Search
21 articles for “Magnesium alloy”
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Process Parameter Optimization of Magnesium Alloy Material Welded by Friction Stir Welding Using UTM and Taghuchi Approach
Abstract: Welding is a fabrication process where materials are fused together which may similar or dissimilar according to requirement. Welding is a systematic approach where dissimilar and similar materials are welded with an application of heat. Friction stir welding (FSW) is a welding method where metals are converting to a molten phase and with a desirable application of pressure leads to metal joining. FSW is a metal joining process used in …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 381–392 Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
The Effect of Welding Parameter and Tool Geometry on Mechanical Properties of RZ5-10wt%TiC FSW Joint
Abstract: Friction Stir Welding (FSW) of metal matrix composite (MMC) provides the grain refinement and reinforcement redistribution of the composite used for wide application in aerospace and structural. This wide application needs development of best-suited joining process for MMC which is complicated to unite by the traditional welding process. The paper observed the consequence of the welding parameter and tools’ geometry on the mechanical properties of the friction stir butt welded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article
-
A Survey on Hydrogen Storage System using Composite Material and its Alloys
Abstract: The transition to a carbon-neutral energy landscape hinges on the ability to store hydrogen safely, densely, and reversibly. While high-pressure tanks and cryogenic vessels dominate today’s infrastructure, solid-state storage in metallic alloys offers a compelling alternative by combining high gravimetric capacity with intrinsic safety to form a composite material. This work presents a systematic investigation of a family of reversible hydrogen-absorbing composite material alloys—principally Mg-based intermetallics (Mg₂Ni, MgFeMn) and TiV-based …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 28, Issue 2, 2025 Read article
-
A Review on The Role of Nanoparticles in Modifying Mg Alloys and Composites
Abstract: Reviewing and assessing magnesium's uses in the automobile sector, which have the potential to greatly improve fuel efficiency and environmental preservation, is the goal of this study. The report provides an overview of magnesium alloys' present benefits, drawbacks, technological obstacles, and future prospects in the automobile sector. The development of magnesium matrix composites has advanced to a new level thanks to the magnesium matrix nanocomposites' exceptional mechanical qualities. Dispersing nanoparticles …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 24–32 Read article
-
Weldability of Aluminum Alloy Using Pulsed current Tungsten Inert Gas Welding Process forMechanical Properties: A Review
Abstract: In the TIG welding, also known as gas tungsten arc welding, metal components are bonded by applying heat or pressure. Inert gas is used in pulsed current welding to encapsulate the electrodes and weld pools. Tungsten inert gas is used in the complex welding process known as TIG welding. It alternates between amps operating at high and low levels. Here, increasing the current results in improved power production and weld …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 1, 2024 · pp. 28–37 Read article
-
A Comprehensive Review of Magnesium Matrix Composites (MMCs) and Its Manufacturing Techniques
Abstract: Magnesium matrix composites (MMCs) can overcome the mechanical properties of magnesium alloys by adding reinforcements. These MMCs have properties of hydrogen storage, high specific stiffness and strength, superior dimensional stability, exceptional shock absorption capability, and excellent electromagnetic shielding. No other component can compare with these unique and remarkable capabilities. In recent days, the MMCs have become more attractive in many industries, like aerospace, defense, automotive, electronic packaging and also in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1040–1050 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article
-
Analysis of Thermal Performance Improvement of Engine Fins by Varying the Materials and Profiles Used at High Temperatures
Abstract: In this thesis, we will design fins using various profiles and materials to identify the optimal combination for a 100cc engine. We will also test different materials for fins to evaluate the engine's heat efficiency. Our study will involve a comparison between the optimized fins and the original aluminum fins currently used. To ensure the optimal performance of the 100cc engine, we will utilize advanced analytical software to thoroughly analyze …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 Read article
-
Review on Severe Plastic Deformation Techniques for Bulk Materials: Deformation Behavior and Properties
Abstract: This paper presents a detailed review of the efficient application of Severe Plastic Deformation for the fabrication of ultra-fine-grained and nanostructured crystalline bulk materials. Severe Plastic Deformation allows substantial grain refinement while largely preserving the original dimensions of the workpiece, making it especially suitable for ductile materials capable of sustaining very high strains under elevated hydrostatic pressure prior to failure. The study investigates the grain refinement mechanisms involved in Severe …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 40–72 Read article
-
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
Abstract: Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical properties with Zinc. Implants, due to their intricate geometries are difficult to fabricate by conventional manufacturing techniques. Therefore, they are usually fabricated by Additive manufacturing and Powder metallurgy techniques. In the present work, Zinc, Magnesium, manganese and titanium are alloyed using powder metallurgy technique. Vickers micro-hardness, UTM, Zeiss microscopy and Corrosion testing using …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 1–13 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Analysis of Friction Stir Welding Utilizing ANSYS: A Study Based on Simulation
Abstract: Friction Stir Welding (FSW) represents a sophisticated solid-state welding methodology that has attracted considerable scholarly attention due to its efficacy in amalgamating high-strength, lightweight substrates including aluminium, magnesium, and titanium alloys. FSW enables the fabrication of defect free products with a substantial amount of mechanical and wear properties. The process is highly sensitive to various parameters that significantly influence the quality and strength of the final product. Studies have shown …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 62–77 Read article
-
An overview of dissimilar metals welding by cold metal transfer technique
Abstract: Cold Metal Transfer (CMT) welding has emerged as a promising technique for joining dissimilar materials, offering enhanced weld quality and mechanical properties. This review article explores the application of CMT welding in joining different metal alloys, focusing on two significant cases: magnesium-aluminium and aluminium-stainless steel combinations. CMT welding minimizes intermetallic compound formation and produces high-strength joints in magnesium-aluminium combinations. CMT welding with a friction-surfaced aluminum coating offers strong metallurgical bonding …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 167–174 Read article
-
A Brief Review on Interfaces of Copper Welded to Different Materials
Abstract: In engineering applications, three metals with high conductivity are primarily used such as copper (Cu), aluminium (Al), and silver (Ag). Each has its unique set of properties that affect specific engineering applications. Infact the choice of conductor depends on a mixture of cost, technical parameters, and environmental conditions. Among these, Copper is widely valued in engineering applications due to its antimicrobial property, excellent electrical (about 100% IACS) and thermal conductivity, …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 25–36 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Wear Behavior and Mechanical Characterization of Pure Aluminum Reinforced with RHA by Using Powder Metallurgy Method
Abstract: In recent years, composites made from aluminum and its alloys have gained significant attention due to their optimal blend of low weight, high strength, impressive toughness, enhanced thermal stability, straightforward casting processes, superior corrosion resistance, and availability compared to unreinforced aluminum and its alloys. These aluminum-based composites are widely utilized in producing components for industries such as automotive, aerospace, marine, and nuclear. Rice husk ash (RHA) is a fine, powdery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 495–502 Read article