Search
22 articles for “X-ray density”
-
Structural, Mechanical, Electrical and Magnetic Properties of Mn–Zn Substituted Ca-hexaferrites
Abstract: In the present investigation, the samples with chemical composition Ca(CoTi)0.5(MnZn)x/2Fe11–xO19 with (x = 0 to 1.0) have been synthesized using perfect stoichiometric proportions of reacting oxides by standard ceramic technique. The pellets of 15 mm diameter were prepared and sintered at 1313 K in air atmosphere for 106 h and characterized by using XRD and SEM. XRD studies of the samples showed hexagonal magnetoplumbite (M) structure with unit cell dimensions …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 99–111 Read article
-
Lithological Characterization and Reservoir Characteristics by Computerized Tomography Assisted Micro Density Log of the Rock
Abstract: Lithological characterization of the unconsolidated rock from heavy oil field has been attempted using X-ray computerized tomography imagine techniques. A micro density log is generated to obtain the hidden information of such variations along the depth at microlevel, which normally is not available through conventional log. Useful exploratory leads have been obtained through characterization of the nature of reservoir using simple petro-physical techniques on conventional cores by defining reservoir grade, …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 9–11 Read article
-
DentiDetect: Dental Diagnosis Powered by Deep Learning
Abstract: Dental X-rays play a crucial role in modern dentistry, enabling dentists to detect cavities, bone loss, and other hidden dental issues that are not easily visible during a routine examination. X-rays offer a clear picture of teeth, bones, and nearby tissues, enabling early identification of issues. This helps create more efficient treatment strategies and improves patient outcomes. Three commonly used types of X-rays include bitewing, periapical, and panoramic. Bitewing X-rays …
Published in Research and Reviews: A Journal of Dentistry · Vol. 15, Issue 3, 2024 · pp. 21–26 Read article
-
Recent Development to Track Contraband using Muon
Abstract: The muon is one of nature’s fundamental particles discovered in 1937 by Carl Anderson. A muon is an elementary subatomic particle similar to electron, but with a mass approximately 207 times greater and, sometimes it is called as a “heavy electron”. Muons are generated naturally when cosmic rays collide with atoms in earth’s upper atmosphere and, then raining down all the times upon the surface of earth. Muons can be …
Published in International Journal of Universe · Vol. 2, Issue 1, 2026 · pp. 23–34 Read article
-
Development and Characterization of Rubber Composites using E-Waste Residue as Functional Filler
Abstract: In the present study, residue generated during the recycling of end-of-life printed circuit boards (PCBs) was utilized as a functional filler in natural rubber to fabricate eco-friendly composites using mixing and molding techniques. Chemical analysis of the residue revealed the presence of several metals, including copper, iron, lead, tin, and zinc. The presence of these metals highlights the need for proper recycling and safe management of PCB residues, as their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 512–523 Read article
-
Synthesis of PANI/RGO/NiCrO Nanocomposite Material for Charge Storage Application
Abstract: PANI/RGO/NiCrO nanocomposite is synthesized by chemical oxidative polymerization of aniline and Nickel-Chromium Oxide (NiCrO). The prepared PANI/RGO/NiCrO nanocomposite exhibited high specific capacitance of 800 F/g at the scan rate of 5 mV/s, high power density of 1399.44 Wkg-1 and high energy density of 70 Whkg-1. The as-prepared polymer nanocomposites were characterized by X-ray diffraction (XRD) to study crystallinity, Fourier transform infrared spectroscopy (FTIR) to know the functional groups, Transmission electron …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 89–99 Read article
-
Synthesis and Characterization of Al-Mg-Si Alloy based Hybrid Composite Reinforced with SiC and Graphite
Abstract: The present work is carried out to investigate the mechanical properties of Al-Mg-Si alloy matrix based hybrid metal matrix composites (MMCs) using stir casting method owing to its popularity and large scale productions. SiC and graphite reinforcements were added each with 1%, 2%, 3% and 4% respectively to fabricate four composites specimens. X-ray diffractometer and scanning electron microscope were used for phase identification and microstructure characterization (SEM). Density, hardness, compressive …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 9–19 Read article
