Search
41 articles for “HFSS simulator”
-
Gain Enhanced 2.4 GHz Slotted Rectangular Microstrip Patch Antenna with FR-4 Epoxy Substrate
Abstract: Applications that use the Internet of Things (IoT) must be combined with wireless networking technologies. This makes it easy to get to the application data. The wireless communication system is a key part of the infrastructure for the Internet of Things. It acts as a bridge for two-way connections to gather data and send control messages. In this work, HFSS software is used to create a rectangular microstrip patch antenna …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 1, 2023 · pp. 20–26 Read article
-
A Review On A Compact Dual Polarized Antenna Array
Abstract: A compact dual-polarized antenna array for low-cost millimeter-wave (mm Wave) applications is proposed in this article. Utilizing a patch antenna with two orthogonal feeds positioned horizontally and vertically, a dual linear polarization antenna can be created. Two ports—a vertical port and a horizontal port—make up the suggested design. The antenna produces horizontal polarization by stimulating the horizontal port. The antenna produces vertical polarization by stimulating vertical port. With the higher …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 2, 2022 · pp. 46–50 Read article
-
HFSS-Based Helix Antenna Design Optimization and Simulation
Abstract: This project uses HFSS (High-Frequency Structure Simulator) to simulate, develop, and analyze the performance of a helix antenna for (a particular purpose, such as broadband wireless or satellite communication). Because of their distinctive structural characteristics, helix antennas are well-suited for a variety of high-frequency applications by balancing compactness, high gain, and wide bandwidth. In this work, we parametrically analyze important design parameters including pitch, radius, number of turns, and wire …
Published in Recent Trends in Sensor Research & Technology · Vol. 12, Issue 1, 2025 · pp. 29–35 Read article
-
A Novel Approach for Design and Optimization of Slot Antenna for WLAN Applications
Abstract: The simulation, and analysis of a micro-strip fed slot antenna array intended for operation in the 2.4 GHz ISM (Industrial, Scientific, and Medical) band, which is widely used for wireless technologies such as Wi-Fi and Bluetooth. A slot antenna is a type of antenna where a slot (cut or gap) is made on a metal surface, and it radiates electromagnetic waves. Utilizing ANSOFT HFSS software, the antenna's performance is optimized, …
Published in Journal of Microwave Engineering and Technologies · Vol. 12, Issue 1, 2025 · pp. 1–12 Read article
-
Review Paper of Designing of CPW Fed Micro-strip Patch Antenna for UWB and Bluetooth Application
Abstract: A compact size coplanar waveguide (CPW)-fed micro strip antenna is proposed for radiation of the frequency spectrums 2.36 to 2.49 GHz (Bluetooth) and 3.1 to 10.6 GHz (UWB-Ultra wideband) covers. Both are unlicensed bands but in UWB band there are two licensed bands i.e. WLAN and Wi-MAX present in the frequency range of 5.12 to 5.825 GHz and 3.4 to 3.7 GHz respectively. In this design we have single CPW-fed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 35–40 Read article
-
A Comparative Study on Effect of Dielectric Covers on Microstrip Patch Antenna
Abstract: In this paper, the square patch microstrip antenna covered with different dielectric covers affects are studied at different heights above the patch and also compared their performance parameters with theoretical and experimental. The square patch antenna has been designed at 2.4GHz on airlon diclad substrate, whose dielectric constant is 2.2 and thickness is 1.6mm and simulated using HFSS simulation software. The affect of dielectric cover above the patch at height …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 1, 2022 · pp. 16–20 Read article
-
Exploring Polymer Substrates for CBSIW Antennas: Paper and Denim for Enhanced Gain and Bandwidth
Abstract: This paper presents a novel approach to antenna design by leveraging the unique properties of paper and Denim materials, both of which are polymers. This research underscores the potential of unconventional polymer materials like paper and jeans in antenna design, offering new avenues for the development of lightweight, flexible, and cost-effective communication devices for diverse wireless applications. The study focuses on the design and analysis of non-conventional substrate-based Circular Backed …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 64–80 Read article
-
A Compact Umbrella Shaped Patch Antenna using DGS for Dual/Triple/Quad Band Applications
Abstract: In this paper, a compact Umbrella shaped microstrip patch antenna for Quad band applications specially for X band, Ku band and K band applications is presented. The antenna is simulated using the Ansys soft HFSS simulator. The size of the antenna is 25 mm×25 mm ×1 mm and printed on an FR4 substrate. Defected ground structure in the form of concentric circular rings is used to increase the bandwidth of …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 36–44 Read article
-
Design of Passive Phase Shifter for Beam Steering Applications
Abstract: The role of phase shifters in the field of beam steerable antennas is vital. The paper presents a navel technique in designing of phase shifters. This technique is facilitating many advantages along with phase shifting, such as reducing mutual coupling between array antenna elements results reduction in overall antenna size and miniaturize the radiating antenna aperture. This structure also shields the components behind the antenna. This method helps in eliminating …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 26–32 Read article
-
A Novel Antenna Design based on a Single UC-PBG Layer of High Gain for Wireless Power Transfer
Abstract: In this study, a brand-new, highly effective antenna design is put forth to provide a directional radiation pattern with a small beam width for wireless power transfer. The proposed antenna is constructed from a cross-shaped patch of square holes. A favorable eclipse is paired with the antenna patch to provide circular polarization-symmetrical radiation. A symmetrical quadrature stare-shaped unit cell has a uniform compact photonic bandgap layer (UC-PBG) on top of …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 3, 2022 · pp. 8–19 Read article
-
