Search
48 articles for “Pressure distribution”
-
Aerodynamic Influences on Structures with Varied Plan Configurations
Abstract: The wind-induced effects on tall buildings demonstrate a level of unpredictability, attributed to the intricate influence of the building's plan shape on the distribution of wind loads. The oscillations experienced by tall structures, both longitudinally and laterally, are influenced by factors such as wind direction, building configuration, height, and structural characteristics. This investigation is centred around examining the impact of wind on tall buildings featuring diverse plan cross-sectional shapes. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 377–388 Read article
-
A Study of The Performance of surface modified NACA 2416 Airfoils at various Angles of Attach at Re80000
Abstract: This study delves into the aerodynamic effects and characteristics of surface-modified NACA 2416 airfoils, placing a greater emphasis on the aerodynamic efficiency of a two-dimensional surface-modified NACA 2416 airfoil under subsonic flow conditions at Re=80000 and various angles of attack (AOAs). The surface-modified airfoils were crafted using CATIA V5, and simulations were conducted in ANSYS Fluent for angles of attack ranging from 0° to 12°.The CFD results encompass a broad …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 34–39 Read article
-
A review on the Enhancing Heat Exchanger Efficiency with CuO/Water Nanofluid in a Shell and Helical Coil System
Abstract: Over the years, there has been a lot of focus on improving heat transmission by utilizing various approaches in an effort to make heat exchangers smaller and less expensive. The following methods have been found to be the most successful in increasing heat transfer rate in heat exchangers: Nano-Fluids, first (3) Rubbing heat exchanger surfaces rough. (2) Inserting fluid tabulators. However, a combination of all three approaches or any two …
Published in Trends in Mechanical Engineering & Technology Read article
-
Hydrodynamic Analysis of Symmetrical Naca Airfoils: A CFD Simulation Approach
Abstract: This study presents a comprehensive numerical investigation of the hydrodynamic characteristics of selected NACA airfoil profiles using advanced computational fluid dynamics (CFD) simulations performed in ANSYS Fluent. The primary objective is to evaluate the fluid–structure interaction behavior of these airfoils when subjected to marine flow conditions relevant to offshore and submerged engineering applications. By modeling the interaction between incompressible fluid flow and various NACA geometries, the study systematically analyzes key …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 31–38 Read article
-
Analysis of Submarine Hydrodynamics and NACA Aerofoils Using Ansys Fluent
Abstract: This study investigates the hydrodynamic behaviour of submerged offshore vehicles, including submarine hull and NACA aerofoils through simulation and fluid flow analysis, using ANSYS Fluent. The study models the interaction between fluid flow and offshore submerged vessels i.e. a Standard Submarine Model and various NACA profiles, simulating pressure distributions and drag forces that affect offshore operational stability. The analysis comprises of the study of multiple mesh profiles required to calculate …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 2, 2025 · pp. 48–55 Read article
-
Effect of Blunt Truncation in an Aerospike Nozzle
Abstract: Aerospike nozzles are gaining attention as a more advanced alternative to conventional bell nozzles, mainly because they can perform efficiently across a wide range of altitude conditions. Unlike traditional converging–diverging nozzles, aerospike designs naturally adjust to changes in ambient pressure, allowing the exhaust flow to expand more effectively. This results in better thrust performance under varying operating conditions, making them a strong candidate for future aerospace propulsion systems. In this …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Computational Analysis of Non-Newtonian Blood Flow through Bifurcated Coronary Artery: Insights into Hemodynamics and Wall Shear Stress
Abstract: This abstract presents a study on the computational fluid dynamics (CFD) simulations of blood flow through a bifurcated coronary artery using non-Newtonian fluid model. The objective of this study is to investigate the hemodynamic characteristics in Bifurcated Coronary artery. The methodology involved the utilization of ANSYS SpaceClaim software for creating a geometric model of the bifurcated coronary artery. A mesh independent study was conducted to ensure the accuracy and reliability …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 160–168 Read article
