Search
34 articles for “batch experiments”
-
Synthesis and Characterization of Bamboo-Supported Nano Zerovalent Iron (NZVI-AB) for Cr(VI) Sequestration
Abstract: Remediation of chromium contaminated sites present both technological and economic challenges, as conventional methods are often too expensive and difficult to operate. In this study, bamboo supported Zero-valent iron (Fe0) nanoparticles were synthesized, characterized, and were tested for removal of Cr(VI). Fe0 nanoparticles were synthesized by the reduction of ferric chloride with avocado polyphenols and characterized by FTIR (Fourier transform infrared) spectroscopy and XRD (X-ray diffraction). Batch experiments were performed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 1–7 Read article
-
Synthesis of Poly(Methyl Methacrylate) Latex Using Batch Emulsion Polymerization Reactor: Experimental and Simulation Study
Abstract: AbstractThe rationale for the present study was to develop Poly(methyl methacrylate) polymer latex, using free radical emulsion polymerization mechanism, in which water acted as the continuous aqueous phase, methyl methacrylate monomer as the dispersed phase, potassium persulfate (KPS) as an initiator and sodium dodecyl sulfate (SDS) as the stabilizing agent. PMMA is a versatile thermoplastic resin, used widely because of its excellent performance in optical and medical field. The characterization …
Published in Journal of Polymer & Composites · Vol. 4, Issue 1, 2016 · pp. 37–44 Read article
-
Experimental Studies on Modified Sequential Batch Reactor Using High Density Poly Ethylene as a Media
Abstract: Dairy industry wastewater is being a challenge to the environment. The effluent from the diary industries contain high amount of sulphate, sulphide, ammonia, chloride, nitrate, oil and grease, etc. To treat dairy waste water many methods were developed by researchers in the last few decades. Modified sequencing batch reactors (MSBRs) process used for different type of wastewater such as municipal wastewater, landfill leachate, dairy wastewater slaughter house, etc. Main operating …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 30–32 Read article
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box- Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites Read article
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box-Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 32–54 Read article
-
Comparative Analyses of Select Microbial Growth Inhibited Rate Models
Abstract: Food waste is a complex substrate comprising of different mixtures of chemical compounds. The growth rate of micro-organism in such environment will experience inhibition. Consequently, the Monod’s model will not be able to describe the growth rate of its bacteria. The Aiba’s, Andrews and the Haldane’s growth rate models that are accounts for growth rate of bacteria with inhibition were compared. To do this, seven different batch experimentations; each with …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 1, 2024 · pp. 16–24 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Study and Analysis of Body Postures Using Ergonomic Assessment Tools in Drilling Operations
Abstract: Ergonomics is one among the major factor that is curiously viewed by the modern world. Musculoskeletal disorder and awkward posture are the two dominant issues in ergonomics. The paper aims at studying and analyzing various musculoskeletal disorders, body postures, and other ergonomic aspects in vertical drilling operation in a laboratory work place using engineering students. Drilling is an operation in which ergonomic issues arise. Drilling is the most common operation …
Published in Journal of Industrial Safety Engineering · Vol. 2, Issue 1, 2015 · pp. 28–42 Read article
-
Synthesis and Characterization of Green Synthesized Iron Nano Particle (GInP) Using Eucalyptus globulus for Lead Removal
Abstract: The application of green synthesized iron nanoparticle for the removal of lead is researched in this study. The FT-IR and XRD results reveal that a nanoparticle with 80 nm size could be synthesized using Eucalyptus globulus leaf extract. The specific surface area of the nanoparticle was found to be 59 m2/g. The lead removal capability of the green synthesized iron nanoparticle (GInP) was investigated for lead concentration ranging from 50–250 …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 20–25 Read article
-
Lead Ion Removal from Water Using Fava Beans Pod-Derived Phytoadsorbents: A Green Approach
Abstract: The contamination of natural ecosystems—particularly water bodies—with harmful chemical substances poses a serious environmental threat on a global scale. Among these contaminants, toxic heavy metals such as lead, arsenic, cadmium, and mercury are especially concerning due to their non-biodegradable nature and ability to accumulate in living organisms. These metals can enter the human body through the food chain, even at trace levels, leading to various severe health issues, including neurological, …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 53–58 Read article
-
Green Fabrication of Glutaraldehyde-Crosslinked Chitosan/PVA Biocomposite for Heavy Metal Removal from Wastewater
Abstract: Chitosan (CS) and Polyvinyl alcohol (PVA) are polymers that possess biodegradable, biocompatible, and non-toxic properties, making them suitable for wastewater treatment applications. The primary objective of this research is to chemically modify chitosan in a novel manner to enhance its ability to remove hexavalent chromium Cr(VI) from aqueous solutions. In this study, a composite material was synthesized by crosslinking PVA and CS with glutaraldehyde (GA), resulting in the formation of …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 59–83 Read article
-
Polymer Composite-Supported Jackfruit Peel Adsorbent for Enhanced Copper (II) Removal from Wastewater: Batch Equilibrium and Isotherm Analysis
