Search
42 articles for “Heat treatment”
-
Simulation and Experimental Analysis of Heat Treatment for Steel Tie Rods: A Review
Abstract: The study is related to the actual heat treatment and simulation of the physical deformation of the steel tie rod and compares the observations for process optimization. The general methodology is to go for either traditional or induction hardening after getting the chemical composition of the material, followed by tempering, which is a key technique for improving the mechanical properties of materials, strength, hardness, etc., and to release stresses. This …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 43–51 Read article
-
Heat Treatment Research Studies of EN9 Carbon Steel by Quenching Operation in Different Quenching Media
Abstract: In this experimental research, EN9 type of steels is selected to process the heat treatment by quenching to increase the hardenability of a material. EN9 steel is cut into small work samples with diameter 25mm and length 15mm to analyze. Then they are polished the cut surface in a fine manner. Microstructure and hardness are to be found for EN9 work pieces before heat treatment at different locations like at …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 1, Issue 2, 2023 · pp. 1–25 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Effect of Solution Heat Treatment and Aging on the tensile Properties of Ti-6Al-4V Alloy Component Manufactured by Wire Arc Additive Manufacturing
Abstract: Wire Arc Additive Manufacturing (WAAM) is a cost-effective technique for fabricating components from the Ti-6Al-4V alloy, known for its high strength and utility in demanding applications. To maximize its strength, the alloy undergoes Solution Treating and Aging heat treatment, comprising three key steps: (i) Solution Treating: The alloy is heated to 950°C (just below the β transus) and held for 1 hour, increasing the β phase proportion. This step sets …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 2, 2025 · pp. 1–6 Read article
-
Fracture behavior of 2124Al- 10vol% SiCp composite tensile specimens for different heat treatment conditions
Abstract: This article presents experimental details on 2124Al-10vol% SiCp composite tensile specimens, which were made by squeeze casting process. Cast metal composites are generally very brittle and have poor mechanical properties. To strengthen the matrix and improve ductility, the specimens were heat-treated by solutionizing and aging. Experiments were carried out at 3 different solutionizing temperatures, solutionizing time, aging temperature and aging time to examine the influence of heat treatment process parameters …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 279–291 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Corrosion Characterisation of Low Alloy CrMoV Steel Before and After Cryogenic Heat Therapy
Abstract: Low alloy CrMoV steel is used in Turbine wheels, Distance pieces, Compressor aft shafts etc of Gas Turbines. Cryogenic heat treatment was used to examine the effects on the corrosion resistance of low alloy CrMoV steel. In order to eliminate residual stresses and boost wear resistance in steels and other metal alloys, cryogenic heat treatment (CHT) employs cryogenic temperatures (i.e., below - 190°C) to treat work parts. Cryogenic treatment is …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 63–73 Read article
-
Development and Comparative Study of Aluminium- Copper Metal Based Composite Through Different Routes
Abstract: The aim of this study is to develop aluminium-copper composite through powder metallurgy technique. Powder metallurgy is an art or technology which can produce exact dimension of final roducts utilizing less energy. Copper oxide (CuO) was used as the source of copper, which was extracted through a reduction process using dextrose. The reaction was thoroughly examined and reported. Commercially available aluminium powder served as source of the aluminium. Aluminium- copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 19–32 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Thermal and Mechanical Properties of Zn-Fap Composites
Abstract: The aerospace and automotive industries have experienced a substantial surge in interest in innovative composite systems driven by the ongoing demand for lightweight, high-performance materials. In this study, the mechanical properties of zinc (Zn) matrix composites reinforced with fluorapatite particles (Fap) are examined as a function of thermal treatment. Within the context of this investigation, we endeavoured to create composite materials containing Zinc-Fluorapatite powder. Stir casting was used to produce …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1101–1110 Read article
-
Service Life Improvement Analysis of Cryogenically Treated Blanking Punch
Abstract: After traditional heat treatment, Cryogenic treatment is carried out as a secondary process to improve the hardness and wear resistance of tool steels. The researchers have already studied and it is well published the potential use of cryogenic treatment of AISI D2 tool steel under laboratory conditions. However, to ensure the sustainable use of this technology for industrial application, its analysis is essential. Therefore, in this work a small scale …
