Search
110 articles for “Mechanical stirring”
-
A Mini-Review on Spectral (UV Visible, FT-IR, 1H NMR, GC-MS) Analysis of Various Shaded Dried Leaves Extracts
Abstract: To collect the different types of leaves in various places, wash collected leaves with distilled water and dried these leaves in various processes like under shade dry for 15 days, place oven (45 oC) for 1 hour. Grind well using the above-dried leaves, so these leaves are changed to powder form. Utilize these shaded dried leaves powder, to prepare extract with solvents like methanol, ethanol, hexane, carbon tetrachloride, petroleum ether, …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 13, Issue 1, 2022 · pp. 1–8 Read article
-
Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded AA6061-T6 Joints
Abstract: Friction stir welding is a solid state joining process capable of joining similar and dissimilar materials, initially developed for joining of aluminium alloys. In the present work, the effect of friction stir welding parameters on the microstructure and mechanical properties of aluminium joints is studied. An attempt has been made to investigate the weldability of Al6061-T6 alloy using high speed steel tool in friction stir welding machine. Dye penetration test …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 10–16 Read article
-
Effect of Pin Profile on Microstructure and Mechanical Properties of Friction Stir Welded AZ31B Magnesium Alloy
Abstract: Friction Stir Welding (FSW) is a solid state welding technique which was developed primarily for joining soft metal alloys. The aim of the present work was to develop a defect free friction stir joint of magnesium AZ31B sheets and to investigate the microstructural and mechanical properties of the weld. Two types of tool pins namely cylindrical and truncated conical pin profiled tools have been used to analyze its effect on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 3, 2016 · pp. 1–11 Read article
-
Enhanced Mechanical and Tribological Performance of Magnesium–Boron Carbide Composites Fabricated via Stir Casting for Lightweight Structural Applications
Abstract: This study investigates the fabrication and evaluation of properties of magnesium (Mg) matrix composites reinforced with boron carbide (B₄C) for lightweight structural applications. Stir casting was employed to incorporate B₄C particles at varying weight fractions (0%, 3%, 6%, and 9%) into the magnesium matrix. The influence of B₄C on density, porosity, hardness, tensile strength, and wear resistance was systematically examined. Theoretical density increased from 1.74 g/cm³ (pure Mg) to 1.88 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 29–39 Read article
-
Influence of Tib2 Wt. % on the Microstructural and Mechanical Properties of In-Situ Processed Stir-Cast Metal Matrix Composite of Al-6061
Abstract: Currently, there is an increasing trend in the automotive and aerospace industries towards the adoption of lighter and stronger materials to reduce weight and enhance fuel efficiency. Metal matrix composites must be developed in order to increase the overall performance of automobiles and aircraft as a result of this transition. Among the various composite materials employed, Aluminium Matrix Composites (AMCs) are frequently utilised to meet stringent industrial requirements. The purpose …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 655–661 Read article
-
Experimental Investigations of Mechanical Properties of Friction Stir Welded Joints of Aluminium Alloys AA6063 and AA6082
Abstract: One of the advantages of friction stir welding process is its ability to join dissimilar metals and alloys. The objective of this study was to study the possibility of joining two dissimilar Al alloys, typically A6082 and A6083 using in FSW. In this experiment, joint properties of A6082 and 6063 were studied. Three parameters considered were tool rotation speed, welding speed, depth of cut with three levels; and nine runs …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 2, 2017 · pp. 45–52 Read article
-
Experimental Investigation of Combine Effect of Welding Speed, Tool Pin Profiles and Preheat Temperature on Mechanical Properties of Friction Stir Welded AA6061-T6 Joint based on Response Surface Methodology
Abstract: Two similar of dissimilar material can be joined by Friction stir welding (FSW) in solid state. Friction stir welded joint can be made by using non-consumable tool with rotary and transverse motion with intimate contact to material to be welded. These experimental investigations was carried out by taking different FSW parameters tool rotation speed, tool travel speed, tool pin profile and preheat temperature to find out its effect on mechanical …
Published in Trends in Machine design · Vol. 4, Issue 2, 2017 · pp. 15–24 Read article
-
Investigation of Mechanical Properties of Friction Stir Welded AA6063 Joints
Abstract: Friction Stir Welding is often referred as the joining technology of next generation because of its multiple advantages over the existing conventional processes. It is a solid state joining process which is free from the requirement of filler wire, consumable material, harmful gaseous emissions and also provides smooth surface with better surface finish. Moreover since no third additive material is involved hence, the microstructure of the welded joint also bears …
Published in Journal of Industrial Safety Engineering · Vol. 4, Issue 2, 2017 · pp. 1–4 Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
Experimental Investigations on Aluminium Composites Materials Using Stir Casting Process
