Search
8 articles for “Dry sliding wear”
-
Optimizing Parameters for Dry Sliding Wear Control in Stir-Cast AA7050/SiC Composites
Abstract: Using a pin-on-disc tribometer, this study examined the dry sliding wear behavior of AA7050/SiC composites. The production of this metal matrix composite was achieved through the stir-casting process, which involved an initial step of melting the AA7050 alloy, followed by the careful introduction of silicon carbide (SiC) particles, stirring to achieve uniform dispersion, and finally, casting the molten mixture. Wear rate (WR) was determined by three operational parameters: SiC reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1624–1635 Read article
-
Investigation on Dry Sliding Wear Behaviour of AlSi7Mg0.3/B4C/ZrO2 Hybrid Composites using Taguchi Method
Abstract: Hybrid Aluminium/Boron carbide/Zirconium oxide (AlSi7Mg0.3/B4C/ZrO2) composites were fabricated utilizing stir casting technique by varying boron carbide content (4wt.%, 8wt.% and 12wt.%) and utilizing a fixed amount (4wt.%) of zirconium oxide particles. Optical microscopy revealed that B4C and ZrO2 particulates were dispersed uniformly in AlSi7Mg0.3 matrix. Dry sliding wear experiments were carried out utilizing the pin-on-disc tribometer with various levels of applied loads, sliding speeds and weight percentage of boron carbide …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 166–177 Read article
-
Wear Performance of Cylindrical Shaped Alumina Nanoparticles Filled Epoxy Composite
Abstract: Low cost high specific strength epoxy LY 556 and alumina nano filler is utilized in current research for developing a epoxy composite. A liquid dispersion method was adopted for fabricating epoxy alumina composite having 0.50 wt% of alumina reinforcement. For uniform and homogenous dispersion of reinforcement, ultra-sonification of 120 W is adopted. To study the effect of particle behavior, unfilled epoxy and 0.5 wt.% cylindrical alumina oxide filled epoxy composite …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 94–100 Read article
-
Evaluation of Fly Ash/ZrO2 Reinforced AZ91E Hybrid Composites Based on Wear and Friction Characteristics
Abstract: In the current study the compo-casting Al alloy MMCs' wear resistance was examined under a variety of abrasive circumstances, including coefficient friction, wear rate and it’s sliding distance. The AZ91E matrix composite was made by the liquid metallurgy process and reinforced with aluminum plated zirconium dioxide (ZrO2) particles. Designers examined the characteristics of matrix alloys along with created composites. friction and wear from dry sliding experiments had been performed on …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 324–338 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Fabrication and Assessment of Tribological Performance of Nickel-Graphene-MXene Hybrid Nano-composites
Abstract: As industries such as aerospace, automotive, defence, and electronics demand materials with superior wear resistance, high strength, and thermal stability, traditional metals are reaching their performance limits. Hybrid nanocomposites offer a pathway to meet these stringent requirements. In this study, novel Nickel-Graphene-MXene hybrid nanocomposites were fabricated using a powder metallurgy route, incorporating varying weight percentages (up to 2 wt.%) of MXene and 1 wt.% graphene nanosheets into a nickel matrix …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 780–798 Read article
-
Red Mud Particles' Impact on the Mechanical Properties and Microstructure of AA6005 Composites for Brake Rotor Applications
Abstract: There is increasing focus on utilizing industrial waste as reinforcement in metal matrix composites, driven by the demand for eco-friendly and cost-effective materials in automotive applications. With an emphasis on their possible use in braking rotors, this study examines how red mud particles affect the microstructure and mechanical characteristics of AA6005 aluminum alloy composites. Red mud, a byproduct of the Bayer process, is a good low-cost ceramic reinforcement because it …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 573–581 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article