Search
28 articles for “Geotechnical parameters”
-
Probable Causes of Cracks on selected Buildings at Akrowa in Afigya Kwabre District, Ghana
Abstract: This work evaluated the nature of the foundation soils and cracks on twelve representative buildings at Akrowa, in the Afigya Kwabre District near Kumasi in Ghana. Age, material used whether clay/concrete, dimensions of cracks on the buildings and tests for geotechnical parameters of foundation soils such as moisture content, bulk density, specific gravity, particle size distribution, Atterberg limit and direct shear were carried out on soils from four pits dug …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 3, 2023 · pp. 29–39 Read article
-
EFFECT OF ENGINE OIL CONTAMINATION ON THE GEOTECHNICAL PROPERTIES OF SOIL AND STABILIZATION TECHNIQUES: A REVIEW.
Abstract: Soil contamination by engine oil basically occurs due to spills and leaks. It is common near highways, petrol pumps, workshops, off shore petroleum productions etc. The change in geotechnical properties of soil due to engine oil contamination may cause serious problems like cracking and settlement of structures. The paper aims at reviewing the works of researchers on the effect of engine oil contamination on the various geotechnical properties of soil. …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 3, 2020 · pp. 9–12 Read article
-
Reliability-Based Prediction of Bearing Capacity of Shallow Foundation Along Ajaokuta-Kaduna-Kano Pipeline Track
Abstract: This paper investigates the geotechnical properties and reliability-based bearing capacity predictions for shallow foundations along the proposed Ajaokuta-Kaduna-Kano (A-K-K) pipeline track in Nigeria. The variability of subsoil properties along this route poses significant challenges to ensuring foundation stability and safety, necessitating an in-depth study. A total of twenty boreholes were strategically drilled at key locations to a maximum depth of 30 meters, providing comprehensive subsurface profiles. Soil samples collected from …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 1, 2025 · pp. 9–17 Read article
-
Shallow Seismic Refraction Investigation for Site Classification and Geotechnical Engineering Applications
Abstract: The survey was carried to determine the Site Class of the study area and also estimate some geotechnical parameters of potential construction sites within the study area. The survey was conducted on the University of Mines and Technology (UMaT) campus, using Geometrics ES 3000, A 12-Channel seismograph developed by Geometric Inc. The results from the study show that the subsurface of the study area is made up of four layers. …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 2, 2020 · pp. 18–28 Read article
-
Characteristics of Geology in Khulna City Corporation (KCC) Area, Bangladesh
Abstract: This study represents the general characteristics of foundation soil in Khulna City Corporation (KCC) area. The KCC is situated in southwestern part in Bangladesh. Lithologically the area is composed of coarse to very fine silty sand, silt, silty clay, clayey silt and clay in various proportion. The SPT (Standard Penetration Test) value of the investigated area range between 0 and 7 from surface to 8 m deep. Here, the liquid …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 1, 2014 · pp. 39–45 Read article
-
Expansive Soils and Identification Methods
Abstract: Expansive soil is a well-known type of difficult soil. It can cause critical damage to civil engineering facilities. The unfavorited physical, mineralogical, and engineering characteristics are the main reasons for the difficult nature of expansive soil. Understanding specific parameters and properties of expansive soil are important to categorize and identify swell potential. Furthermore, reviewing the most useful methods for identifying and measuring the expansive soil characteristics may help the engineer …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 2, 2022 · pp. 39–37 Read article
-
A Study on Stabilization of Black Cotton Soil Using Fly Ash and Plastic Fibres
Abstract: AbstractSoil stabilization is most important for the construction which is widely used in connection with road pavement and foundation construction because it improves the engineering properties of soil such as strength. Utilization of industrial waste materials in the improvement of soils is a cost efficient and environment friendly method. Stabilization of the expansive soil is studied by using fly ash and plastic fibres. The present investigation is to evaluate the …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 3, 2017 · pp. 11–18 Read article
-
Integrating Sensor Technologies and Machine Learning for Detection and Mitigation of Structural Deformity and Slope Failure in Opencast Mines
Abstract: With furtherance in the mining industry, accidents due to slope failure are frequent in mining sites. Slope instability, a complex process, seriously threatens the miner’s life and properties. The damage inflicted by slope failures in the recent past has pulled the attention of authorities toward implementing disaster risk reduction measures. This research aims to develop an innovative approach that combines sensor technologies and machine learning techniques to detect and mitigate …
Published in Journal of Communication Engineering & Systems · Vol. 13, Issue 3, 2023 · pp. 38–45 Read article
-
Evaluation of Building Foundations: A Structural Engineering Perspective
Abstract: This study focuses on the comprehensive assessment and design of building foundations, emphasizing the critical relationship between structural loads and soil properties. The depth of the foundation is determined by analyzing the load exerted on the column and the soil's bearing capacity, both of which play a pivotal role in ensuring stability. Similarly, the foundation base size is calculated based on these parameters to ensure it effectively transfers the load …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 6–18 Read article
-
Near-Surface Seismic Refraction Tomography; a case study for geotechnical application
Abstract: Usually, among geophysical techniques, seismic refraction methods are used to investigate near surface geology for engineering purposes. In these study physical parameters, longitudinal seismic wave velocities were used to characterize the shallow subsurface layers for geotechnical application. The physical response of subsurface materials varies as the structure, porosity, fluid saturation, composition and tie-up vary. These variations primarily viewed in the first arrival time of seismic waves. With the necessary steps, …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 2, 2019 · pp. 18–26 Read article
-
A study to investigate the shear strength resistance of Ennore sand from conventional direct shear test.