Abstract: In physical operations, accoutrements in motorcars and aeronautical machine factors, aluminium and its alloys are extensively used. In this study an effort is made to ameliorate the properties of aluminium essence matrix compound (A356) for manufacturing of machine rudiments taking High Tensile strength, Hardness, Wear resistance and low coefficient of friction, aluminium alloy (A356) reinforced with aluminium oxide, graphite and silicon carbide. In the current work, A356 as base metal …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 302–323 Read article
-
Processing of Magnesium Metal Matrix Composite Reinforced with Graphene Nano Platelets through Vacuum Stir Casting and Investigating its Mechanical Behaviour
Abstract: AbstractThe application of metal matrix composites (MMCs) as structural engineering materials has received increasing attention in recent years. Their high strength and toughness at elevated temperatures coupled with low-density makes them suitable for use in applications where conventional engineering materials, such as steel are used. MMCs exhibit significantly higher stiffness and mechanical strength compared to matrix alloys, but often suffer from lower ductility and interior fracture toughness. MMCs have the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 21–29 Read article
-
A Review on an Investigation on the Effect of Immersed Medium in Friction Stir Welding of Aluminium Alloys (AA 6061-T6)
Abstract: Friction stir welding is solid state welding technology used for welding of low melting point metals such as Al, Mg and its alloys. FSW process can be controlled by different parameters like rotational speed, feed rate and welding medium. In this process, a cylindrical non-consumable tool, with a profiled probe (pin) rotating about its own axis is slowly plunged into the abutting edges of work pieces rigidly clamped to a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 1, 2017 · pp. 9–16 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 833–848 Read article
-
Enhancement of Mechanical Properties in Eutectic Al-Si Alloy Matrix Composites Reinforced with Kyanite and Graphite via Stir Casting
Abstract: The purpose of this work is to enhance the mechanical performance of a eutectic Al–Si alloy by incorporating hard ceramic (kyanite) and soft solid lubricant (graphite) reinforcements using a liquid-state stir casting route. Metal matrix composites were fabricated with kyanite contents of 2, 4, and 6 wt.% and a constant 2.5 wt.% graphite. Their microstructures and mechanical properties were systematically evaluated. The microstructure was examined using optical microscopy and energy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 90–100 Read article
-
Microstructural, Mechanical and Strengthening Mechanisms of Al7075 Metal Matrix Composite with Al2O3 Nano Particle Processed Through Ultrasonic Cavitation Assisted Stir-casting
Abstract: In this investigation, we produced Al7075 matrix composites using a stir casting method enhanced by ultra-sonic cavitation, reinforcing them with nano-Al2O3 particles. The SEM microstructural analysis confirmed the presence of nano-Al2O3 particles in all the composites, showcasing their consistent particle size and reasonably even distribution within the matrix. Optical microscopic examinations revealed that the presence of nano-Al2O3 particles, along with the aggressive ultrasonic cavitation effect, resulted in grain refinement in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 31–43 Read article
-
Mechanical and Micro-structural Properties of Friction Stir Welded Dissimilar Joints of Aluminium Alloys
Abstract: Abstract In this work, the microstructure and mechanical properties of friction stir welded dissimilar joints of 6101-to-6063 aluminium alloys were evaluated. Tool with round pin profile was fabricated of high speed steel material which was suitable for friction stir welding of aluminium alloys. Under monotonic tensile loading, an increase in the joint strength was observed with the increase in the tool rotational speed. The micro-hardness of friction stir zone increased …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 2, 2017 · pp. 16–22 Read article
-
Investigation of microstructure and mechanical properties of multi-pass friction stir processing on precipitation hardened aluminum alloy
Abstract: In the present study, multi-pass friction stir processing of aluminum AA2014-T651 alloy is per-formed with one and four passes. The multi-pass processing is performed at a tool rotational speed of 1000 rpm with a traverse speed of 63 mm/min. Microstructural characterization of fric-tion stir processed specimens indicated a significant grain refinement with equiaxed grains in the four pass specimen. Microhardness and tensile strength of the multi-pass specimen decreases with the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 339–349 Read article
-
Effect of CNTs on Mechanical Properties of Mg-CNT Nano Composites Synthesized Through Stir Casting
Abstract: Multi-wall carbon nanotubes (MWCNTs) reinforced magnesium (Mg) nano composites were synthesized using vacuum stir casting technique. Three different weight fractions of MWCNTs (0.33, 0.66, 0.99 wt%) are added with Mg melt and stirred at 450 rpm for 10 min to obtain homogeneous mixture and deposited in a metallic mould. The deposited composite is then extruded at 450oC with an extrusion ratio of 11.11. Samples are prepared from the extruded composite …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 5, Issue 3, 2015 · pp. 60–66 Read article