-
Maximizing Flow and Ensuring Leak Tightness Through Design and Development of a Unidirectional Check Valve
Abstract: The check valve market, valued at USD 6.5 billion in 2024, is expected to grow at a 4.1% CAGR. Challenges in valve seat materials, particularly SS304 and PTFE (Teflon), contribute to a 0.5% leak rate, which leads to helium gas loss, reduced efficiency, and higher operational costs. While various sealing techniques, including hard-on-soft methods, have been explored, few have been applied to poppet check valves. This study focuses on improving …
Published in International Journal of Industrial and Product Design Engineering · Vol. 2, Issue 2, 2024 · pp. 10–18 Read article
-
Aerodynamic Optimization of UAV Wings Using Machine Learning
Abstract: Unmanned Aerial Vehicles (UAVs) are increasingly deployed across defense, transportation, agriculture, and environmental monitoring, demanding improved aerodynamic efficiency to enhance endurance, stability, and payload capacity. Traditional aerodynamic optimization approaches, relying on computational fluid dynamics (CFD) simulations and wind tunnel experiments, are often time-consuming and computationally expensive. This study proposes a machine learning (ML)-driven framework for the aerodynamic optimization of UAV wing geometries, aiming to significantly reduce design cycles while improving …
Published in International Journal on Drones · Vol. 2, Issue 1, 2026 · pp. 1–7 Read article
-
Understanding the Efficacy of Homoeopathic Remedies in the Treatment of Heloma (Corn)
Abstract: Heloma (Corn), is a horny induration and thickening of the stratum corneum resulting from faulty mechanics, irregular distribution of pressure, bony prominences and repetitive motion injury due to repetitive activities or problems with footwear. Thus, both the extrinsic factor and the intrinsic factor are responsible for the formation of Heloma (Corn) affecting 14-18% of people. As most people consider it as a non-threatening condition, they seek home remedial measures like …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 11, Issue 2, 2024 · pp. 23–30 Read article
-
Integrated Perspectives on Fluid Mechanics and Energy Transport in Complex Flow Systems
Abstract: Fluid mechanics plays a central role in understanding the transport of mass, momentum, and energy in complex flow systems encountered in both natural and engineered environments. This review presents an integrated perspective on fluid behavior by combining fundamental principles with modern approaches to energy transport analysis. The study emphasizes the significance of conservation laws and their application to diverse flow regimes, including laminar, turbulent, compressible, and multiphase flows. Energy transport …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 22–31 Read article
-
Thermo-Hydraulic Enhancement of Annular Finned Shell-and-Tube Heat Exchangers Using Epoxy-Based Polymer Composites: A Material–Geometry Coupled CFD Investigation
Abstract: Shell-and-tube heat exchangers remain a backbone of industrial thermal systems, yet their performance is often limited by relatively low shell-side heat transfer and the weight and cost associated with conventional metallic components. In this context, the integration of polymer composite materials offers a promising pathway toward lightweight, corrosion-resistant, and performance-tunable heat exchanger designs. The present study investigates the thermo-hydraulic performance of a straight-tube shell-and-tube heat exchanger equipped with annular fins, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 669–684 Read article
-
Optimization of An Intercooler Used in Multi Stage Compressor Using with and Without Baffels
Abstract: Thermal and CFD analysis is done on the intercooler. CFD analysis is done under different boundary conditions. The materials considered for shell and tube intercooler are Aluminum, Titanium and Copper for thermal analysis and compared for better material. The input of heat transfer coefficient for thermal analysis is taken from output of CFD analysis. The intercooler's pressure gradients, temperature distributions, and fluid flow patterns can all be understood using CFD …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 1–8 Read article
-
Thermo–Electrical Performance Enhancement of a Lightweight Polymer–Metal Hybrid Electrostatic Precipitator Using Epoxy-Based Composite Housing for Industrial Particulate Control
