Search
82 articles for “Heat transfer coefficients”
-
The Effect of CNT Coating on Convective Heat Transfer Coefficient, Heat Flux, Roughness, Pressure Drop of Porous Material with 3-Omega Technique: A Review
Abstract: The paper deals with the tentative survey on the heat transfer and pressure drop characteristics of CNT glaze on a stainless steel substrate in a rectangular comprehensive channel with water as the working fluid. The extremely high thermal conductivity of individual carbon nanotubes was predicted hypothetically and pragmatic experimentally. Under both, laminar and turbulent flow conditions, the experiments were conducted with Reynolds number unpredictable from 500–2600. A nanofluid, which depends …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 18, Issue 3, 2016 · pp. 5–8 Read article
-
Dependency of pure liquid pool boiling heat transfer coefficient to bubble contact angle on roughened Brass heater in new model
Abstract: Heat transfer coefficient of nucleate pool boiling Nucleation is a basic part of phase transformations, which plays an important role in understanding and describing any phase change processes. For a boiling process, nucleation appears in the initial stage, and directly affects bubble formation and boiling intensity. According to the heterophase fluctuations which induce phase transition, the phase change has two main types. Classically, phase change caused by the fluctuation with …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 2, 2022 · pp. 29–36 Read article
-
Determination of Heat Transfer Coefficient in Solar Collector Tube under Simulated Operating Conditions
Abstract: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In this paper, heat transfer coefficient, in solar collector tube under scaling conditions has been experimentally determined using a specifically fabricated test apparatus. The effect of various variables such as scale thickness, flow conditions and tube wall temperatures on heat transfer coefficients have been investigated. The experimental results reveals that the scale thickens has a dominating effect on heat transfer coefficient.Keywords: …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 4, Issue 1, 2013 · pp. 7–12 Read article
-
Experimental Investigation of Overall Heat Transfer Coefficientin Drop wise Condensation
Abstract: The experiments are performed to study the heat transfer characteristics over a drop wise condensation. The phenomenon of drop wise condensation is in which the condensate forms into drops rather than covering the entire cooling surface with a continuous film. In drop wise condensation, heat transfer coefficient produced is 2 to 10 times greater than those produced by film wise condensation. Hence drop wise condensation is desirable as it is …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 17–21 Read article
-
Experimental Analysis on Longitudinal Finned Tube Heat Exchanger and Numerical Investigation on Parameters that Accrue the Overall Heat Transfer Coefficient
Abstract: The presence of nanofluids ascertained great augmentation in heat transfer. Several works have been done so far to parameterize the properties of nanofluid in relation to augmentation of heat transfer. In conjunction to this, the present work focuses on heat transfer within a longitudinal finned tube heat exchanger with simulated employment of nanofluids. Experimentation is done on longitudinal finned tube heat exchanger and the results were compared with numerical simulations …
Published in Journal of Thermal Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 29–41 Read article
-
Heat Transfer in Pool Boiling of H2O/LiBr Mixture
Abstract: This paper presents the results of an experimental investigation carried out to study the heat transfer in saturated nucleate pool boiling of the H2O/LiBr bromide mixture on a heated vertical copper cylindrical rod at atmospheric pressure. The mass fraction of lithium bromide was varied from 0 to 0.5. It was observed that the heat transfer coefficient increased for the mixture with an increase in heat flux and lithium bromide concentration. …
Published in Journal of Thermal Engineering and Applications · Vol. 1, Issue 1, 2014 · pp. 7–12 Read article
-
Experimental Study on Heat Transfer Enhancement in a Mini Channel Heat Sink Using Al2O3/Water Nanofluid
Abstract: In this present work, experimental investigation of heat transfer enhancement using Al2O3/water nano fluid in a mini channel heat sink is carried out. Efforts have been undertaken to explore the forced convective heat transfer performance of Al2O3/water nanofluid having 0.1% volume fraction of Al2O3 as the coolant in a copper mini channel heat sink. The mini channel heat sink fabricated consists of 15 parallel rectangular mini-channels of length 50mm with …
Published in Journal of Thermal Engineering and Applications · Vol. 1, Issue 2, 2014 · pp. 29–38 Read article
-
Passive Augmentation Studies in a Double Pipe Heat Exchanger with Ellipsoidal Dimples
Abstract: In this work, the numerical studies of heat transfer augmentation of a counter-current double pipe heat exchanger with ellipsoidal dimples (inward-facing, raised dimples) on the inner tube was performed using SOLIDWORKS software. The effect of dimple depth, dimple pitch and number of dimples/angles between two dimples on heat transfer was investigated at a constant volumetric flow rate of 4 LPM for hot (water) and cold (water) fluids. The effect of …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 2, 2026 Read article
-
Thermal Performance Analysis and Optimization of Pin-Fin Heat Sink Using CFD, Taguchi Method, and Machine Learning
Abstract: Efficient thermal management is essential for improving the performance and reliability of modern engineering systems and electronic devices. This study presents the design, simulation, and optimization of a pin-fin heat sink using SolidWorks for three-dimensional modeling and ANSYS for thermal and computational fluid dynamics (CFD) analysis. Four different pin-fin geometries, namely square, pentagon, octagon, and circular fins, are considered to evaluate their thermal performance under varying operating conditions. Aluminum is …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 8–20 Read article
-
A Review on Roughened Solar Air Heater for Heat Transfer and Thermal Efficiency
Abstract: The use of artificial roughness on the absorber plate is the most effective technique to enhance the thermal performance of solar air heaters. Experimental investigation of distinct roughness geometries shows that the enhancement in the rate of heat transfer is accompanied by considerable rise in temperature. In this paper some distinguished roughness geometries have been compared on the basis of heat transfer rate and thermal performance. The objective of this …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 1, 2015 · pp. 49–56 Read article
