Search
79 articles for “adhesive properties”
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Characterization of Antibacterial and Biofilm Inhibition in Tin and Zinc Oxide Nanoparticle-Doped Orthodontic Composites
Abstract: Background: This study investigated the antibacterial effectiveness of orthodontic adhesive enhanced with stannous oxide (SnO₂) nanoparticles against Lactobacillus acidophilus and Streptococcus mutans, in comparison to traditional adhesives without nanoparticle infusion. Methods: A modified orthodontic adhesive was prepared by incorporating 1% w/w of tin dioxide and zinc oxide nanoparticles (SnO₂ + ZnO₂ NPs) into Transbond XT. This nanoparticle-enhanced composite was used to fabricate discs for assessing antibacterial activity against Lactobacillus acidophilus …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 230–239 Read article
-
Mechanical Characterization of Adhesive in Lap Joint Under Tensile Load
Abstract: The present work gives details of adhesive characterization in lap joints under quasi static tensile failure load. Rivets are major threat for an aircraft structure because of high stress concentration at lesser area ease to failure and also causes drag in aerodynamic perspective. Researchers are searching for a different method to avoid the stress concentrations in lesser area. The use of adhesives instead of rivets is most feasible solution for …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 96–103 Read article
-
Impact of Chemical Conditioning on the Mechanical Performance of Pine Fibre-Reinforced Composites
Abstract: The study examines the effects of treatments like alkaline, silane, and acetylation on enhancing the mechanical strength and reducing water absorption in pine fiber-reinforced composites. Natural fibres, while eco-friendly and sustainable, present challenges in fibre-matrix adhesion due to their hydrophilic nature, impacting composite performance. Chemical treatments were employed to modify fibre surface characteristics, enhance interfacial bonding, and thereby improve mechanical properties. Silane-treated composites exhibited the highest tensile and flexural strengths, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 140–150 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article
-
Determining the Best Long-Term Luting Cement for Implant Retained Prosthesis Based on Bond Strength and Surface Integrity
Abstract: Implant-retained prostheses play a crucial role in modern dentistry, necessitating reliable luting cements to ensure their longevity and functionality. This study aimed to determine the best long-term luting cement for implant-retained prostheses based on bond strength and surface integrity. The success of implant-retained prostheses relies heavily on the quality of the luting cement used to secure the restoration to the implant abutment. The investigation will employ a series of standardized …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 119–129 Read article
-
Crystalline and Polymeric Interactions in Multi- layered Bulletproof Glass: A Study of Ballistic Resistance and Structural Integrity
Abstract: Bulletproof glass is engineered to withstand high-impact projectiles, offering a critical line of defense in various industries such as banking, military, and armored vehicles. This study explores the structural composition, energy absorption mechanisms, and performance characteristics of bulletproof glass when exposed to ballistic threats. The glass consists of layered constructions, often involving polycarbonate and adhesive interfaces such as polyvinyl butyral, which enhance its energy absorption and resistance to projectiles. The …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 10–17 Read article
-
Polymer Matrix Characterization and Interfacial Engineering in Bamboo/Sisal/Chopped Mat Hybrid Fiber Composites
Abstract: The present investigation focuses on the characterization of polymer matrices and the interfacial behavior of bamboo, sisal, and chopped strand mat (CSM) fiber-reinforced epoxy composites. The work aims to understand how natural fibers influence the curing, thermal, and adhesion properties of hybrid composite systems. Experimental analyses were carried out using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) to evaluate curing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 123–135 Read article
-
Heterocyclic Compounds in Thin Film Coatings: A Review on Anticorrosion and Antimicrobial Properties.
Abstract: Heterocyclic compounds have gained significant attention in thin film coatings due to their exceptional chemical versatility and functional properties. These compounds, characterized by the presence of heteroatoms in their ring structures, play a crucial role in enhancing the anticorrosion and antimicrobial performance of protective coatings. This review explores the recent advancements in the application of heterocyclic compounds for corrosion resistance and microbial inhibition, emphasizing their mechanisms of action, effectiveness, and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 16–21 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Determination of Compatibility of Polymer Systems and Study of Chemical Properties of their Mixtures
Abstract: We have obtained mechanical strength of materials as a result not by synthesizing new polymers, but by using industrial polymers. We have developed a technology for obtaining new composite materials based on industrial multi-tonnage polymers of high-strength polyethylene (HSPE), polyvinyl chloride (PVC), polyurethane thermoplastic elastomer (DUTEP), butyl rubber (BR), chlorocarboxylate polyethylene (CCPE), ethylene propylene rubber (EPR). To obtain a composition from these polymers, their mixture compatibility was first determined using …
Published in International Journal of Cheminformatics · Vol. 4, Issue 1, 2026 · pp. 17–29 Read article
-
Synthesis, Characterization, and Thermogravimetric Analysis of Polylactic Acid-Based Bio-Adhesive for Industrial Applications
Abstract: This study investigated the synthesis, characterization, and thermogravimetric analysis of polylactic acid (PLA)-based bio-adhesives for industrial applications. The adhesive was synthesized using an emulsion polymerization method with varying compositions of PLA and vinyl acetate. The physicochemical, mechanical, and thermal properties of the synthesized adhesives were assessed through pH analysis, viscosity measurement, peel strength evaluation, tack tests, biodegradability investigations, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 39–54 Read article
-
Advanced Fiber-Reinforced Polymer Composites: Processing, Nano-Modified Adhesive Technologies, Interfacial Engineering, Durability, and Structural Applications—A Comprehensive Review
Abstract: Fiber reinforced polymer (FRP) composites are considered to be one of the most universal categories of advanced engineering materials owing to their unique properties such as outstanding strength-to-weight ratio, corrosion resistance, fatigue durability, and wide opportunities for design. Innovations in the fields of fiber reinforcement, polymer matrix system, composite manufacturing technologies, and nano-modified adhesives technology have greatly extended the range of applications of this type of materials in aerospace, automotive, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 980–990 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Sustainable Green Solvents: Ionic Liquid-Based Hydrogels
Abstract: Green solvents have been widely used in a wide range of applications, such as catalysis, separation sciences, energy storage and pharmaceutical applications. The main ingredient in the collection of the environmentally benign reagents is ionic liquids (ILs). Ionic liquid-based hydrogels are being used in the biological sciences and medicinal chemistry fields because of their excellent biocompatibility and biosafety features. The versatility of ionic liquids is great, as they can be …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1263–1274 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article
-
Analysis of Physical Properties of Polyethylene Terephthalate Coated Aggregates used in Bituminous Concrete Mixes
Abstract: The main cause of climate change that the world has been facing for several years is burning of plastic waste in open air. To contribute to solution of this problem, an investigation was carried out with utilization of plastic waste in bituminous mixtures used in flexible pavement.With varied amounts of Polyethylene Terephthalate (0%, 6%, 6.5%, 7%, 7.5%, and 8%) of asphalt content, variousdesirable properties of aggregates required for bituminous mix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 206–213 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article