Abstract: In this article analysis of shear strength parameters of Ennore Sand is given using the direct shear test. The shear strength parameters of cohesion and angle of shearing resistance are employed in the construction of geotechnical constructions to describe the soil's ability to sustain shear stress when subjected to a certain load. These might be measured using laboratory or field testing. When shearing a sample in a direct shear apparatus, …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 3, 2022 · pp. 19–26 Read article
-
Geotechnical Influence Factors in Empirical Design of Highway Pavement: The A123 Ilorin – Lokoja Highway, Nigeria Case Studies
Abstract: Site investigation and application of geological and geotechnical influence factors on the highway were investigated. Method involved field sampling, geotechnical laboratory and x-ray diffraction analysis and use of SRTM extracted slope and drainage parameters; and their integration in a GIS based multi-criteria decision analysis to derive a subgrade suitability map as a design tool. The suitability criteria classified the highway into four (4) design sections. Section one for very low …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 53–70 Read article
-
Modeling Deformation Mechanisms of Horseshoe Tunnel Excavation In Layered Ground Using Flac 3D
Abstract: In the modern era of civilization, the transportation sector plays a pivotal role in a nation's development. Efficient transportation networks are essential for economic progress, and tunnels are particularly valuable in this regard, as they help reduce travel time and fuel consumption. With growing interest in underground infrastructure, researchers are increasingly focusing on tunnel-related studies. This paper examines the deformational behavior of a horseshoe-shaped tunnel constructed in layered soil, subjected …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 3, 2025 · pp. 46–61 Read article
-
Computational Modeling on Behavior of Annular Stone Column with Variation of Parameters in Stratified Soils
Abstract: Many studies made reports on the soft soil improvement by the application of stone columns.Ordinary stone columns are installed by vibro-replacement method in the field to be get compacted. The material requirement will be based on diameter of column and encasement around the column can be provided to get more loading ability. In this study, the modification of stone column by changing its structure from solid stone column to hollow …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 9–17 Read article
-
Assessment of Clayey Soils and Bentonite to Use as Compacted Clay Liner for the Disposal of Municipal Solid Wastes at Lucknow City, India
Abstract: Dumping of municipal solid wastes in a pit without liner causes groundwater contamination. Use of locally available clayey soils will be a cost-effective landfill technique. Mixing of locally available soils with bentonite reduces the permeability. To develop the liner for the disposal of municipal solid wastes generated from Lucknow city, India, the soil samples were collected from three different locations as nearby the Sagar Institute, Barabanki district; near railway crossing, …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 3, 2025 · pp. 62–71 Read article
-
Geotechnical Analysis and Performance Evaluation of Subgrade Materials in Road Construction
Abstract: Geotechnical engineering plays a pivotal role in the design, construction, and long-term maintenance of infrastructure, particularly in road construction, where subgrade conditions are directly linked to pavement performance, durability, and overall structural integrity. The performance of a road is heavily influenced by the geotechnical properties of the subgrade, making it essential to thoroughly assess these properties in the planning and construction phases. This study comprehensively investigates the geotechnical characteristics and …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 24–29 Read article
-
Laboratory permeability and single ring infiltration tests for the testing of waterproofing barriers of landfill tanks.
Abstract: Hydraulic conductivity is a fundamental hydrogeological parameter for the testing of waterproofing barriers of landfill tanks. These barriers are aimed at guaranteeing the isolation of the waste and preventing the infiltration of the percolate in the subsoil.Geotechnical features of mineral barriers must be preliminarily established through geotechnical laboratory tests in order to verify their suitability for their application.The main mineral barriers correspond to the bottom waterproofing of the landfill tanks …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 2, 2020 · pp. 29–37 Read article
-
Red Earth Development of a Soil-Based Composite Using Bagasse Ash and Lime: Effects on Plasticity and Compaction Characteristics of Red Earth
Abstract: The concept of sustainable soil composites (SSC) emerges through blending red earth with bagasse ash (BA) and hydrated lime to enhance geotechnical properties and enable productive reuse of agro-industrial waste. Red earth functions as the matrix, BA acts as a fine pozzolanic microfiller, and lime serves as the chemical binder. BA content ranges from 0% to 60%, with 10% identified as optimal; subsequent lime additions from 1% to 5% evaluate …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1147–1158 Read article
-
Effect of Reinforcement on Bearing Capacity of Sand
Abstract: The reinforced earth concept, which is now being evaluated with increased significant encompasses formation of a composite of a soil with tension resistance reinforcing elements such as metallic and nonmetallic strips, bars, rods fibers or nets in the soil. The objective of using the reinforcement is to supress the normal tensile strains in the soil mass through frictional interaction. Flexible nature of reinforced earth mass enables it to withstand large …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 3, 2014 · pp. 8–12 Read article
-
An Innovative Technique for Soil Improvement by Polythene Waste
Abstract: This study investigated the possibility of making use of polyethylene buying baggage waste to boost soils to pave way for its use in civil engineering projects together with in street bases, embankments and slope stabilisation. A chain of direct shear tests become undertaken on soil-plastic composites of decided on sandy soils: Klipheuwel and Cape residences sands. Strips of shredded plastic cloth had been used as reinforcement inclusions at concentrations of …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 2, 2016 · pp. 7–11 Read article