Search
42 articles for “Tribological Properties”
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
Experimental investigation of thermally grown Indium film’s structural and tribological properties
Abstract: Indium thin film growth found numerous applications, such as cold welding of infrared detectors and readout-integrated circuits (ROIC) to form sensor chips. In film is grown on the Si substrate by thermal evaporation. The XRD results indicated the tetragonal bcc phase in the (101) preferential plane. Scanning electron microscopy (SEM) indicated an uniform, continuous film covering the whole surface. The EDS examination confirmed the pure In film. The atomic force …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 58–66 Read article
-
Influence of Aspect Ratio on the Mechanical and Tribological Properties of Vertical Centrifugal Cast Aluminium Silicon Alloy
Abstract: To get a sound cast of precise shape and size in the vertical centrifugal casting process, the flow behavior of the melt and process parameters such as aspect ratio of the mould, rotating speed, volume fraction, etc. must be optimized. The optimal parameters of the vertical centrifugal casting process derived from past cold modelling studies in casting of Al-12%Si alloy are investigated in this paper. Casts were obtained using 7 …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 104–111 Read article
-
Review Article on Biomedical Lubricant Hydrogels as Cartilage Substitutes
Abstract: This article underscores the increasing popularity of hydrogel lubricants in the biomedical domain and presents a comprehensive exploration of their potential as substitutes for cartilage. This understanding forms the foundation for the development of hydrogel-based lubricants that are designed to emulate these natural functionalities. Providing detailed insights, this article navigates through cutting-edge bio-inspired architecture techniques tailored to create hydrogels for cartilage. The emphasis is on achieving superior strength through diverse …
Published in Research & Reviews : Journal of Physics · Vol. 13, Issue 1, 2024 · pp. 35–48 Read article
-
Improvement of Geometric Tolerances and Mechanical Properties of Aluminum Hybrid Metal Matrix Composites
Abstract: In the field of metal matrix composite materials, there has been a generous thrust towards the development of electrical discharge machining (EDM). In this study, stir casted aluminum hybrid metal matrix composites were successfully machined using EDM by analyzing the input process parameters namely, pulse-on time, peak current, and gap voltage using L27 orthogonal array. The ideal conditions for various output responses such as material removal rate, circularity, and radial …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1583–1592 Read article
-
Electro Less Duplex Nickel Coating and Tribological Characterization Under Elevated Temperature
Abstract: Electroless Ni-P (EN) coatings had previously demonstrated their ability to improve the tribological properties of the underlying substantial. This is due to its high hardness, fatigue strength, and chemical resistance. Nevertheless, the EN coverings' effectiveness at high temperatures, as well as their heat resistance, have yet to be evaluated. The current work investigates the tribological properties, namely friction and wear, of EN coatings at increased temperatures (100 ºC, 200 ºC, …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 1, 2023 · pp. 12–17 Read article
-
Advancements In Al6061 Metal Matrix Composites: The Role of SiC, Al₂O₃, and Graphite Reinforcements in Enhancing Properties and Applications
Abstract: Al6061-based metal matrix composites (MMCs) reinforced with silicon carbide (SiC), graphite (Gr), and aluminum oxide (Al₂O₃) exhibit a unique combination of mechanical, thermal, and tribological properties, making them highly suitable for advanced engineering applications. SiC enhances hardness, wear resistance, and load-bearing capacity, while Al₂O₃ improves thermal stability and mechanical strength. Graphite provides self-lubricating properties, reduces friction, and lowers the composite's density, improving fatigue resistance. The synergy of combining these reinforcements …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 90–98 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
An Analysis of Machining Parameters for Metal Matrix Composite
Abstract: The electro-discharge machining analysis of hybrid Composite is presented in this work. Variables are chosen for the input process parameters. The material removal rate is acknowledged as an output parameter, together with the current, graphite and silicon carbide percentage and pulse on time. We used the Taguchi Method to conduct our experiments. To create the theoretical model and look into how process parameters affect the rate at which material is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 76–85 Read article