Frozen Waves: Double T-Shape Patch Antenna Sensor for Precise Ice and Snow Measurement
Abstract: To design a Micro strip patch antenna with double T shaped slots at operating frequency 2.4GHz was developed for ice detection and measurement application. Detection was performed by monitoring the resonance frequency and amplitude of the transmission coefficient between the antenna sensor and a broadband receiver. The patch antenna sensor is also capable of distinguishing between ice and water, respectively when compared to the bare sensor. The antenna was also …
Published in Journal of Control & Instrumentation · Vol. 14, Issue 3, 2023 · pp. 15–20 Read article
-
Design of Dielectric Resonator Antenna (DRA) for 4G LTE Applications
Abstract: AbstractIn this paper, a rectangular Dielectric resonator antenna (RDRA) is presented for 4G long-term evolution (LTE) applications. A metallic stripline feed is used to excite the antenna. A metallic strip line is used to increase the electric length of the port. Rectangular DRA is designed using FR4 substrate material having dielectric constant 4.4 and design is simulated with the help of high-frequency structure simulator (HFSS). Design antenna structure covered the …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 22–27 Read article
-
Study of Bandwidth Enhancement of an S-band Microstrip Slot Antenna
Abstract: AbstractRelative study of rectangular patch, U-slot patch and E-slot patch antenna is conferred in this paper. The operating frequency is selected from S-band (2 GHz–4 GHz) which is relevant for Industrial science and medical (ISM) band, Bluetooth communication as well as wireless land area network (WLAN). High-frequency structure simulator (HFSS) software is used to investigate the results of the antennas. Microstrip patch antenna (MSPA) experience low Gain and narrow bandwidth. …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 3, 2019 · pp. 23–30 Read article
-
Design of Ultra-Wide Band Slotted PIFA for Wireless Devices
Abstract: The design of an ultra-wideband planar inverted-F antenna (PIFA) is proposed for mobile phone applications in this paper. The different slots are introduced on radiating patch and ground plane. The volume of the radiating antenna is 40x40x3.5 mm3 which is small as compared to reported work. The ultra-wide bandwidth with acceptable return loss –6 dB is obtained from 4.6 to 30 GHz with good matching and radiation characteristics. Different performance …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 2, 2016 · pp. 1–6 Read article
-
A CPW Fed Inverted E-Shape Microstrip Patch Antenna for Multi Band Applications
Abstract: In this paper a CPW fed multi band monopole antenna with inverted E-shape micro strip patch is presented for radar/satellite applications. Ansys soft HFSS simulator is used to simulate the antenna in this paper. The proposed antenna consists of inverted E shape patch including finite ground CPW feeding. The antenna is fabricated on 1.5 mm FR4 substrate which has dielectric constant of 4.4 and loss tangent of 0.02. The operating …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 26–35 Read article
-
Experimental Analysis of Rectangular and Circular Microstrip Patch Antenna with Superstrates
Abstract: This paper focusing on the experimental analysis of rectangular and circular microstrip patchantennas with and without radome (superstrate). The proposed antennas were designed at2.4GHz, using HFSS simulation software and fabricated on Arlon DiClad 880 substratewhose dielectric constant is 2.2, loss tangent is 0.0009 and thickness of the substrate is1.6mm. Placing different dielectric constant of the superstrates above the patch antennasperformance characteristics have been studied of both antennas on the basis …
Published in Recent Trends in Electronics Communication Systems · Vol. 7, Issue 3, 2020 · pp. 34–45 Read article
-
Ultra-Wideband Monopole Microstrip Filtenna with Hairpin Structure for Wireless Application
Abstract: Microstrip filtenna for WiMax/LTE and WLAN band has been proposed and presented. This paper presents design of bandpass filter having hairpin structure which is incorporated into the feedline. The FR4 substrate is used for the proposed antenna. The proposed filtenna has been designed and investigated using HFSS simulator. The proposed filtenna operates at 3.2 GHz. From the simulation results, it is extracted that passband of hairpin filter structure is from …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 7, Issue 1, 2019 · pp. 25–29 Read article
-
Optimized Rectangular Microstrip Patch Antenna for Wireless Communications
Abstract: The design is for a microstrip patch antenna that is rectangular. The wireless local area network [WLAN] resonance frequency of the suggested antenna is 2.4GHz. The antenna's frequency selection has made it ideal for use in wireless local area networks, or WLANs. The antenna design is optimised using the optometric feature of the High Frequency Structure Simulator software (HFSS) to increase the accuracy and efficiency of the suggested antenna. HFSS …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 12, Issue 1, 2025 · pp. 37–47 Read article
-
Performance Analysis of Rectangular Patch Antenna with EBG using Quarter Wave Feed Line and Coaxial Feed Line Methods for C-Band Radar Based Applications
Abstract: Microstrip antenna has various attractive features like light weight, low cost, easy fabrication, etc. Microstrip antenna can be fed in a variety of ways. This paper is focused on the enhancement of gain of the rectangular patch antenna with electromagnetic band gap structures at 7.5 GHZ for two different feeds and compares their results. The two types of feeds are coaxial line feed and quarter wave feed. Antenna design has …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 19–25 Read article
-
Millimeter Wave Slotted Microstrip Patch Antenna for Next Generation 5G Communication
Abstract: Abstract: In this paper, a printed microstrip patch antenna is analyzed for lower band 5G technology. The proposed printed Microstrip patch antenna has a compressed structure having dimension 20 × 20 × 1.6 mm3 with the conducting ground plane and this antenna is well suited for the use in handheld next generation 5G devices. Modified antenna resonated at lower band of 5G communication technology. In this research work geometry of …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 25–30 Read article