Published in Trends in Mechanical Engineering & Technology Read article
-
Incorporating Material Fatigue Parameter Determine in The Rolling & Sliding Contact Fatigue Analysis of Gears
Abstract: As the material's intricate stresses and strains are always shifting during phases of loading, determining the predicted equipment working under rolling-sliding contact loads and their fatigue lives (wheels, bearings, and gears) is particularly difficult. Another difficulty is not knowing the precise characteristics of the material used to make the components, which is particularly noticeable. when it comes to heat-treated components, where the material characteristics' values can differ greatly among the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 1–5 Read article
-
Deformation and Densification Behaviour of Sintered Aluminium Alloy and Chromium Carbide Metal Matrix Preforms
Abstract: This paper presents comprehensive experimental results focused on the deformation and densification behavior of sintered AA2618 - 2% Cr3C2 metal matrix preforms. The study specifically examines preforms with varying aspect ratios subjected to a cold upsetting process. To create the powder preforms, an initial theoretical density of 89% was achieved using a cylindrical die on a 600 kN hydraulic press. The sintering process was conducted in an electric muffle furnace, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 125–131 Read article
-
Milk Allergy: Significance, Detection and Management
Abstract: Milk allergy is a significant public health issue, particularly among infants and young children, with prevalence rates between 2 and 6% in early childhood, declining to 0.1–0.5% in adulthood. It is an immune-mediated adverse reaction to milk proteins, primarily involving immunoglobulin E (IgE)-mediated responses. Symptoms range from gastrointestinal distress and respiratory complications to severe anaphylaxis. The etiology of milk allergy involves genetic predisposition, environmental factors, an immature immune system, and …
Published in Research and Reviews : Journal of Dairy Science and Technology · Vol. 14, Issue 1, 2025 · pp. 15–19 Read article
-
Phase Transformation of Manganese Steel: A Role of Alloying Elements
Abstract: Low alloyed steels that are both strong and ductile are the primary focus of new material concept work due to economic considerations. One key to making good use of these materials is applying the right heat and thermo mechanical treatments. Phase transitions can be influenced by using different alloying procedures. Microstructural evolution and mechanical characteristics were investigated in relation to varying manganese, silicon, and chromium levels. Developing high-strength flat rolled …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 15–20 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Comprehensive Review on Sterilization Methods and Material Considerations
Abstract: The problem of environmental contamination, which is important for both public health and the economy, has been addressed through a great deal of research on the sterilization and disinfection of pollutants and microorganisms. Many types of pollutants and hazardous materials, such as microorganisms and toxic gases, are discharged into the environment and can enter the human body through ingestion, adsorption, or inhalation. Numerous respiratory conditions, strokes, lung cancer, and heart …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 2, 2025 · pp. 25–32 Read article
-
Revolutionizing Energy Systems: The Impact of Steam and Its Technological Evolution
Abstract: The problem of environmental contamination, which is important for both public health and the economy, has been addressed through a great deal of research on the sterilization and disinfection of pollutants and microorganisms. Many types of pollutants and hazardous materials, such as microorganisms and toxic gases, are discharged into the environment and can enter the human body through ingestion, adsorption, or inhalation. Numerous respiratory conditions, strokes, lung cancer, and heart …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 2, 2025 Read article
-
Effectiveness of Moist Heat Application on Elderly Orthopedic Clients at Selected Urban Community Area, Bengaluru
Abstract: Pain is a distressing sensory and emotional experience that arises from actual or potential tissue damage. It is a multifaceted phenomenon that extends beyond physical discomfort, encompassing emotional and psychological aspects as well. Individuals who recognize that pain management not only enhances comfort but also accelerates the healing process are more inclined to seek or administer appropriate treatment. In order to educate the elderly orthopedic clients, this study was conducted …
Published in International Journal of Orthopedic Nursing and Practices · Vol. 3, Issue 1, 2025 · pp. 18–22 Read article