Search
17 articles for “Microstrip circular patch antenna”
-
Optimization of Characteristics of a Simple Microstrip Circular Patch Antenna using Rotable Slot
Abstract: In this paper, we have designed a simple circular patch antenna which radiates at 2.8 GHz. A slot is introduced and is rotated along the center axis. We have noticed that the frequency of the antenna is varied as a function of slot orientation. An optimal slot angle is determined based on the return loss and then the slot, patch dimensions are optimized to increase the realized gain and return …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 3, 2015 · pp. 31–36 Read article
-
Experimental Analysis of Rectangular and Circular Microstrip Patch Antenna with Superstrates
Abstract: This paper focusing on the experimental analysis of rectangular and circular microstrip patchantennas with and without radome (superstrate). The proposed antennas were designed at2.4GHz, using HFSS simulation software and fabricated on Arlon DiClad 880 substratewhose dielectric constant is 2.2, loss tangent is 0.0009 and thickness of the substrate is1.6mm. Placing different dielectric constant of the superstrates above the patch antennasperformance characteristics have been studied of both antennas on the basis …
Published in Recent Trends in Electronics Communication Systems · Vol. 7, Issue 3, 2020 · pp. 34–45 Read article
-
An Extended Semi-circular Microstrip Patch Antenna with DGS for UWB Applications
Abstract: This paper presents the design of a semicircular patch with an extended length for UWB applications. The proposed antenna is fabricated on FR4 substrate with relative permittivity of =4.4 and dimensions of 29.5x38x1.57 . The feed used in proposed design is 50 Ω microstrip feed line. The partial ground structure with a T-shaped slot and dual right angled isosceles triangular notches of side 3 mm each has been introduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 13–18 Read article
-
Co-planar Waveguide Circular Ring Microstrip Patch Antenna for WLAN Applications
Abstract: AbstractA printed circular microstrip patch antenna with a four rectangular shape strip and co planar rectangular ground plane has been proposed. Four rectangles of dimensions 4.8mm x3mm are arranged in such a manner to achieve both the WLAN frequency band. The bandwidths of 341MHz and 414MHz are achieved having a resonant frequency of 2.37GHz and 5.45GHz respectively. This antenna is printed on the glass epoxy (FR4 lossy) of dielectric substrate …
Published in Journal of Communication Engineering & Systems · Vol. 6, Issue 3, 2016 · pp. 1–6 Read article
-
A Survey on Recent Microstrip Patch Antenna for Navigational Application
Abstract: ABSTRACTSince last so many years microstrip patch antenna is one of the important fields for antenna design. For a different application of satellite communication in which prize, structure simple installation process is one of the key requirement low profile antenna is good to consider. Microstrip antennas is also fulfill the requirements of mobile communication as well as wireless communication. For navigational application the few important parameters are there like compact …
Published in Journal of Communication Engineering & Systems · Vol. 9, Issue 1, 2019 · pp. 55–59 Read article
-
A Circular Slot Loaded H-Shaped Printed Microstrip Patch Antenna for Lower Band 5G Applications
Abstract: Abstract: A circular slot loaded H-Shape patch antenna is introduced in this paper. A circular slot loaded H-Shape patch antenna is fed with coplanar wave guide (CPW) is discussed which is applicable for lower band 5G applications. The radiation pattern is omni-directional which is very near to H-plane. The area of ground plane is 80×101×1.5 mm3 with substrate material having dielectric constant 2.2 and loss tangent 0.002 is used. The …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 1, 2019 · pp. 9–14 Read article
-
Design of a Microstrip Patch Antenna with an Array of Circular SRR Using Left-Handed Metamaterial
Abstract: In this paper, the design of a patch antenna with a metamaterial composed of circular SRR is proposed. The proposed antenna design is fabricated on FR4 substrate and the experimental results obtained are in good agreement with the simulated results. By using the circular SRR structure the return loss of the conventional patch antenna has been improved from -11.5dB to -18.5dB. influence of metamaterial designed on another layer characteristics of …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 24–28 Read article
-
Plus Slotted Circular Patch Antenna for WiMax/WLAN Applications
Abstract: A wideband compact circular patch microstrip antenna is presented for various wireless systems such as WLAN and WiMax applications. The proposed antenna has been fabricated and the return loss bandwidth is measured. The simulated and measured antenna such as return loss, bandwidth and gain are presented. The Experimental result shows that the proposed antenna presents a bandwidth of 78.81% with the maximum gain of 6.2 dBi.