-
Geotechnical Influence Factors in Empirical Design of Highway Pavement: The A123 Ilorin – Lokoja Highway, Nigeria Case Studies
Abstract: Site investigation and application of geological and geotechnical influence factors on the highway were investigated. Method involved field sampling, geotechnical laboratory and x-ray diffraction analysis and use of SRTM extracted slope and drainage parameters; and their integration in a GIS based multi-criteria decision analysis to derive a subgrade suitability map as a design tool. The suitability criteria classified the highway into four (4) design sections. Section one for very low …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 53–70 Read article
-
STUDIES ON MECHANICAL, THERMAL AND PERMEATION PROPERTIES OF HDPE (BLOW GRADE) WITH MICROSILICA CLAY
Abstract: HDPE is widely used in container applications. The mechanical properties and barrier properties can be further improved by the addition of reinforcements like nanoclays. But, however the cost of nanoclays are higher about Rs.5000 – 6000/kg whereas micro silica cost is economical about Rs.450-1000/kg. Hence we used micro silica of 270nm particle size in this project with HDPE blow grade. HDPE (High density polyethylene) was melt blended with micro silica …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 41–53 Read article
-
Synthesis and Characterization of Forsterite Incorporated HDPE Composites for Microwave Substrate Application
Abstract: High Density Polyethylene (HDPE) combined with dispersed forsterite (Mg₂SiO₄) powder was utilized to fabricate polymer matrix composites (PMCs) aimed at high-frequency microwave substrate applications. Forsterite powders were synthesized using the mixed oxide method, and their phase purity was confirmed by X-ray diffraction (XRD) analysis. The dispersion and morphology of the ceramic filler within the HDPE matrix were examined through Scanning Electron Microscopy (SEM), ensuring a homogeneous distribution essential for optimal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 109–120 Read article
-
Substitution of La3+ in Cu0.5Co0.5 LaxFe2-x O4 (x=0.02, 0.06) spinel ferrites improves the structural and dielectric Properties
Abstract: Nanosized Spinel ferrites with composition Cu0.5Co0.5 LaxFe2-x O4 (x=0.2, 0.6) synthesized by Sol-Gel auto Combustion method. The prepared sample was calcinated at 8000c for 4 hours. The substitution of La3+ effects the structural parameters, which is characterized by X-ray diffraction (XRD). The X-rd analysis shows that the crystallite size is 34.609 nm for 0.02 and 38.994 nm for 0.06 was calculated by using Debye-Scherrer’s formula. dislocation density shows at value …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 45–48 Read article
-
Electrochemical Exfoliation of Graphene Oxide (GO) and Thermally Reduced Graphene Oxide (TrGO) Using Ecofriendly Reducing Agent as Cow Urine
Abstract: The Graphene oxide (GO), the reduced form of GO i.e. (rGO) with thermally reduced graphene oxide (TrGO), have concerned significant interest in various fields with their exceptional properties. We investigate the electrochemical exfoliation processes of GO and rGO to understand their structural and electrochemical behavior of GO and TrGO through various characterization techniques. The electrochemical exfoliation method offers a versatile and scalable approach for the mass fabrication of the materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 89–100 Read article
-
Screening of Bone Mineral Density, Serum Calcium and Vitamin D Level in Hyperthyroid Females of North India
Abstract: Introduction: Osteoporosis is a disease which plays a role in causing fracture especially in females. Hormonal dysfunction may be one of the possible causes of osteoporosis. Hyperthyroidism has been known to increase the risk of fracture especially in women both pre- and postmenopausal. The relation between hyperthyroidism and bone mineral density (BMD) is still unclear. Therefore, the present study was carried out to assess the effects of hyperthyroidism on long …
Published in Research and Reviews: A Journal of Health Professions · Vol. 8, Issue 2, 2018 · pp. 49–56 Read article
-
