Search
22 articles for “Metal working fluids”
-
Separation Trends of Waste Metal Working Fluid from Aqueous Media
Abstract: This paper envisages compiling the scattered available information about the treatment technologies and simple sorption procedures for the removal of waste metal working fluids (MWFs) from machining waste water. Some advantages of sorption technique through agro-waste materials over conventional treatment technologies for the MWFs removal are also the focusing objectives of this paper. Sorbents usually contains various active groups; they are robust and can be the better part of filtration …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 3, Issue 2, 2013 · pp. 45–56 Read article
-
A Technical Review on Evaluation of Vegetable Oil in Water-Emulsion Cutting Fluid in Machining Steel with Coated Carbide Tool
Abstract: In metal cutting industries, Metal working fluids (MWFs) or Metal cutting fluids (MCFs) are used; they act as coolant as well as lubricant. In industries synthetic and petroleum based cutting fluid as well as coolant produce negative effect on human health, ecology and environment. When tool and work piece are engaged with each other while machining due to engagement they produce heat. The metal cutting fluids effect on heat generation …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 26–34 Read article
-
Vegetable Oil as An Eco-Friendly Cutting Fluid for Different Machining Operation: Review
Abstract: AbstractFluids used in machining are used to enhance the production rates and metal cutting quality. Their use causes a threat to environment and also to the worker’s health. So, there is a need to find environmental friendly substitute to conventional mineral oil for fluid used in metal working. Vegetable oil can be used as a metal working fluid because it has certain advantages like good lubrication performance, renewability and biodegradability. …
Published in Research & Reviews : Journal of Ecology · Vol. 4, Issue 3, 2015 · pp. 15–18 Read article
-
Electrical Discharge Machining for Precision Metal Working Industries
Abstract: EDM is called as Electrical Discharge Machining. Otherwise called as Spark Erosion Machining, Electro-Erosion Machining, Spark Machining, and Electro Discharge Machining. It is an unconventional machining process to machine hard metals and alloys. EDM has been a significant machining technique. The electrode, work piece materials, dielectric, and the range of pulse rate, current, and voltage make up the basic EDM process. The dielectric serves the following purposes: it transports removal …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 2, 2023 · pp. 7–11 Read article
-
INVESTIGATION OF THERMAL CONDUCTIVITY OF SILVER NANOPARTICLES IN BASEFULID OF WATER ETHYLENE GLYCOL
Abstract: Nanotechnology is interface technologies that span many different science and applications area.When engineering, science and technology are conducted at the nanoscale is called asnanotechnology. It is about 1 to 100 nm (nano-meter) where nano denotes the scale range of onebillionth of meter. Nanotechnology refers the properties of atoms and molecules measuring 0.1 to1000 nm. Nanofluids are nothing but suspension of nanometer sized particles in the base of fluid.The base fluid …
Published in Journal of Thermal Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 13–19 Read article
-
Effect of Various Dielectric Fluids on Performance of EDM: A Review
Abstract: In electrical discharge machining (EDM), material removal takes place by means of successive electrical discharges occurring between an electrode and a work piece in the presence of dielectric liquid or gas. As dielectric fluid plays very significant role in any electrical discharge machining operation, selection of dielectric medium is an important consideration for EDM performance. It does not only serve to carry away the condensed metal particles from the spark …
Published in Trends in Mechanical Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 55–71 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 859–873 Read article
-
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
Abstract: Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical properties with Zinc. Implants, due to their intricate geometries are difficult to fabricate by conventional manufacturing techniques. Therefore, they are usually fabricated by Additive manufacturing and Powder metallurgy techniques. In the present work, Zinc, Magnesium, manganese and titanium are alloyed using powder metallurgy technique. Vickers micro-hardness, UTM, Zeiss microscopy and Corrosion testing using …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 1–13 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Nano Coolants for Automotive Applications :A Review