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 38–43 Read article
-
Design of a Multiband Antenna with Rectangular and Circular Slots for 5G Mobile Technology
Abstract: AbstractThis paper presents a microstrip patch antenna for 5G mobile communication. Requests for mobile communication arise because of rapid growth in mobile users. So, users need more features like high data rate, good communication and reduced traffic on their mobile phones. These requirements can be met using 5G technology. 5G technology offers very high bandwidth, reduced latency, broadband spectrum, improved QoS and a better capacity. 5G operates from 24 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 30–34 Read article
-
A Dipole Circular Patch Antenna for Operation in the X-Band
Abstract: This microwave engineering research paper proposes, designs, calculates, and simulates a novel dipole circular patch antenna for theoretical wideband operations in the X-band (the 8 GHz to 12 GHz frequency range). This proposed microstrip patch antenna was realized using FR-4 as a dielectric (a thickness of 1.5 mm) with copper being used in both the ground plate and the two transmitting circular elements (the so-called patches with a thickness of …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 2, 2021 · pp. 1–8 Read article
-
Circularly Polarized Microstrip Fed Antenna for Dual Frequency
Abstract: Abstract: The presented antenna is designed for achieving dual frequency characterized circularly polarized behavior. The achievement of dual frequency is done by coupling of the microstrip feed line arrangement with the annular slot shaped with four unequal arms type of slot structure on the patch. The Reflection coefficient, pattern of radiation of the antenna and the Axial ratio are simulated. The impedance bandwidths obtained for lower of (RHCP) is 25% …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 1–5 Read article
-
A Compact Umbrella Shaped Patch Antenna using DGS for Dual/Triple/Quad Band Applications
Abstract: In this paper, a compact Umbrella shaped microstrip patch antenna for Quad band applications specially for X band, Ku band and K band applications is presented. The antenna is simulated using the Ansys soft HFSS simulator. The size of the antenna is 25 mm×25 mm ×1 mm and printed on an FR4 substrate. Defected ground structure in the form of concentric circular rings is used to increase the bandwidth of …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 36–44 Read article
-
Polarization Reconfigurable Antenna: Design and Analysis
Abstract: This paper presents an analysis and design of a polarization reconfigurable microstrip patch antenna fed with single and dual feeds operating at WLAN frequency. For a single feed structure a square patch is designed first and is perturbed for obtaining circular polarization. Using PIN diodes this design can be made to generate different polarizations. In case of a dual feed structure the radiating square patch has dual feeding provision and …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 1, 2015 · pp. 1–8 Read article
-
Multiband Antenna Designing using Proximity Coupled Technique
Abstract: AbstractIn this paper, author proposed a multiband antenna a circular patch and proximity coupled feeding technique. This feeding technique not only showed good result, it made the antenna multiband as well. Author fabricated this antenna to compare it with simulation result and found that fabrication results are also promising. This simulated antenna is a miniaturized four-band antenna which has the capability to operate at four distinguished frequencies. This proposed design …
Published in Current Trends in Signal Processing · Vol. 8, Issue 3, 2018 · pp. 13–17 Read article
-
Bandwidth and Return Loss Enhancement in Patch Antenna by Meta Material using at 2.62 GHz
Abstract: In this work, a rectangular micro strip patch antenna (RMPA) loaded with “Symmetric square Shapes Four Segments with circular rings structure” metamaterial structure is designed at a height 3.2 mm from ground plane by using CST-MWS software. The resonance frequency of the designed antenna is 2.62 GHz. The 10 dB impedance bandwidth of proposed antenna is increased up to 78.3 MHz. The return loss of the proposed antenna reduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 33–37 Read article
-
Tri-Band Edge-Cut Rectangular Microstrip Patch Antenna on Composite Substrate for RF Energy Harvesting in IoT Networks
Abstract: The increasing use of Internet of Things devices underscores the pressing need for sustainable energy solutions, since traditional batteries necessitate regular replacement and constrain scalability. Radio frequency energy harvesting is a viable option; nonetheless, antenna design continues to provide a significant problem owing to the requirements for compactness, efficiency, and multi-band functionality. A hybrid composite substrate configuration combining FR4 (εr = 4.3) and RT Duroid (εr = 2.2) is employed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–883 Read article
-
A Novel Antenna Design based on a Single UC-PBG Layer of High Gain for Wireless Power Transfer
Abstract: In this study, a brand-new, highly effective antenna design is put forth to provide a directional radiation pattern with a small beam width for wireless power transfer. The proposed antenna is constructed from a cross-shaped patch of square holes. A favorable eclipse is paired with the antenna patch to provide circular polarization-symmetrical radiation. A symmetrical quadrature stare-shaped unit cell has a uniform compact photonic bandgap layer (UC-PBG) on top of …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 3, 2022 · pp. 8–19 Read article