Search
33 articles for “Jute fibers”
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Interfacial Bonding Efficiency in Jute-Carbon Fiber Polyester Matrix Composites Evaluated Through Short Beam Shear and Interlaminar Fracture Toughness Testing
Abstract: The natural Fiber–synthetic Fiber hybrid composites are jute–carbon Fiber hybrid in polyester matrix which could be used in semi-structural applications of automotive, construction and marine industry as an eco-friendly and cost-effective alternative of conventional carbon Fiber reinforced polymer. But the hydrophilic nature of jute Fibers and the relatively inert surface of carbon Fiber's cause weak bonding at the interface of the polyester matrix, which causes premature delamination, poor interlaminar shear …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Investigation of Mechanical Properties of Jute and Bamboo Natural Fiber Composites
Abstract: Natural fibers have become increasingly popular in recent decades. Natural fiber composites are also becoming increasingly popular in a various industries, including automobiles, furniture, packaging, construction and sports. Natural fibers have several advantages over synthetic fibers, including low cost, low density, reduced damage to processing equipment, good relative mechanical properties, renewability, and biodegradability. Natural fibers were also introduced with the goal of producing lighter composites, and they have shown a …
Published in Journal of Production Research & Management Read article
-
Mechanical Property Assessment of Hybrid Composite Laminates Composed of Jute Glass Fibers in Combination with Flax, Hemp, Sisal and Kenaf Fibers Using the Hand Layup Technique
Abstract: The present work compares the properties of various hybrid composite laminates manufactured using the hand layup technique and addresses their production process, based on glass fiber as the exterior layer and natural fibers (flax, hemp, kenaf, jute, and sisal) as interior layers, in an epoxy resin. Five stacking sequences A-GJJJJG, B-GFJJFG, C-GHJJHG, D-GKJJKG, and E-GJSSJG were used to prepare the test specimens. According to ASTM guidelines, experiments were performed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 103–113 Read article
-
Evaluating the Effect of Carbon Fillers on the Mechanical Properties of Jute and Epoxy Composite Wind Turbine Blades
Abstract: Natural fibers are a sustainable substitute for synthetic materials because of many benefits, which include light weight, biodegradability, renewability, and affordability. An approach to sustainable blade design that shows promise is its use into wind turbine blades. The study focuses on jute/epoxy composite's tensile strength, impact strength, water absorption, void fraction and degradation with carbon fillers and apply in making small wind turbine blades. To fabricate the composites, two jute …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–203 Read article
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Fabrication of Natural Fibre Reinforced Polymer Composite by Hand Lay-Up Process
Abstract: The recent development in technologies has increased the usage of non-renewable resources during pro- duction due to remarkable properties. However, it has been a threat and unable to be replenished once used. In addition to this, natural fibre strengthens in a more significant way and it’s widely applicable in polymer composites materials. Furthermore, the use of plant fibres in polymer composites is due to its low cost and significant properties. …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 13–19 Read article
-
Effect of Carbon Nanotube on Mechanical Properties of Jute Fibre Reinforced Polyester Composite
Abstract: The current study studies how carbon nanotubes affect the mechanical characteristics of polyester composites reinforced with jute fiber, both treated and unprocessed. Alkali was used to cure jute textiles. Composites with treated and untreated jute fibre with 5%, 10% and 15% jute fibre loading with and without carbon nanotube were prepared using hand lay-up process. Carbon nanotubes varied from 0.2%, 0.4% and 0.6%. Tensile, flexural, and strength of impact all …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 1–9 Read article
-
Design and Development of Fiber Sandwiched Composite Materials for the Improvement of Mechanical Properties
Abstract: This research paper presents the development and mechanical characterization of fiber sandwiched composite materials (FSCM) to address the increasing demand for high-strength, lightweight, and corrosion-resistant materials in advanced engineering sectors such as automotive, aerospace, and transportation industries. Traditional homogeneous materials such as metals, ceramics, and polymers often fail to provide a balanced combination of properties like high tensile strength, low density, toughness, abrasion resistance, and impact resistance needed for modern …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 22–37 Read article
-
Study of a Mist Enhanced Evaporative Cooler
Abstract: Comfort air conditioning through vapour-compression refrigeration is commonly used and is the energy-intensive system. That to split air conditioning system is being employed to create cooling in closed spaces which lag in fresh air supply leading to an increase in carbon dioxide concentration in the cooled space. This is of very much concern towards to maintain indoor air quality. Evaporative Cooling (or Desert Cooling) concept is also a known phenomenon …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 3, 2025 · pp. 1–13 Read article
-
Design And Analysis of Carbon Filler Reinforced Composite Small Wind Turbine Blades
Abstract: Although wind turbines have great potential for capturing wind energy, their blades suffer from unstable aerodynamic loads as a result of operating for extended time in challenging conditions. Both structural and aerodynamic performance are negatively impacted by these loads. The effectiveness of the wind turbine and the use of wind energy are significantly impacted by the choice airfoil. Commonly used airfoils include NACA 4412, NACA 23012, and SG6043. The lift …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 79–89 Read article
