Search
67 articles for “Hybrid Layer”
-
Eco-Friendly Tri-Layer Hybrid Composites: A Sustainable Approach to Polymer Matrix Materials
Abstract: In the current study, we explored the use of environmentally friendly natural fibers such as sisal, banana, and kevlar. These fibers were fabricated by hand lay-up technique, and their impact on tensile and dynamic properties was evaluated according to ASTM standards. The assessment was conducted under both dry and wet conditions, considering two different chemical dosage parameters for comparison. Additionally, the tri-layer fibers underwent two separate chemical treatments using 1% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 195–205 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal-polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Physicochemical Transitions and Polymerization Dynamics in Multi-Generational Dentin Adhesives: A Critical Review of the Resin-Dentin Composite Interface
Abstract: Adhesive dentistry has undergone a transformative refinement over the past three decades, transitioning from technique-sensitive, multi-step etch-and-rinse protocols to streamlined universal formulations. This narrative review critically synthesizes evidence from thirty peer-reviewed investigations to evaluate the evolution of dentin bonding agents from the fourth through the eighth generations. The analysis places particular emphasis on the physicochemical dynamics of the resin-dentin interface, including interfacial bond strength metrics, marginal integrity, and microleakage behavior. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 209–228 Read article
-
Development and Experimental Investigation of a Light Weight Hybrid Electric Vehicle Using Lithium-Ion Battery and EDLC Supercapacitor Integration
Abstract: Lightweight hybrid electric vehicles (HEVs) have gained significant attention as an environmentally friendly and efficient mode of transportation. However, their energy storage systems (ESS) often face challenges such as limited battery lifespan, inadequate power delivery during peak demand, and inefficient energy recovery during braking. This research focuses on the development and experimental evaluation of a hybrid energy storage system (HESS) integrating Lithium-Ion Batteries (LIB) and Electric Double-Layer Capacitors (EDLC) for …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 26–40 Read article
-
Recent Advancements and Layering Techniques in Nanoparticle-Reinforced Hybrid Composites: A Comprehensive Analysis
Abstract: This review examines the advancements in nanoparticle-reinforced fiber composites, focusing on natural fibers, synthetic fibers, hybrid composites, and fiber metal laminates (FMLs). Nanoparticles such as SiO₂, TiO₂, Al₂O₃, and graphene, introduced at 0.5–3% volume, have significantly enhanced mechanical, thermal, and wear properties. Comparative studies reveal that hybrid composites reinforced with 1–2% nanoparticles show a 20-30% increase in tensile strength and a 15-25% improvement in thermal stability compared to non-reinforced composites. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 83–89 Read article
-
Failure Analysis of Hybrid Natural/Synthetic Fiber Composite Laminates in The Application of Hybrid Composite Pressure Vessel
Abstract: Composite laminates are frequently utilized in multiple sectors. The growing complexity of composites in aircraft applications necessitates hybridization of these materials. These hybrid laminates consist the combination of one natural fiber and two selected synthetic fibers. This work investigates three different six-layer hybrid composite laminate combinations: Jute2/Carbon2/Jute2, Jute2/Glass2/Jute2, and Carbon2/Glass2/Carbon2, with helix angles of 0° and 90° and a volume fraction of 50% fiber content. Each specimen is fabricated utilizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 85–98 Read article
-
Comparative Assessment of Conversion Degree, Resin Tag Depth, and Mineral Deposition in Adhesive Resin Enhanced with Inorganic Nanofillers such as Cerium Dioxide and Tantalum Oxide Nanoparticles
Abstract: The World Health Organization (WHO) characterizes dental caries as the deterioration of tooth enamel resulting from acids generated by microbial activity on carbohydrates. Untreated dental caries can lead to pain, eating and sleeping difficulties, and systemic health issues, ultimately diminishing the quality-of-life Composite restorative materials moderately became one of the most used restorative materials for anterior restorations and also is used more extensively for restoring posterior teeth which are having …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 110–118 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Experimental Investigation of Tensile Strength of Bamboo Fiber/Synthetic Glass Fiber
Abstract: In this work, hybrid fiber reinforced composites (HFRCs) with enhanced mechanical and physical characteristics are created by reinforcing composite laminates using a blend of natural bamboo fiber and synthetic glass fiber. The primary goal of the inquiry is to assess these composites' tensile and impact properties. In comparison to non-hybrid composites, the hybrid composite, which consists of two layers of bamboo fiber and one layer of bidirectional glass fiber, had …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1700–1710 Read article
-
Numerical Investigation on Medium Velocity Impact Response of Hybrid Metal Matrix Composite Laminate
Abstract: The current investigation centers on examining the numerical analysis of a hybrid metal matrix composite laminate resulting from impacts inflicted by diverse projectiles on the composite structure. Composite materials are chosen based on their inherent properties and compatibility in terms of bonding with other materials, forming the layers for the hybrid metal matrix composite. The fiber taken for the research paper was Kevlar and Sisal because they both bear good …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 346–358 Read article
-
Integrating RF Technologies for Robust Disaster Response and Recovery Systems
Abstract: In the aftermath of disasters, one of the greatest challenges is the failure of communication networks, which delays rescue operations and worsens human suffering. Radio Frequency (RF) technologies offer promising solutions as they enable wireless communication, sensing, and tracking without depending on fragile infrastructure. This paper presents a study of RF applications in disaster management and proposes a unique hybrid multi-layer framework that integrates environmental RF sensors, RFID-based tracking, drone-mounted …
Published in International Journal of Radio Frequency Innovations · Vol. 3, Issue 2, 2025 · pp. 24–27 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
An Overview on MOSFET based Sensor Design
Abstract: In the past two decades the MOSFET has transformed from a simple switch in digital logic to an analog powerhouse that can be cofabricated with the sensing material on a single chip. MetalOxideSemiconductor FieldEffect Transistors (MOSFETs) have silently become the beating heart of modern sensor platforms, translating the faint whispers of physical, chemical, and biological phenomena into robust electrical signatures. This abstract surveys the latest advances that have turned the …
Published in Journal of Microelectronics and Solid State Devices · Vol. 13, Issue 1, 2026 · pp. 20–26 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Mechanisms of Crystal Growth: From Spiral Steps to Surface Adhesion
Abstract: Crystal growth is a complex interplay between thermodynamic stability and kinetic processes, influenced heavily by the conditions under which crystallization occurs—particularly the degree of supersaturation. This abstract outline three principal regimes of solution-grown crystal growth: defect-driven, two-dimensional, and adhesive growth. At low supersaturation, growth is facilitated at surface defects, such as screw dislocations, where energy barriers to attachment are minimized. This results in the formation of spiraling steps that propagate …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 1, 2025 · pp. 46–31 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
Bridging Brain-Inspired Learning and Quantum Reasoning for Future AGI Systems
Abstract: This research paper presents a novel neuromorphic–quantum hybrid computing framework envisioned to advance intelligent systems toward artificial general intelligence. The architecture integrates brain-inspired spiking networks for adaptive, energy-efficient learning with quantum processors for non-classical optimization and reasoning. A shared synaptic–quantum memory layer enables dual information representation, while neuromorphic adaptive controllers provide real-time stabilization of noisy quantum circuits. While quantum processors offer features like superposition- enabled exploration and entanglement-based correlations that …
Published in Current Trends in Signal Processing · Vol. 16, Issue 1, 2026 Read article