Abstract: Airborne particulate emissions, particularly PM₁₀ and PM₂.₅ produced by industrial activities and combustion processes, they continue to pose a significant threat to both the environment and public health. Electrostatic precipitators (ESPs) are widely recognized for their ability to achieve high collection efficiencies; however, conventional metallic constructions often lead to increased system weight, higher fabrication costs, and long-term corrosion-related challenges. In this study, a lightweight hybrid material approach is proposed by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 652–668 Read article
-
Analysis aspects of pressure tank: A review
Abstract: This review paper presents a detailed analysis of pressure vessels, focusing on finite element analysis (FEA) to evaluate structural integrity. Pressure vessels are widely used in industries such as chemical processing, power plants, and oil refineries, where they are subjected to extreme temperature and pressure conditions. Ensuring their safe and efficient operation requires a thorough understanding of stress distribution, deformation characteristics, and failure mechanisms. This study reviews existing research on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 49–55 Read article
-
Optimization of Type-4 Plastic Liner Composite Overwrapped Pressure Vessel Design
Abstract: Composite Overwrapped Pressure Vessels (COPVs) are prominently utilized for the storage of gases at high-pressure. Their widespread adoption is because they are significantly lighter weight compared to complete metal counterparts, but requires specialized design, and manufacturing process. This research employs finite element modelling to analyse the stress and failure assessments on a specific Type-IV COPV with plastic liner as core cylinder. This study aims to optimize COPV design by considering …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 405–412 Read article
-
Thermal Management of Different Composites Materials Using a Convergent and Straight Vortex Tube
Abstract: The present study focuses on an in-depth and meticulous exploration into the intricate realm of thermal management in three distinct yet widely utilized composite materials—namely, Liquid Crystal Polymer (LCP) Composites, Glass Fiber Reinforced Polymers (GFRPs), and Aramid Fiber Composites (Kevlar). This investigation employs an innovative counter-flow vortex tube system, meticulously analyzing and comparing the thermal efficiency of these materials under different intake configurations. Specifically, two distinct geometrical intake designs—a straight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 252–266 Read article
-
Thermal-hydraulic Behaviour of Corrugated Pipe Configurations
Abstract: Heat exchangers have a wide range of applications and can be found in a variety of different industries, including chemical reactors, nuclear power plants, and solar energy generation. It is required to do thermal optimization on heat exchangers in order to decrease the size, cost, and energy requirements of the heat exchangers while simultaneously improving their capacity to transmit heat. In these types of businesses, heat exchangers frequently make use …
Published in Journal of Polymer & Composites Read article
-
Investigating the Surface Defects and Structural Integrity of 3D Printed Hydrogen Storage Cylinders in UAV Applications
Abstract: This research explores the processing and manufacturing challenges of 3D printed polymer composites for high-pressure hydrogen storage in UAVs. The study focuses on addressing surface integrity and structural robustness issues inherent in additive manufacturing. Finite Element Analysis (FEA) was conducted on four thermoplastic polymer ABS, PET-G, HDPE, and Nylon to assess their mechanical performance under 35 MPa of pressure. Results revealed that PET-G and ABS provided better stress distribution and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 161–191 Read article
-
Design and Validation of an Artificial Intelligence-Driven Digital Twin for Real-Time Monitoring and Control in Polymer Composite Manufacturing
Abstract: Polymer Matrix Composites (PMCs) have become indispensable in high-performance sectors such as aerospace and automotive engineering, offering exceptional strength-to-weight ratios that outperform traditional metals in many demanding applications. However, the reliability of manufacturing PMCs via Vacuum-Assisted Resin Transfer Molding (VARTM) is frequently undermined by stochastic process variabilities. Unpredictable fluctuations in thermal history, preform permeability, resin rheology, and ambient conditions often lead to some defects; namely voids, dry spots, and incomplete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 224–233 Read article