Search
21 articles for “Steel fibre”
-
Impact of Composite Materials by Silica Fume and Fly Ash in Cement and Partial Substitution of Fine Aggregate Using Quarry Dust in Steel Fibre Concrete
Abstract: Mineral admixtures can be added to concrete to replace some of the cement, increasing its overall strength. Fly ash (FA) and silica fume (SF) are two often used mineral admixtures. A series of experiments were conducted to investigate the effect of adding varied amounts of fly ash and a consistent amount of silica fume on concrete strength by using the same amount of substitute for cement and the same water-binder …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 139–147 Read article
-
Effect of Steel Fibre on the Flexural Strength of Self- Compacting Concrete
Abstract: With the increase in demand in the construction industry Self-Compacting Concrete is becoming more popular due to its versatile nature of improved efficiency. But the SCC possesses some properties which makes it brittle under tensile forces. The behavior of SCC as a structural material can be improved with the addition of Steel Fibres in adequate amount. In fact, the fibre reinforcement mechanism can convert the brittle behavior of concrete into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 230–239 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Evaluation of Impact Strength and Hardness for Polymer Matrix Composites with Steel, Carbon and Glass Reinforcements for Automotive Applications
Abstract: Polymer matrix composites (PMCs) play a crucial role in a wide range of engineering submissions, owing to their impressive strength-to-weight ratio and customizable mechanical properties. This research focuses on examining how PMCs, enhanced with different materials, specifically carbon fibres, glass fibres, and steel fibres, behave when subjected to dynamic and static loading conditions. The study involves creating three distinct types of PMC specimens, each reinforced with one of the mentioned …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 738–748 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Comparative Investigation of Solar Still by Varying Basin Water Depth and Integrating Energy Storage Material and Steel Wool Fibre
Abstract: The main obstacle to human life in the modern age was the unequal distribution of drinking water on Earth. The demand for drinking water is increasing due to population growth and industrial exploitation, while supply levels are essentially unchanged. Because of its simplicity in construction, techno-economic advantages, and environmental friendliness, solar energy is still regarded as one of the best methods for turning saline into potable water. The main disadvantage …
Published in Trends in Machine design · Vol. 12, Issue 1, 2025 · pp. 1–11 Read article
-
An Experimental Investigation of High Performance by Using Steel and Polypropylene Fibres
Abstract: This study explores the feasibility of partially substituting conventional cement in concrete with steel and polypropylene fibers to improve mechanical performance and introduce alternative composite materials. Concrete cube specimens measuring 150 × 150 × 150 mm were cast with varying mix designs corresponding to M20 and M25 grades. The experimental program was executed in two distinct phases. In Phase I, control mixes of M20 and M25 grade concrete were prepared …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 7–13 Read article
-
Analytical exploration of self-consolidating concrete (SCC) mix proportions via the Taguchi method
Abstract: To address the challenge of limited space within structural elements containing densely packed reinforcement, Self-Compacting Concrete (SCC) was developed. This study focuses on optimizing the experimentation process using Design of Experiments (DoE). Taguchi's standard L(3) orthogonal array (OA) was utilized, consisting of four factors with three levels each, resulting in nine trial mixes. The factors examined include water-powder ratio, cementitious material content, superplasticizer dosage, and steel fiber content. The aim …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 1, 2024 · pp. 1–16 Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
Computational Analysis of Leaf Spring System with Functionally Graded Materials Using ANSYS
Abstract: Leaf springs are important parts of a vehicle’s suspension system, and their main function is to absorb shocks, improve stability, and make the ride more comfortable. Traditionally, ASTM A36 steel is used because it is strong, long-lasting, affordable, and easy to get. However, this type of steel is very dense, which makes vehicles heavier. This extra weight makes the vehicle less efficient and increases emissions. Because of these issues, there …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 380–397 Read article
-
A Comprehensive Review of Concrete Containing Magnetically Treated Water
Abstract: In Present scenario, Construction has benefited greatly from the characteristics of concrete and the magnetism of water. The procedure of permitting water to pass through the magnetic field is part of creating magnetised water, utilizing those properties of concrete that can affect such as compressive strength, workability, porosity, permeability, durability, water absorption capacity, hydration rate and aqueous ratio. Reduced cement usage and improved mechanical and technical qualities of concrete are …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 52–64 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Hybrid Composite Behavior of Concrete-Filled Steel Tube (CFST) Columns: Review of Collapse Mechanisms and Polymer-Based Enhancements
Abstract: Concrete-Filled Steel Tube (CFST) columns are an advanced hybrid composite system where the steel tube's confinement and the concrete core's load capacity work together to improve structural performance. While commonly used in civil engineering, CFSTs can also be understood within the framework of composite materials, similar to polymer- and fiber-reinforced composites, in which interactions between phases determine strength, ductility, and failure modes. This review compiles experimental and numerical research on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 78–97 Read article
-
Mechanical Characterization of Adhesive in Lap Joint Under Tensile Load
Abstract: The present work gives details of adhesive characterization in lap joints under quasi static tensile failure load. Rivets are major threat for an aircraft structure because of high stress concentration at lesser area ease to failure and also causes drag in aerodynamic perspective. Researchers are searching for a different method to avoid the stress concentrations in lesser area. The use of adhesives instead of rivets is most feasible solution for …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 96–103 Read article
-
Low-Weight, High-Durability Crankshaft Development Using Glass Fiber Composites: Numerical and Experimental Investigations
Abstract: The present paper aims towards the weight reduction of crankshaft by replacing conventional medium carbon steel for a two-wheeler with composite material. The replacement is such that it significantly reduces load on other components without compromising structural integrity. It will also serves in terms of operating reliability or durability over its life span. A geometric specifications and dimensions were obtained using a 3D CAD model developed in CATIA V5. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
An Overview of New Coastal Research Vessel (N-CRV) Dry Dock and Construction
Abstract: A New Coastal Research Vessel (N-CRV) is a specialized ship designed for scientific research in fields like oceanography, geology, biology, and atmospheric studies, equipped with specific facilities and accommodations for sea missions. This paper discusses the coastal research ship dry-dock, construction, and design process, which involves three stages: concept, preliminary, and contract design. N-CRV must utilize scientific cruise, Exclusive Economic Zone (EEZ) survey, deployment, data collection, and seawater sample collection …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 3, 2024 · pp. 1–11 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Experimental and Statical Analysis of Glass Fibre Reinforced Concrete
Abstract: During the most recent couple of decades, with the chance of fortifying the solid with fiber support to an incredible preferred position, the solid development field has encountered an expanded consideration. Various strands utilized are steel, manufactured, glass and common filaments, a portion of the planned advantages of filaments in concrete are improved split control and the chance of planning progressively thin structures. Glass fibre is a vital ingredient used …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 266–273 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Fabrication of Natural Fibre Reinforced Polymer Composite by Hand Lay-Up Process
Abstract: The recent development in technologies has increased the usage of non-renewable resources during pro- duction due to remarkable properties. However, it has been a threat and unable to be replenished once used. In addition to this, natural fibre strengthens in a more significant way and it’s widely applicable in polymer composites materials. Furthermore, the use of plant fibres in polymer composites is due to its low cost and significant properties. …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 13–19 Read article