Search
52 articles for “Functional fillers”
-
Development and Characterization of Rubber Composites using E-Waste Residue as Functional Filler
Abstract: In the present study, residue generated during the recycling of end-of-life printed circuit boards (PCBs) was utilized as a functional filler in natural rubber to fabricate eco-friendly composites using mixing and molding techniques. Chemical analysis of the residue revealed the presence of several metals, including copper, iron, lead, tin, and zinc. The presence of these metals highlights the need for proper recycling and safe management of PCB residues, as their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 512–523 Read article
-
A Comprehensive Review of Green Hybrid Polymer–Inorganic Composite Systems Incorporating Palm Tree Ash and Titanium Dioxide
Abstract: The increasing requests on sustainable and high performance systems have motivated extensive investigations on polymer-based hybrid systems with bio-derived and/or functional inorganic fillers. In this review, the importance of palm tree ash (PTA) and titanium dioxide (TiO₂) as synergistic fillers for polymer–inorganic hybrid composites, particularly about structure–property relations, interfacial adhesion and durability performance, is discussed. Agricultural waste-derived palm tree ash (PTA) plays as a silica-rich filler which not only aids …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1811–1820 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Molecular Transport Kinetics of Non-Polar Solvents Through AGNP Filled EPDM Elastomeric Composites
Abstract: EPDM Based rubber composites can be used in tank and pipe lining works. In these applications one of the major requirements is that the composite must have good fluid permeability and chemical degradation resistances in their working environment. In order to enhance the performance of EPDM rubber to suit these applications, scientists and engineers are trying to develop novel nanocomposites by incorporating nano fillers. In the present work, to ensure …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 993–1006 Read article
-
Review And Analysis of Application of Conductive Polymer Composites in Power-Efficient RF Circuits For 5G PAPR Reduction
Abstract: The need for low power RF circuits has gained more importance in the background of fifth-generation (5G) wireless communication systems, since the inherent PAPR characteristic of 5G signals—especially when using orthogonal frequency division multiplexing (OFDM) based techniques—becomes high. This high PAPR limits the efficiency of RF power amplifiers, increases power consumption, and induces thermal management challenges. In this context, conductive polymer composites (CPCs), based on advanced polymer matrices integrated with …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 111–125 Read article
-
Role of Polymeric Composites in Controlled Drug Release Systems
Abstract: In the realm of controlled drug release systems, polymeric composites have attracted a lot of interest as they possess several diverse characteristics that enable exact control of the drug delivery rate. This lowers adverse effects and increases the efficacy of treatment. Usually composed of biocompatible polymers combined with functional fillers like nanoparticles, ceramics, or hydrogels, these composites help to get the desired drug release patterns. Stable, biodegradable, and bioactive materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 453–465 Read article
-
Facile Synthesis and Characterization of Cd²⁺ Doped NiAl₂O₄ Nanoparticles for Advanced Polymer Composite Integration
Abstract: Ni1-xCdxAl2O4, where 0 ≤ x ≤ 0.5, was successfully synthesized using the chemical co-precipitation technique, a scalable and cost-effective route suitable for composite material applications. X-ray diffraction (XRD) analysis revealed a crystalline cubic spinel structure for the resulting nanoparticles, with determined crystallite sizes ranging from 36 to 12 nm for NiAl2O4 and Cd-doped NiAl2O4. The respective band gaps for the materials were found to be 3.51 and 4.18 eV. Infrared …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 59–72 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
Sustainable High-Strength Geopolymer Composite Reinforced with Nano-Silica and Basalt Fibers: Mechanical and Microstructural Evaluation
Abstract: Sustainable soil composites (SSC) were formulated by incorporating red earth with varying proportions of bagasse ash (BA) and hydrated lime to enhance geotechnical performance and promote the reuse of agro-industrial waste. Red earth served as the primary structural matrix, BA functioned as a pozzolanic filler, and lime acted as a chemical stabilizer. BA content ranged from 0% to 60%, identifying 10% as the optimum level for significant improvement, and lime …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1113–1122 Read article
-
Structure–Optical Property Correlation of Co-Doped TiO₂ and ZnO Nanofillers for Advanced Functional Composite Applications
