Search
175 articles for “alloy”
-
Enhanced Synthesis Methods and Comprehensive Material Response Analysis in Alloy-Infused Nanocomposites
Abstract: This study looks into the most advanced ways to make alloy-infused nanocomposites and how they react to different materials. It focuses on how these nanocomposites can be used to process and make plastics and composites. A lot of people are interested in alloy-infused nanocomposites because they have better mechanical, thermal, and electrical qualities than regular composites. The goal of this study is to improve the methods used for making nanocomposites …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 175–191 Read article
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article
-
Exploring the Applications and Advancements of Copper and Copper Alloys in Modern Manufacturing Processes
Abstract: For industrial uses, copper represents one of the greatest technical materials offered. This review paper discusses on the history of copper and copper alloys, salient features of wrought and cast copper alloys, physical and chemical characteristics of copper alloys, classification of copper alloys, design for manufacturing of copper alloys, mechanical properties of cast copper alloys, role of lead in copper alloys and applications of copper alloys in various engineering industries. …
Published in International Journal of Industrial and Product Design Engineering · Vol. 1, Issue 2, 2023 · pp. 1–9 Read article
-
A Comprehensive Study of Radial Load Fluctuation on Alloy Wheels for Electric Vehicles
Abstract: Electric Vehicle’s alloy wheels are designed to allow for better heat dissipation. Manufacturers carry out many tests of a wheel to be sure, that the wheel will fit for safety reason as also their comfortability level is even bigger. Therefore, a specific design was selected for which the simulations of alloy wheel were performed under real loading conditions. The main objective of this research is to analyze the effects of …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 2, 2024 · pp. 47–56 Read article
-
An Experimental Investigation on Surface Roughness of Laser Beam Machining of Aluminium Alloy
Abstract: Laser beam machining (LBM) is a cutting-edge technique widely utilized for precision machining of advanced materials. This experimental investigation focuses on the surface roughness of aluminum alloy (Al 6061) during LBM. The study systematically examines the impact of process parameters such as laser power, cutting speed, and gas pressure on surface roughness (Ra). The significance of surface roughness in determining the quality and functionality of machined components is emphasized. The …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 82–104 Read article
-
Effects of Nano B4C Addition on the Solidification Behavior of Al-2219 Alloy Composites
Abstract: The inclusion of nano B4C particulates in Al-2219-Nano B4C alloy was investigated to understand their impact on hardness and wear characteristics. 500 nm-sized nano B4C particulates are used as reinforcements for structures in the Al2219 alloy matrix. The nanocomposites were fabricated using the two-stage liquid stir melt method with varying weight percentages (2, 4, 6, and 8 wt. %) of Nano B4C in the Al-2219 alloy matrix. Renewable energy dispersive …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 31–38 Read article
-
Development and Characterization of Pseudo-Elastic Ternary Cu-Al-Be Shape Memory Alloy and Its Scope as Shape Memory Hybrid Composites
Abstract: This research investigated the potential of the Cu-11.95Al-0.51Be shape memory alloy (SMA) for vibration damping applications. This specific composition of the alloy was selected to ensure the presence of the austenite phase (ß-phase) and to evaluate the pseudo-elastic (SE) behavior. This research explores the design, fabrication, and characterization of a pseudo-elastic ternary alloy. The key parameters examined in this study were the alloy phase and pseudo-elastic behavior. Other important factors, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 370–385 Read article
-
A Survey on Hydrogen Storage System using Composite Material and its Alloys
Abstract: The transition to a carbon-neutral energy landscape hinges on the ability to store hydrogen safely, densely, and reversibly. While high-pressure tanks and cryogenic vessels dominate today’s infrastructure, solid-state storage in metallic alloys offers a compelling alternative by combining high gravimetric capacity with intrinsic safety to form a composite material. This work presents a systematic investigation of a family of reversible hydrogen-absorbing composite material alloys—principally Mg-based intermetallics (Mg₂Ni, MgFeMn) and TiV-based …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 28, Issue 2, 2025 Read article
-
Advanced Quantitative Analysis of Dynamic Recovery during Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls, and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
Abstract: Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical properties with Zinc. Implants, due to their intricate geometries are difficult to fabricate by conventional manufacturing techniques. Therefore, they are usually fabricated by Additive manufacturing and Powder metallurgy techniques. In the present work, Zinc, Magnesium, manganese and titanium are alloyed using powder metallurgy technique. Vickers micro-hardness, UTM, Zeiss microscopy and Corrosion testing using …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 1–13 Read article
-
Optimization of Process Parameters for Cu90Ni10 Alloy Processed by Wire Arc Additive Manufacturing (WAAM) Using an L9 Orthogonal Array
