Search
24 articles for “Microstrip Line Feed”
-
A Hexagonal Sierpinski Gasket Antenna with a Microstrip Feed Line and a Stub for UWB Applications
Abstract: In this paper a Sierpinski gasket hexagonal antenna is proposed with a feed line having a stub attached to it. Three iterations of the proposed antenna geometry were done and with this improved feeding technique for four resonant bands of operation from 2.86 to 3.3 GHz, 3.758–4.313 GHz, 7.514–8.5468 GHz and 12.352–10.976 GHz were obtained. The antenna is suitable for ultra wideband (UWB) and radiolocation applications. The proposed antenna was …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 1, 2015 · pp. 14–18 Read article
-
Printed Circularly Polarized P-Shaped Patch Antenna for Wireless Communication Application
Abstract: In this paper, a study of wide band partially grounded printed polarized P-shaped microstrip patch antenna design fed by microstrip feed line. This design is considered for the improvement of axial ratio bandwidth. For defecting the ground plane, a rectangular shaped plane has been etched from the upper half of the ground plane to improve the axial ratio bandwidth (ARBW) and impedance bandwidth (IBW). For the improvement of the ARBW, …
Published in Journal of Mobile Computing, Communications & Mobile Networks · Vol. 6, Issue 1, 2019 · pp. 18–22 Read article
-
Design and Analysis of Dual Band Triangular Slotted Microstrip Patch Antenna for GPS and WLAN Application
Abstract: AbstractIn this paper, design of a dual operated microstrip patch antenna is presents. The dual-operation frequencies are chosen for UMTS/GPS and WLAN bands. A microstrip square patch antenna is designed which is excited by a microstrip line feed from the bottom of the antenna. An epoxy glass FR4 material is used as a substrate in the designing of antenna. The antenna is first modified in inverted U-shaped design to operate …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 1–5 Read article
-
Wide Band Open Spanner Patch Antenna for Wireless Local Area Network Application
Abstract: This paper presents the enhancement of bandwidth of a microstrip antenna using slotted design fed by Microstrip line feed. The main aim of proposed work is to obtain large bandwidth with reduced size. The proposed microstrip antenna has a wide bandwidth of 48.99% covering the range from 1.806-2.978 GHz which is best suitable for WLAN application. The proposed patch antenna is designed and simulated on the Zeeland IE3D software. The …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 21–25 Read article
-
Design and Simulation of Triple Band Microstrip Patch Antenna for Ku-band, K-band and Ka-band Applications
Abstract: AbstractThis paper represents a microstrip patch antenna for future 5G-communication technology. The proposed antenna designs are simulated and their performances are analyzed for different parameters like lower return losses, higher gain, voltage standing wave ratio (VSWR), current distribution, far field radiation and wide bandwidth performance for the tri-frequency band operation in Ku band (12–18 GHz),K-band (18–27 GHz) and Ka-band (27–40 GHz) as per the specified IEEE standard. The proposed antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 1, 2020 · pp. 26–33 Read article
-
Design of a Multiband Antenna with Rectangular and Circular Slots for 5G Mobile Technology
Abstract: AbstractThis paper presents a microstrip patch antenna for 5G mobile communication. Requests for mobile communication arise because of rapid growth in mobile users. So, users need more features like high data rate, good communication and reduced traffic on their mobile phones. These requirements can be met using 5G technology. 5G technology offers very high bandwidth, reduced latency, broadband spectrum, improved QoS and a better capacity. 5G operates from 24 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 30–34 Read article
-
An Extended Semi-circular Microstrip Patch Antenna with DGS for UWB Applications
Abstract: This paper presents the design of a semicircular patch with an extended length for UWB applications. The proposed antenna is fabricated on FR4 substrate with relative permittivity of =4.4 and dimensions of 29.5x38x1.57 . The feed used in proposed design is 50 Ω microstrip feed line. The partial ground structure with a T-shaped slot and dual right angled isosceles triangular notches of side 3 mm each has been introduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 13–18 Read article
-
Circularly Polarized Microstrip Fed Antenna for Dual Frequency
Abstract: Abstract: The presented antenna is designed for achieving dual frequency characterized circularly polarized behavior. The achievement of dual frequency is done by coupling of the microstrip feed line arrangement with the annular slot shaped with four unequal arms type of slot structure on the patch. The Reflection coefficient, pattern of radiation of the antenna and the Axial ratio are simulated. The impedance bandwidths obtained for lower of (RHCP) is 25% …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 1–5 Read article
-
An Ultra Wideband Hexagonal Patch Antenna with Enhanced Bandwidth
Abstract: A microstrip line feed Ultra-Wideband (UWB - 3.1 to 10.6 GHz) hexagonal patch antenna with enhanced bandwidth was presented in this article. The enhancement of bandwidth (BW) is achieved by defecting the partial ground structure. The antenna is designed by FR-4 substrate with εr(dielectric constant) = 4.3 & Tan δ (loss tangent) = 0.025.Initially, a conventional hexagonal patch with a partial ground plane produces a – 10 dB bandwidth of …
Published in Recent Trends in Electronics Communication Systems · Vol. 9, Issue 1, 2022 · pp. 11–20 Read article
-
A Dipole Circular Patch Antenna for Operation in the X-Band
Abstract: This microwave engineering research paper proposes, designs, calculates, and simulates a novel dipole circular patch antenna for theoretical wideband operations in the X-band (the 8 GHz to 12 GHz frequency range). This proposed microstrip patch antenna was realized using FR-4 as a dielectric (a thickness of 1.5 mm) with copper being used in both the ground plate and the two transmitting circular elements (the so-called patches with a thickness of …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 2, 2021 · pp. 1–8 Read article
-