Abstract: This study investigates the enhancement of the structural and optical properties of titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles through cobalt (Co) doping. Pristine TiO₂ and ZnO are widely studied metal oxides; however, their large band gaps and limited visible-light absorption restrict their performance in optoelectronic, photocatalytic, and environmental applications. Co doping is employed as an effective strategy to overcome these limitations by inducing band-gap narrowing, creating defect-related electronic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1374–1394 Read article
-
Development of Self-Healing Circuit Boards Using Shape Memory Polymer Composites
Abstract: This study investigates the influence of temperature, humidity, and nanofiller type on the electrical and structural performance of advanced polymer nanocomposites for self-healing circuit applications. Particular attention was given to conductivity retention and the morphological behavior of carbon nanotubes (CNTs), graphene, and silver nanoparticles (AgNPs). Results show that conductivity decreased under elevated thermal–humidity conditions, reflecting the role of environmental stress in material degradation. Among the tested systems, AgNP-based composites achieved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 746–770 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Graphene-Derived Reinforced Polymer Composites for Self-Healing and Durability Enhancement in Concrete Structures
Abstract: This study presents a matrix-centric polymer-composite repair binder: an epoxy–polyamide network reinforced with graphene derivatives (GO/rGO, 0.1–1.0 wt%). The polymer drives function via segmental mobility that closes microcracks, while 2D-filler topology densifies the interphase, improves load transfer, and enforces tortuous moisture pathways. Adhesion was high: pull-off (ASTM D4541) reached 13.5 MPa at 2.0 mm displacement; slant-shear (ASTM C882) reached 12.1 MPa at 2.8 mm, with greater deformation capacity (zero stress …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 77–91 Read article
-
Electroactive Graphene–Polymer Nanocomposites for Self-Sustaining and Multifunctional Flexible Devices
Abstract: Graphene–reinforced polymer–composites were developed and systematically investigated to explore their multifunctionality in flexible electronic applications. The study specifically aims to correlate graphene-induced structure–property–function relationships with electroactive performance and self-sustaining behaviour in flexible devices. The hybridization of electroactive polymers—polyaniline (PANI), poly(3,4-ethylenedioxythiophene): polystyrene sulphonate (PEDOT:PSS), and polyvinylidene fluoride (PVDF)—with graphene nanoplatelets enabled simultaneous enhancement of electroactivity, energy-harvesting, and sensing functionalities. Morphological studies confirmed uniform graphene dispersion at 5 wt.% loading, forming continuous …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 260–271 Read article
-
Stretchable Elastomer–PCM Composites with Bluetooth-Enabled Temperature Monitoring for Wearable Healthcare IoT Devices
Abstract: The rapid advancement of wearable healthcare technologies has created a growing demand for multifunctional polymer composites capable of simultaneously providing mechanical flexibility, thermal energy management, electrical conductivity, sensing capability, and wireless communication. In this study, a stretchable elastomer-based polymer composite integrated with a phase-change material and a Bluetooth Low Energy temperature monitoring system was developed for wearable healthcare Internet-of-Things applications. The polymer composite was fabricated using an Ecoflex silicone elastomer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 241–257 Read article
-
The Silent Mineral: Structural Complexity and Industrial Utility of Natural Kaolin
Abstract: Kaolin, a naturally occurring aluminosilicate clay predominantly comprising the mineral kaolinite (Al₂Si₂O₅(OH)₄), exhibits a 1:1 layered silicate structure that imparts distinctive physicochemical properties suitable for extensive industrial utilization. Deposits of kaolin are broadly classified into primary (residual) and secondary (sedimentary) categories, each defined by their geological origin and mineralogical features. The industrial processing of kaolin encompasses stages such as raw material extraction, beneficiation, and purification, aiming to optimize parameters including …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 1, 2025 · pp. 52–61 Read article
-
Gamma Irradiation Effects on Structural and Optical Properties of PVA/Al₂O₃/TiC Polymer Nanocomposites for Optoelectronic Applications
Abstract: PVA/TiC/Al2O3 nanocomposite (PTA) films were successfully prepared via the solution casting method. The impact of high-dose gamma (γ) irradiation (30 kGy) on the structural and optical properties of PVA/TiC/Al2O3 nanocomposites was systematically explored using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and UV–Visible spectroscopy. XRD analysis confirmed the semi-crystalline nature of the nanocomposites, which was found to decrease upon incorporation of Al₂O₃ nanoparticles and exposure to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 717–729 Read article