-
Fabrication and Experimental Investigation on Mechanical Properties of Quartz Particulate Reinforced Aluminium Composite
Abstract: Composites are processed by adding a reinforcement phase in a base metal. The base material is known as a matrix and the constituent that is added is called reinforcement. The matrix acts as a support while the reinforcements attach themselves in their respective positions which results in the synthesis of a material which has different mechanical and thermal properties compared to their raw materials. Since aluminium is used as a …
Published in Journal of Production Research & Management · Vol. 14, Issue 3, 2024 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Investigation of Mechanical Behaviour in Brake Shoe Liner by Using Composite and Nano Materials
Abstract: The mechanical performance of the brake shoe liners dictates the safety and efficiency of the vehicles; thus, brakes are very vital in ensuring controlled deceleration and stopping. In the past few decades, composites have significantly impacted the automotive industry through lighter, stronger, and sturdier alternatives to traditional materials improving overall performance. Nano additives are of key importance in such composites, improving not only the mechanical properties but, more significantly, the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 280–295 Read article
-
Metaheuristic Design of Epoxy-Based Polymer Composites
Abstract: This research investigates the optimization of epoxy resin based polymer compositions in composite materials to enhance their mechanical and tribological properties for industrial applications. We examined the properties of composite materials by running experiments and optimizing these results using Firefly and five optimization algorithms to find the best steel and epoxy ratios. Our tests confirmed that higher dosages of steel powder increased materials' resistance to breaking and impacts yet lowered …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 769–791 Read article
-
Improvement in Mechanical Properties Using High Velocity Oxyfuel Coating (HVOF): A Review
Abstract: Surface modification plays a vital role in improving the service life of different machine parts used in number of industries. Due to daily routine operations at difficult environment conditions, most of machine components have failure in their operations. In these types of cases, only materials with superior wear resistance can be used or material surface can be modified by coating. High velocity oxyfuel coatings (HVOF) play a significant role in …
Published in Trends in Machine design · Vol. 12, Issue 2, 2025 · pp. 1–8 Read article
-
An Experimental Investigation of Machining Parameters on Aluminum Composites
Abstract: The need for a material with good mechanical, thermal, and wear resistant properties is satisfied by aluminum composite. However, the biggest obstacle to substituting it with alternative materials is the machining challenges. For this kind of hard-to-cut material, electric discharge machining is a very efficient method. Thus, using a Taguchi-based method, an attempt has been made to determine the most advantageous amount of input parameters for EDM of Al composite. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 8–13 Read article
-
Squeeze Casting of Hybrid Aluminum Matrix Composites: A Critical Review of Process Optimization, Reinforcement Strategies, and Performance Outcomes
Abstract: Increasing demand for lightweight, performance-oriented components in automotive, aerospace, and defense industries has driven advancements in squeeze casting, a hybrid technique merging forging and die-casting advantages to produce near-net-shape aluminum matrix composites (AMCs) with superior mechanical-tribological properties. This review critically examines the interplay of process parameters (e.g., squeeze pressure: 70–150 MPa, melt temperature: 650–800°C), reinforcement characteristics (volume fraction ≤10%, particle size: 10–71µm), and interfacial engineering strategies (flux-assisted bonding, ultrasonic dispersion) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 52–60 Read article
-
Mechanical & Tribological Characterization of Al2024-Alumina-Graphite Reinforced Monolithic and Hybrid Composites
Abstract: This work investigates the mechanical characteristics of Al2024-Al2O3-Graphite reinforced monolithic and hybrid composites fabricated by the stir casting method. Exploratory work involved the fabrication of monolithic composites with varying Al2O3 contents (5-8 wt%) and hybrid composites with the ratios of Al2O3 (2-6 wt%) and Graphite (1-3 wt%) in matrix Al2024. For improving their dispersion, preheated reinforcement particles were introduced in matrix alloy at controlled stirring rates. A homogeneous particle distribution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 823–836 Read article