composite polymer matrix materials is growing rapidly in automotive, marine and aerospace applications due to their light weight and recyclable properties. In the automotive industry, the use of polymer matrix for interior panels, trims, exterior panels and fender assemblies is rapidly increasing in the 21st century. It also stimulates the use of polymer compounds reinforced by natural fibers. Natural fiber polymer composites are a growing industry due …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 915–922 Read article