Synthesis, spectroscopic, crystal structure, Hirshfeld surface, computational, and biological investigations on Isophorone derivatives: 3-(3,4-dimethoxystyryl)-5,5-dimethylcyclohex-2-en-1-one
Abstract: FT-IR, 1H NMR, and 13C NMR spectroscopy were among the spectroscopic methods used to synthesize and analyze 3-(3,4-dimethoxystyryl)-5,5-dimethylcyclohex-2-en-1-one, a new isophorone derivative. Single-crystal X-ray diffraction (SCXRD) was used to determine the crystal structure, which showed that the molecule crystallizes in a monoclinic system (space group P121/c1) with packing configurations and intermolecular interactions. To learn more about the non-covalent interactions influencing the crystal packing, Hirshfeld surface analysis was used. In order …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 51–69 Read article
-
Influence of Bi2O3 on Physical, Optical and gamma radiation Properties of BaO-Bi2O3-B2O3-CuO and BaO-Bi2O3-B2O3-Fe2O3 glasses
Abstract: In this present work glasses with chemical composition 30BaO-XBi2O3-(69-X)B2O3-1CuO and 30BaO-XBi2O3-(69-X)B2O3-1Fe2O3 (X = 0, 5, 10, 15, 20 and 25 mole%) have been prepared and labeled as BBBC and BBBF series, respectively. Traditional quenching method was employed for making these samples. XRD diffractograms confirmed that the materials were amorphous. Physical, optical and structural properties were studied with the influence of Bi2O3 concentration. The density of both BBBC and BBBF series …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 20–31 Read article
-
California Bearing Ratio and Young’s Modulus Behavior of Clinker Stabilized Fly Ash-Mine Overburden Mixes
Abstract: Fly ash is a major byproduct of coal combustion. Fly ash often causes disposal problems and environmental pollution. This paper presents detailed laboratory investigation carried out on clinker stabilized fly ash-mine overburden mixes to find out its suitability for sub-base of mine haul road pavements. Proctor compaction test, Unconfined Compressive Strength (UCS) test, California Bearing Ratio (CBR) Test, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX) were conducted …
Published in Recent Trends in Civil Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 1–10 Read article
-
Influence of B2O3 and Li2O on Physical, Thermal and Spectroscopic properties of Bi2O3-B2O3-CdO-Li2O glass system
Abstract: ABSTRACT Bismuth Borate based glasses with compositions BiBCL: 40Bi2O3-(40-X) B2O3-20CdO-XLi2O where x=5,10,15,20,25 mol% were prepared by conventional melt quenching technique. X-ray diffraction (XRD), differential thermal analysis (DTA), UV-VIS absorption spectroscopy, Fourier transform-infrared (FTIR), and Raman spectroscopies were used to analyse the synthesized samples. Through XRD and SEM studies, the synthesized glasses amorphous nature was confirmed. To evaluate the physical and structural characteristics of the glasses, calculations were made for the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 51–62 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
A Comparative Study of the Structure-Property Relationships in CAD/CAM Milled vs. 3D-Printed High-Performance Polymers: Impact of Molecular Orientation on Abrasive Wear
Abstract: Background: The transition from subtractive to additive manufacturing in prosthetic dentistry has introduced significant variations in the macromolecular architecture of high-performance polymers. While CAD/CAM milling utilizes high-density, industrially polymerized blocks, 3D printing (Additive Manufacturing) relies on layer-by-layer deposition, which may induce anisotropic molecular orientation. This retrospective study investigates how these distinct manufacturing "thermal histories" influence the long-term abrasive wear resistance of PEEK and PEKK restorations.Materials and Methods: Data were retrospectively …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Dye Sensitized Solar Cells Based on Extracted Natural Dyes and Synthetic Dyes with Nanocomposite Material
Abstract: Producing dye sensitised solar cells in their original colours required a number of different techniques. Plants and berries were used to extract these dyes. The DSSCs were manufactured by recycling the old dyes. It was clear that the efficiency of the power conversion was deteriorating. TiO2 mesoporous films' potential applications were also studied. This study employed electrochemical impedance spectroscopy to examine the interactions of natural dyes with TiO2. Bi2O3 nanoparticles …
Published in Journal of Polymer & Composites Read article