Search
42 articles for “Volume fraction”
-
Tensile and Flexural Strength Quantification of Basalt-Reinforced Epoxy Composites Fabricated via Vacuum-Assisted Resin Transfer Molding at Varied Fiber Volume Fractions Description
Abstract: Fiber-reinforced polymer composites have been identified to possess excellent properties that render them very suitable in the aerospace, automotive, marine and renewable energy sectors. However, for the industrially scalable vacuum-assisted resin transfer molding (VARTM) process, optimization of mechanical properties of basalt epoxy composites must be achieved systematically, which means that the effect of the fibre volume fraction(VF) on the mechanical properties of the composite needs to be quantified for different …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Enhancing Performance of Hybrid Natural Fiber Reinforced Polymer: Insights into Processing, Characterization and Machining
Abstract: Natural fibre reinforced polymer composites (N-FRP) have gained popularity in recent years as an alternative to regular polymer composites, owing to growing environmental concerns. Natural fibers are becoming increasingly popular due to their outstanding properties such as flexibility, strength, compatibility with living creatures, and impact resistance. A notable application of natural fibers is in the medical industry, with the goal of producing cost-effective, sustainable, and long-lasting products. Combining different fibers …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 139–153 Read article
-
Evaluation of Fly Ash/ZrO2 Reinforced AZ91E Hybrid Composites Based on Wear and Friction Characteristics
Abstract: In the current study the compo-casting Al alloy MMCs' wear resistance was examined under a variety of abrasive circumstances, including coefficient friction, wear rate and it’s sliding distance. The AZ91E matrix composite was made by the liquid metallurgy process and reinforced with aluminum plated zirconium dioxide (ZrO2) particles. Designers examined the characteristics of matrix alloys along with created composites. friction and wear from dry sliding experiments had been performed on …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 324–338 Read article
-
Analyzing Cavitation in Marine Propeller: A Computational Approach with Consideration for Polymer Applications
Abstract: A major source of noise and blade damage in marine propellers is because of the phenomenon of hydrodynamic cavitation. The Computational Fluid Dynamics (CFD) analysis approach is employed for the prediction of the cavitating propeller’s performance characteristics under various conditions of operation with the advance coefficient (J) ranging from 0.55 to 0.91 and cavitation number (σ) in the range of 0.80 to 4.50. The numerical simulation is performed on INSEAN …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 29–44 Read article
-
Comparative Analysis of Processing-Property Relationships in Metal and Polymer Matrix Composites: A Unified Statistical Framework for Hardness Characterization
Abstract: Composite materials, encompassing both metal matrix composites (MMCs) and polymer matrix composites (PMCs), exhibit complex processing-property relationships that fundamentally govern their mechanical performance across diverse applications. This study presents a unified statistical framework for analyzing hardness characteristics in composite systems, using aluminum-tungsten carbide (Al-WC) metal matrix composites as a representative model system while establishing connections to polymer matrix composite behavior. The investigation employed comprehensive processing parameter optimization, microstructural characterization, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 419–430 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Fractional Calculus-Based Analysis of Magneto-Thermal Nanofluid Flow Over Stretching and Shrinking Surfaces
Abstract: This study presents a comprehensive investigation of magneto-thermal hybrid nanofluid flow over stretching and shrinking surfaces using a fractional calculus framework to capture the memory and hereditary characteristics of complex fluid transport phenomena. The proposed model incorporates the effects of magnetic field intensity, thermal radiation, viscous dissipation, Brownian motion, and thermophoretic diffusion on the velocity and temperature distributions within the boundary layer region. A fractional-order derivative formulation is employed to …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites Read article
-
Exploration of Mechanical Characteristics and Microstructural Analysis of Copper Matrix Composites with Hybrid Reinforcements via Muffle Furnace Sintering
Abstract: Metal Matrix Composites (MMCs) have drawn a lot of interest in the area of innovative materials because of how widely they may be used. Due to their extraordinary qualities, such as high thermal conductivity, higher temperature endurance, improved corrosion resistance, and great weldability, copper matrix composites stand out among them. These qualities make them desirable and promising materials for uses including heat exchangers, automotive parts, and electrical components. In this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 119–126 Read article
-
Influence of Aspect Ratio on the Mechanical and Tribological Properties of Vertical Centrifugal Cast Aluminium Silicon Alloy
Abstract: To get a sound cast of precise shape and size in the vertical centrifugal casting process, the flow behavior of the melt and process parameters such as aspect ratio of the mould, rotating speed, volume fraction, etc. must be optimized. The optimal parameters of the vertical centrifugal casting process derived from past cold modelling studies in casting of Al-12%Si alloy are investigated in this paper. Casts were obtained using 7 …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 104–111 Read article