Abstract: In recent decades nano coolant has come into play to overcome requirement of better heat transfer because of low thermal conductivity of conventional fluid such as water and ethylene glycol. In the continuation of nano fluids research, presently researchers have also used hybrid nano fluid, which are synthesized by suspending dissimilar nano particles either in mixture or composite form. This article is focused on the experimental and numerical studies carried …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 20, Issue 1, 2018 · pp. 9–22 Read article
-
Enhancing Worker Comfort in High-Heat Environments: A Triangular Bladeless Cooling Fan Approach
Abstract: Workers in high-heat industrial environments frequently encounter thermal stress, fatigue, and dehydration, which significantly impact both productivity and safety. Existing cooling solutions such as pedestal fans, ceiling fans, and central air-cooling systems often fall short due to limited airflow reach, safety concerns from exposed blades, high energy consumption, and poor suitability for dynamic workshop layouts. To address these challenges, this study presents a novel triangular bladeless fan designed specifically for …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 25–31 Read article
-
Influence of Rheological and Physical Properties of Particles and Liquid media to compute Terminal Fall Velocity: A Review
Abstract: The hydrodynamic demeanor of falling particles and the liquid media in which they fall, supported by data analytics, is indispensable in the computation of the terminal falling rate. which is a critical concept in many civil engineering disciplines. The application of terminal settling velocity becomes vital to prevent the settling of microplastic particles (< 5 mm in size), several metal particles, polymers, etc.; especially those of irregular shape. Past research …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 28–40 Read article
-
Experimental Analysis of Cutting Forces Under Different Machining Parameters and Carbide Inserts During Turning of Hardened AISI 4340 Steel
Abstract: Turning of hardened materials with an advanced coated carbide insert has numerous advantages over the grinding process, e.g., reduced process cost, high material removal rate, and less environmental concern due to the elimination of the cutting fluid. Process parameters in conventional machining operations like cutting speed, feed, and depth of cut play the most crucial role behind the generation of heat which also leads to microstructural changes, improved tool life, …
Published in Journal of Polymer & Composites Read article
-
A review on Methodology used for Dry Turning of AISI 52100 Steel
Abstract: Bearing steel like AISI 52100 is one of the most widely used high cutting steel in industry for manufacturing of bearing. A large amount of coolant is used for machining at high speed due to which increase there has been a significant increase in environmental hazards. So Green or Dry manufacturing with optimize cutting parameters and its effect on tool material & work piece quality need to be studied to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 467–475 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Review on Recent Automotive Experimental Applications of Nano Coolants
Abstract: An automotive car radiator consists water and ethylene glycol as conventional coolants for many years Water and ethylene glycol are heat transfer fluids, which have low thermal conductivity and these techniques comes under nanotechnology and with ages of advancement these fluid are known as “nanofluids” which has the speciality higher thermal conductivity than conventional coolants. The mentioned article is highlighted on the research and numeric carried out from pre- researchers …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 9, Issue 1, 2019 · pp. 1–10 Read article
-
Parametric Optimization of CNC Wire Cut EDM for Oil Harden Non-Shrinking Steel: A Comparative Study
Abstract: There has been a rapid growth in the development of harder and difficult to machine metals and newly developed alloys. Conventional machining methods are not suitable and uneconomical for such materials, thus development starts for newer concepts in metal machining. It thus plays a major role in the machining of dies, tools, etc., made of tungsten carbide, hard steel, alloys used in the aeronautics industry. It is a great concern …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 44–58 Read article
-
A Review on Optimization of Surface Roughness during Dry Turning Operation of AISI 1045 Steel
Abstract: It is a well-known fact that manufacturing industries are repeatedly challenged for attaining higher productivity and high-quality products in order to stay competitive. The preferred shape, size and finished ferrous and non-ferrous materials are usually produced through turning with the help of cutting tools that moved past the work piece in a machine tool. From the various cutting processes, turning process is one of the most important and most applied …
Published in Journal of Automobile Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 31–38 Read article