Abstract: Abstract Wire Arc Additive Manufacturing (WAAM) has gained significant attention in recent years as a promising technique for producing complex metallic components. This study focuses on the processing of Cu90Ni10 alloy using WAAM and employs an L9 orthogonal array to optimize the mechanical properties of the resulting components. Cu90Ni10 alloy is known for its excellent corrosion resistance and electrical conductivity, making it a critical material in various industries, including aerospace …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 292–301 Read article
-
An Overview of The Impact of Reinforcement on Mechanical and Thermal Characteristics of Aluminum Alloy Composites
Abstract: Aluminum is utilized extensively in the domains of aerospace, electronic technology, electric module packing, automotive body structure, solar and wind energy management, and so on because of its better potential for weight reduction. Strength of aluminum is very less so application is limited where high strength is needed. Aluminum alloy which have greater potential for weight reduction as well as high strength to weight ratio have ability to overcome these …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 240–249 Read article
-
Experimental Investigation of Aluminum Alloy 8010 by Friction Stir Welding
Abstract: A solid state welding method called friction stir welding (FSW) is used to fuse metals and alloys that are challenging to fuse using traditional fusion welding. The effects of tool pin and shoulder diameter on joining the aluminum alloy Al 8010 were examined in this study. The basis material for combining single butt-welded joints is a plate with a thickness of 6 mm. The welding was carried out on the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 14–19 Read article
-
Superplasticity Behavior of Aluminium Alloys Through FSP: A Review
Abstract: Friction Stir Processing (FSP), an advanced modification of Friction Stir Welding (FSW), has emerged as a highly effective technique for fabricating surface composites with superior mechanical and metallurgical properties. FSP enhances the microstructure and superplastic behavior of materials, particularly aluminium alloys, by subjecting them to high strain rates at relatively low temperatures. This review paper critically examines the development and optimization of FSP for aluminium alloys, emphasizing key factors such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 65–77 Read article
-
Experimental Investigation of Boron Carbide Reinforced Al-Mg-Si Alloy Nano Composites by the Stir Casting Method Using Machine Learning Algorithm
Abstract: For the purpose of this experiment, Al-Mg-Si alloys were manufactured with the use of the stir casting process with a metal mold. The alloys had different weight percentages of nano boron carbide, which ranged from 0 to 4% by weight. The intervals between the percentages were 0.5. Following that, the microstructural and mechanical parameters of the as-cast alloy and the nano composites were compared and contrasted according to ASTM Standards …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1766–1779 Read article
-
Electroplating and Corrosion Properties of Binary and Ternary Zinc Alloys with Nickel, Cobalt and Iron
Abstract: The anti-corrosive three binary (Zn-Ni, Zn-Co, Zn-Fe) and two ternary (Zn-Ni-Co, Zn-Co-Fe) alloy coating films on mild steel from acid chloride bath using sulphanilic acid and gelatin as additives for the electroplating technique. The normal Hull cell method was used to optimize the bath compositions, temperature and pH of the bath solutions for coating performance against corrosion. The cause of current density (CD) on metal weight percentage (M = Ni, …
Published in Journal of Thin Films, Coating Science Technology & Application Read article
-
Influence of Aspect Ratio on the Mechanical and Tribological Properties of Vertical Centrifugal Cast Aluminium Silicon Alloy
Abstract: To get a sound cast of precise shape and size in the vertical centrifugal casting process, the flow behavior of the melt and process parameters such as aspect ratio of the mould, rotating speed, volume fraction, etc. must be optimized. The optimal parameters of the vertical centrifugal casting process derived from past cold modelling studies in casting of Al-12%Si alloy are investigated in this paper. Casts were obtained using 7 …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 104–111 Read article
-
Parametric Optimization of Biocompatible Ti6AL4V Alloy on Selective Laser Melting for Enhanced Structural Support and Reduced Stress Shielding
Abstract: The Selective Laser Melting technique is widely employed in the production of complexly shaped end products for a range of industries, including biomedical, aerospace, automotive, and defence. SLM is a complicated manufacturing process since a lot of factors influence the characteristics of the items that are printed using it. The SLM printing of fully dense parts is becoming more and more popular for various high-end applications. Because of their biocompatibility …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 143–156 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Study of Electrochemical and Mechanical Properties of Graphene/HAp Composite Coating on Ti-13Nb-13Zr Alloy via Electrophoretic Deposition for Biomedical Application
Abstract: Titanium-13niobium-13zirconium alloy has widespread potential in biomedical applications due to its high degree of biocompatibility, favourable mechanical properties, high corrosion resistance, and high possibility of osseointegration. The surface was improved by electrophoretic deposition method using hydroxyapatite and graphene (5 g nanoHAp) (5 g nanoHAp+0.06 nanoGr) and suspended in ethanol solution at different conditions of time (1, 3, and 7 minutes) and voltage (50, 70, and 100 V). The effect of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 91–106 Read article