-
Thermal and Microstructural Evaluation of Natural-Glass Fiber Hybrid Composites: Sustainable Alternatives to Synthetic Materials
Abstract: The scope of engineering requirements for composite materials, which mix features from several elements engaged in engineering applications to enable greater performance, cannot be adequately understood in this way. The most recent of these materials are hybrid composites, which combine synthetic and natural fibers, particularly glass fibers, and are anticipated to create new, promising materials in terms of their ties to cost, performance, and consistency. From the perspective of their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1275–1285 Read article
-
Evaluating The Durability and Environmental Sustainability of Hybrid Natural - Synthetic Fiber Composites
Abstract: This study examines the characteristics of hybrid composites composed of natural fibers (such as jute, hemp, or kenaf) and synthetic fibers (such as glass or carbon) integrated within polymer matrices. The hybridization method seeks to enhance the advantages of both fiber types, hence augmenting overall performance relative to single-reinforced composites. Mechanical properties like tensile strength, flexural strength, impact resistance and hardness were evaluated through experimental tests. The results demonstrate that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 93–102 Read article
-
Modelling -Based Evaluation of Hybrid Natural Synthetic Fiber Polymer Composites for Sustainable Energy Applications
Abstract: The growing need of lightweight, high-performance, and green energy system materials has increased the research on hybrid polymer composites. This paper gives a modelling-based evaluation of polymer matrix composites which are reinforced using natural fibers like jute, sisal, bamboo in a combination with synthetic glass fibers to be used in sustainable energy sources. An analytical model has been used to assess the effect of hybrid fiber composition on mechanical, thermal, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 682–688 Read article
-
Mechanical and Morphological Analysis of Jute/Manila Hemp Hybrid Composites for Enhanced Structural Performance
Abstract: Natural fiber composites are renowned for their lightweight, strength, corrosion resistance, and high strength-to-weight ratio, often surpassing traditional metals. Despite challenges such as poor fiber-matrix adhesion and moisture susceptibility, hybridizing composites present a viable solution by enabling tailored properties for optimal performance. This study investigates hand-lay-up processed natural fiber composites, specifically woven jute/epoxy, non-woven manila hemp/epoxy, and their hybrid variants. Extensive testing was conducted on mechanical properties including hardness, flexural …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 1–11 Read article
-
An Overview of Natural Fibers and Fillers Reinforced Polymer Composite Materials
Abstract: Polymer composite materials reinforced with natural fibers and fillers are drawing wide spread attention due to their sustainability, eco-friendliness, and a replacement of conventional synthetic composites. Such materials combine strength and stiffness of natural fibers like jute, hemp, flax, and sisal with flexibility and durability of polymer matrices, including thermoplastics, and thermosets. The paper reviews some developments, properties, and applications of natural fiber-reinforced polymer composites (NFRPCs), focusing on their merits, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 78–92 Read article
-
Sustainable Polymer Composites Reinforced with Natural Fibers: Processing, Properties, and Applications
Abstract: The environmental footprint of synthetic plastics has led to extensive studies of sustainable polymer composites reinforced with natural fibers like jute, sisal, hemp, flax, and coir. These biocomposites offer a greener solution to the conventional petroleum-based materials, which blends biodegradability and competitive mechanical characteristics. The present paper focuses on the processing methods, mechanical and thermal characteristics, and the possible application of natural fiber-reinforced polymer composites (NFRPCs). A survey of 50 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1663–1670 Read article
-
Management of Green Composite for Clean and Green Energy Conversion with Thermal Analysis: Fiber Reinforcement Composites
Abstract: Using green composite materials helps people identify better, more environmentally responsible options to synthetic polymers. Depending on the state of the material and additions, green composites that are used for clean energy are lighter than ordinary metals that carry heat quickly. These methods test fiber-reinforced composites in diverse conditions using heat analysis and then do a thorough method analysis. The composites have a polymer matrix that is healthy for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 900–905 Read article
-
Enhancing Performance of Hybrid Natural Fiber Reinforced Polymer: Insights into Processing, Characterization and Machining
Abstract: Natural fibre reinforced polymer composites (N-FRP) have gained popularity in recent years as an alternative to regular polymer composites, owing to growing environmental concerns. Natural fibers are becoming increasingly popular due to their outstanding properties such as flexibility, strength, compatibility with living creatures, and impact resistance. A notable application of natural fibers is in the medical industry, with the goal of producing cost-effective, sustainable, and long-lasting products. Combining different fibers …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 139–153 Read article