Abstract: The increasing concern of disposal of copper-containing effluents into the environment has led to heightened interest in designing cost-effective, eco-friendly and scalable adsorbent systems. Traditional metals and synthetically engineered sorbents prove to be effective; however, these systems are energy intensive. Agricultural residues entrapped in polymer composite systems constitute an economically feasible solution to this environmental challenge. This work reports on the design, characterization and performance evaluation of an economical adsorbent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 375–390 Read article
-
Colour Removal from Effluents Using Micromaterials
Abstract: In this study, the ability of Micromaterials to adsorb color from an aqueous solution was investigated by using flocculants and activated carbon prepared from Rice Bran, an agricultural by-product, and batch mode adsorption experiments were conducted. The influence of various factors such as initial concentration (20, 40, 60, 80 mg/L), contact time, pH (4.0-9.0), and dosage on the adsorption capacity was investigated and optimal experimental conditions were ascertained. Adsorption data …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 2, Issue 1-3, 2012 · pp. 1–8 Read article
-
Empirical Relation to Predict Essential Oil Yield in Conventional Distillation System
Abstract: Peppermint is medicinal herb, and its extracts (essential oils) are of great importance because they are used in pharmaceutical, food, and cosmetic items. Moreover, peppermint oil is also used as anticancer, anti-bacterial, anti-viral, spasmodic, anti-diabetic, ulcer healing, anti-obesity, etc. Steam distillation method is used to extract essential oil from peppermint. Boiler, extraction unit, condenser and Florentine flask are the main components of steam distillation system. The objective of present study …
Published in Journal of Polymer & Composites Read article
-
An Empirical Study of Hyperparameter Impact on Deep Learning Models for Cardamom Leaf Disease Classification
Abstract: Recent advancements in deep learning models like convolutional neural networks and self- attention mechanisms have achieved great success in the field of plant disease classification. This study investigates the efficacy of two pre-trained models, ConvNeXT-Tiny and Swin Transformer-Tiny, for leaf disease classification in cardamom using a publicly available dataset constituting three categories of leaves, namely Healthy, Colletotrichum Blight and Phyllosticta Leaf Spot. The effectiveness of the models highly depends on …
Published in Current Trends in Information Technology · Vol. 15, Issue 3, 2025 · pp. 48–60 Read article
-
An Experimental Investigation on the Forming Force in Asymmetric Parts Formed using Single Point Incremental Forming
Abstract: Single point incremental forming (SPIF) is used to form small batch production of different shapes of parts. Present study is focused on investigation of part asymmetry on the forming behavior of the parts formed using SPIF process. Wall angle as an asymmetry is considered for forming of the pyramidal frustrum. The wall angle is varied from 50 degree to 65 degree and subsequent forming forces are recorded using force dynamometer. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 18–31 Read article
-
A Review Study on CPU-Optimized Parameter-Efficient Fine-Tuning for Large Language Models to Increase Accuracy Using LoRA
Abstract: The fast proliferation of large language models (LLMs) has increased the need to optimize the process of fine-tuning, but the existing workflows that require a graphics processing unit (GPU) are still expensive, intensive, and unavailable to most researchers. This paper is driven by the desire to have a more cost-efficient and democratized version by examining a CPU-efficient implementation of parameter-efficient fine-tuning (PEFT) based on low-rank adaptation (LoRA). The major purpose …
Published in Recent Trends in Parallel Computing · Vol. 13, Issue 1, 2026 · pp. 32–38 Read article
-
Effect of Sodium Alginate Concentration on Size of Yeast Immobilized Particle and on Production of Bio-ethanol in a Packed-Bed Fermenter
Abstract: Biofuels are important because they replace the petroleum fuels or fossil fuels and especially ethanol and butanol contribute greatly to the mitigation of greenhouse gases emission, provide clean and sustainable energy source and reduce the consumption of crude oil. Current ethanol production processes using agricultural crops such as sugarcane and corn are well known, i.e., biochemical pathway and thermo-chemical pathway. However, in the biochemical pathway, the reactors used for fermentation …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 2, Issue 1-3, 2012 · pp. 9–14 Read article
-
Formulation and development of Lamivudine Nanoemulsion by using Emulsifying Polymers and It’s Evaluation
Abstract: Nanoemulsion is a novel approach to medicine delivery that helps to increase the bioavailability of drugs that aren’t particularly soluble in water. In this research work, nanoemulsion of Lamivudine was formulated by using polymers such as SPAN 80, TWEEN 80 and Whey protein concentrate with the help of Ultrasonication technology. The formulation was optimized. It was evaluated by assessing pH, viscosity, turbidity, in vitro franz diffusion study, particle size distribution, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 22–35 Read article
-
Polymeric Microfluidic Chips for Rapid Point-of-Care Diagnostic Testing
Abstract: Polymeric microfluidic chips have emerged as promising platforms for rapid point-of-care (POC) diagnostic testing by integrating sample preparation, fluid manipulation, biochemical reactions, and signal detection within compact and potentially low-cost devices. Their compatibility with materials such as polydimethylsiloxane (PDMS), polymethyl methacrylate (PMMA), cyclic olefin copolymer (COC), polystyrene (PS), polycarbonate (PC), and polymer–paper composites provide considerable flexibility in device design and manufacturing. Advances in soft lithography, injection moulding, hot embossing, laser …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article