-
Characterization and Fabrication of Particle Board from Banana Fiber and Sawdust as A Hybrid Composite
Abstract: The current global landscape emphasizes the search for eco-friendly and regenerative materials. Utilizing environmentally available fibers in conjunction with polymeric resins through efficient manufacturing processes offers a cost-effective solution with high-quality standards. Polymer matrix composites with fiber reinforcements possess several advantages, including low production costs, ease of fabrication, and improved material properties, making them applicable in a wide range of industrial contexts. This paper emphasizes the creation of Particle boards …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 192–200 Read article
-
Effect of Steel Fibre on the Flexural Strength of Self- Compacting Concrete
Abstract: With the increase in demand in the construction industry Self-Compacting Concrete is becoming more popular due to its versatile nature of improved efficiency. But the SCC possesses some properties which makes it brittle under tensile forces. The behavior of SCC as a structural material can be improved with the addition of Steel Fibres in adequate amount. In fact, the fibre reinforcement mechanism can convert the brittle behavior of concrete into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 230–239 Read article
-
Parametric Study of Fiber-Reinforced Concrete with Partial Cement Substitution Using Fly Ash and Rice Husk Ash
Abstract: This research aims to evaluate the impact of incorporating steel fibers [SF] and partially substituting cement with rice husk ash [RHA] and fly ash [FA] on the properties of concrete. SF were added in different volume fractions [0%, 0.25%, 0.5%, 0.75%, and 1.0%], combined with 10% RHA and 20% FA. Initially, the concrete mix contained 30% FA with no RHA, which was then adjusted to a mix of 15% FA …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 171–180 Read article
-
Exploring The Performance Dynamics of Basalt Fibre Reinforced Polymers: Mechanical and Viscoelastic Insights
Abstract: Basalt fibre reinforced polymer (BFRP) composites are gaining significant attention as sustainable alternatives to traditional reinforcement materials due to their superior mechanical performance, thermal stability, and eco-friendliness. This study examines the tensile, flexural, impact, and viscoelastic properties of BFRP composites fabricated via vacuum-assisted resin transfer molding (VARTM) using varying fibre volume fractions (20%, 30%, and 40%) and fibre orientations (unidirectional and bidirectional). The results reveal that composites with 40% fibre …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–22 Read article
-
Failure Analysis of Hybrid Natural/Synthetic Fiber Composite Laminates in The Application of Hybrid Composite Pressure Vessel
Abstract: Composite laminates are frequently utilized in multiple sectors. The growing complexity of composites in aircraft applications necessitates hybridization of these materials. These hybrid laminates consist the combination of one natural fiber and two selected synthetic fibers. This work investigates three different six-layer hybrid composite laminate combinations: Jute2/Carbon2/Jute2, Jute2/Glass2/Jute2, and Carbon2/Glass2/Carbon2, with helix angles of 0° and 90° and a volume fraction of 50% fiber content. Each specimen is fabricated utilizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 85–98 Read article
-
Development of Environmentally Sustainable Epoxy Composites with Sunflower Seed Husk Fillers and Study on Thermal and Moisture Properties
Abstract: This study examines the development and characterization of epoxy composites reinforced with sunflower seed husk (SSH) fillers fabricated using the compression molding technique. SSH fillers were categorized into two distinct particle size distributions, namely, 4–53 µm and 79–463 µm, and were incorporated into the epoxy matrix at varying volume fractions ranging from 5% to 20%. The water absorption behavior of the composites was assessed according to ASTM standards, and thermogravimetric …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 28–37 Read article
-
A Review on Predicting Wear and Friction of PTFE Composites - Fillers to Machine Learning Models
Abstract: Polytetrafluoroethylene (PTFE) composites, a self-lubricating material with low friction, became an indispensable material in engineering applications where load carrying capacity and wear are crucial. The pure PTFE has poor mechanical strength and wear resistance which can be enhanced by the addition of fillers in appropriate volume fraction. The wear performance is dependent on various factors such as fillers, operating parameters, environmental conditions as well as manufacturing attributes. This makes the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 114–128 Read article
-
A Comprehensive Examination of the Compressive Test Results of Concrete Formulations Modified by The Insertion of Ceramic Powder and High-Density Polyethylene Illustrates Nuanced Changes in the Structural Performance Attributes of the Resultant Composite Materials
Abstract: It is becoming crucial to transition from a traditional, utilization-based society to a sustainable one, resulting of the decline in the natural environment, depletion of natural resources, and decreased capacity for final waste disposal. As the populatio grows, so will the demand for concrete. The major goal of this research is to look at the possible technical benefits of using extruded recycled high-density-polyethylene (HDPE) fibers into structural concrete. The mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 193–205 Read article