Designing of Ultra Wide Band Microstrip Antenna using Triple Slotted Patch and DGS
Abstract: AbstractIn this paper, an antenna is designing for Ultra Wide band that is 32.86 GHz is achieved which is very large bandwidth covering maximum application of wireless network. Initially a normal rectangular microstrip patch antenna with microstrip transmission line feed is designed. By using parallel slots in MSL feeding technique very wide bandwidth is achieved than simple design without parallel slots. Maximum impedance matching and good VSWR is achieved in …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 3, 2018 · pp. 12–19 Read article
-
Design and Implementation of Microstrip Line Fed Rectangular Patch Antenna
Abstract: AbstractThis paper presents a high-performance microstrip line fed rectangular patch antenna with resonance frequency of 2.75GHz. The antenna has been simulated using IE3D software as well as HFSS. The return loss of the patch antenna found to be 24dB through IE3D simulation tool. From the results obtained, it is clear that harmonics exists at 3.75GHz which successfully minimized by removing a part of microstrip conductor with dimensions in accordance to …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 1–4 Read article
-
Effect of Notching on the Return loss of T-shaped Microstrip Patch Antenna for Wireless Communication System
Abstract: AbstractWith the loading of a pair of notches, a T-shaped slot and a pair of rectangular slots, novel bandwidth enhancement of microstrip antenna is demonstrated. The design is fed through a single coaxial probe. The proposed antenna is a modification of a simple T-shaped antenna which provides good radiating characteristics with enhanced bandwidth. The proposed antenna covers the S band and is used for many wireless applications. The proposed antenna …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 2, 2017 · pp. 7–11 Read article
-
Performance Analysis of Rectangular Patch Antenna with EBG using Quarter Wave Feed Line and Coaxial Feed Line Methods for C-Band Radar Based Applications
Abstract: Microstrip antenna has various attractive features like light weight, low cost, easy fabrication, etc. Microstrip antenna can be fed in a variety of ways. This paper is focused on the enhancement of gain of the rectangular patch antenna with electromagnetic band gap structures at 7.5 GHZ for two different feeds and compares their results. The two types of feeds are coaxial line feed and quarter wave feed. Antenna design has …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 19–25 Read article
-
A Neural Network Approach to Study the Bandwidth of C-Shaped Microstrip Antenna
Abstract: This paper presents the use of artificial neural network for the estimation of frequency band and bandwidth of a line feed C-Shaped Microstrip patch antenna. The results obtained by using ANNs are compared with IE3D simulation and found quite satisfactory. The designed antenna operates in the frequency range (1.735 to 1.945 GHz). The antenna is designed using glass epoxy between the ground plane and patch and simulated on the Zeland …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 3, 2015 · pp. 24–30 Read article
-
Design and Performance Analysis of Different UWB Modified Circular and Ring-shaped Microstrip Patch Antennas
Abstract: The importance of wearable products such as wearable textile antenna is increasing day by day because of the recent miniaturization of wireless devices. In the last few years it has received a vast amount of attention due to utilization in smart clothing and future consumer-centric communication technologies. The main challenges for designing textile antennas are low weight, low profile and low cost. The fabrication technique and the use of materials …
Published in Recent Trends in Electronics Communication Systems · Vol. 3, Issue 1, 2016 · pp. 9–28 Read article
-
Koch Slot DRA Antenna Array for Enhanced X-Band Applications
Abstract: This work introduces an innovative method aimed at improving the gain of Dielectric Resonator Antenna (DRA) arrays functioning within the X-band spectrum. The design features a Koch-shaped slot-coupled feeding structure, utilising the properties of a short-ended microstrip line to enhance radiation directionality. The results of the simulation show that compared to conventional rectangular and V-shaped slot designs, the suggested antenna array provides a notable gain enhancement. This performance boost demonstrates …
Published in Recent Trends in Electronics Communication Systems · Vol. 12, Issue 2, 2025 · pp. 8–20 Read article
-
Signaling Techniques in Telecommunication Network
Abstract: The importance of wearable products such as wearable textile antenna is increasing day by day because of the recent miniaturization of wireless devices. In the last few years it has received a vast amount of attention due to utilization in smart clothing and future consumer-centric communication technologies. The main challenges for designing textile antennas are low weight, low profile and low cost. The fabrication technique and the use of materials …
Published in Recent Trends in Electronics Communication Systems · Vol. 3, Issue 1, 2016 · pp. 48–55 Read article
-
Wi-Fi Shaped Quad-band Microstrip Antenna for RF Energy Harvesting Applications
Abstract: AbstractIn this paper, author proposed a Wi-Fi shaped microstrip antenna for the RF energy harvesting applications. The proposed antenna is operating at the frequencies 0.9, 1.7, 1.9 & 2.4 GHz. The antenna radiates at the quad-band frequency having an application in GSM Band and Wi-Fi Bands. The antenna consists of four different strips which correspond to each frequency in the result. The co-axial probe is connected from the side of …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 11–19 Read article
-
Ultra-Wideband (UWB) Planar Monopole Antenna Array for Indoor Multimedia Devices
Abstract: AbstractA UWB planar monopole antenna array for indoor multimedia devices is presented. The base work of antenna includes a modified rectangular monopole to cover entire UWB (3.1 to 10.6GHz) and fed with a 50Ω microstrip line. The proposed antenna array is having a compact size of (80*30*1.6mm3) with a spacing of 0.5*lambda between two elements. To exhibit a wider bandwidth, a rectangular cut in the ground plane has been introduced …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 28–35 Read article