-
CFD Analysis of Effect of Forced Vibration on Heat Transfer in Laminar Flow
Abstract: Vibration of pipes conveying fluid is an important problem present in installations which are normally used in petroleum industries, hydropower systems, food processing industries, chemical plants and hydraulic power systems. Research is needed to further understand and be able to predict the flow behavior and investigate ways of improving their processing. The current work involves the numerical simulation of flow and heat transfer under an externally imposed mechanical vibration. CFD …
Published in Journal of Thermal Engineering and Applications · Vol. 2, Issue 1, 2015 · pp. 1–9 Read article
-
Thermal Analysis of Casting using ANSYS: A Review
Abstract: The major requirement of any foundry is to provide the high quality casting products. Since the quality is depended upon thermal stress and solidification of the casting, a thermal analysis is a key area to work on. Heat transfer coefficient is the vital element of any thermal analysis. Mould and the casting interface is the most critical area that gets affected during the solidification. Heat transfer ratio at the inter …
Published in Journal of Production Research & Management · Vol. 6, Issue 1, 2016 · pp. 19–27 Read article
-
Effect MFD Viscosity on Bénard–Marangoni Ferroconvection in a Rotating Ferrofluid Layer with Convective Surface Boundary Condition
Abstract: AbstractThe combined effect of Coriolis force due to rotation and magnetic field dependent (MFD) viscosity on the onset of Bénard–Marangoni convection in a horizontal layer of ferrofluid is investigated theoretically. The lower boundary is taken to be rigid–isothermal, while the upper free boundary open to the atmosphere is flat and subject to a convective surface boundary condition. The Galerkin technique is employed to extract the critical stability parameters numerically. It …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 2, 2020 · pp. 12–32 Read article
-
Experimental investigation of solar sill by incorporating sensible and latent heat storage materials
Abstract: The main obstacle to human life in the modern age was the lack of access to and improper distribution of potable water on earth. Despite the fact that demand for potable water is skyrocketing due to population growth and industrial exploitation, supply levels are essentially steady. Due to its simplicity in construction, ease of maintenance, techno-economic advantages, and eco-friendliness, solar is still regarded as one of the best possible options …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 10, Issue 1, 2023 · pp. 7–21 Read article
-
Numerical Study of Heat Transfer in Six Channeled Dimpled Plate Heat Exchanger
Abstract: Heat transfer augmentation is the most important criteria in many chemical, pharmaceutical and mechanical industry sectors. Considering this factor into account, heat transfer surface modification is being done for heat transfer augmentation purpose. Making dimples on heat transfer surface is one such augmentation technique. This study presents numerical analysis of six channeled counter current dimpled plate heat exchanger, in which the relative depth (dimple depth to diameter ratio (δ/D)) is …
Published in Journal of Thermal Engineering and Applications · Vol. 2, Issue 1, 2015 · pp. 15–25 Read article
-
Experimental Investigation on Heat Transfer Enhancement in Shell and Tube Heat Exchanger Using Graphene Nanofluids
Abstract: The paper focuses on the dispersion of Graphene nanoparticles in a water–ethylene glycol based fluid to investigate their impact on the convective heat transfer performance of the resulting nanofluid. Various concentrations of graphene nanoparticles were prepared, and the nanofluids were subjected to different ultrasonication durations to ensure proper dispersion and stability of the nanoparticles within the base fluid. The study involved extensive experimental evaluation to systematically analyze how the nanoparticle …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 32–38 Read article
-
Heat Transfer by Arc Welding for A Similar Material Joint
Abstract: Electric arc welding (EAW) is a traditional fabrication process used in wider domestic, commercial and industrial application. Welding is a joining of two materials with the application of heat at the molecular level with the application of heat and pressure. Many materials used for welding application for different joining process. Maraging steel is special steel used for production of different air-craft components. Maraging material is used for heavy tools, producing …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 1–13 Read article
-
Performance Evaluation of an Arbitrary Profiled Vertical Fin in Non-Newtonian Medium
Abstract: Abstract In this article, the problem of a parabolic profiled fin dissipating heat by natural convection to quiescent non-Newtonian fluid has been solved theoretically. The generalized equations of temperature distribution and heat transfer rates have been generated using the appropriate boundary conditions with different flow behavior index (n). The results obtained from the graphs indicated that there is a significant influence of flow behavior index (n) and fin parameter (M) …
Published in Journal of Thermal Engineering and Applications · Vol. 3, Issue 3, 2016 · pp. 20–26 Read article
-
Thermal Modeling of Open Sun Drying System: An Experimental Validation
Abstract: In the work being presented, the expressions for crop and moist air temperatures of open sun drying system in quasi - static state conditions have been derived. The analysis was carried out by writing energy balance equations for crop surface and moist air above the crop surface. A computer model was developed to predict the crop temperature and moisture evaporation rate of potato slices of approximately 2.5 mm thickness exposed …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 5, Issue 2, 2015 Read article
-
Optimization of Procedure and Variables of a Double Pipe Composite Heat Exchanger with Protruding Surfaces
Abstract: Under low heat duty conditions, double pipe heat exchangers are employed. When utilized for heavy-duty tasks, they show limitations. To use double pipe heat exchangers for heavy-duty applications, heat transmission needs to be increased. In this project, we are investigating the optimization process parameters of a twin pipe heat exchanger with and without protruding surfaces. In both cases, the inner and outer tubes are composed of steel, and the working …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 472–485 Read article