Search
14 articles for “Discharge coefficient”
-
Review on Main Equations for Measuring Spray Properties in Centrifugal Injectors
Abstract: The method of fuel injection has a significant effect on the stability and proper mixing of fuel and oxidizer, which is done by the injector. In other words, the injector is a device that converts fluid into droplets. The faster and better the particle crushing rate, the faster the fluid particles will evaporate, resulting in higher thermal efficiency and higher thrust force. Therefore, how to inject fuel into the combustion …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 3, 2021 · pp. 17–23 Read article
-
CFD simulation of methane flow through an orifice plate
Abstract: In this paper the effects of errors in the flow rate and discharge coefficient when Methane (CH4) flow through orifice plates with flange tapping has been investigated by the Computational Fluid Dynamics (CFD). The location of vena- contracta was also estimated from CFD simulations. Outcomes of the CFD simulations are in terms of profiles of pressure and velocity. In this study a numerical investigation of the flow characteristics behavior caused …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 1–6 Read article
-
Hydraulics of Flow Through and Over Fayoum Weir with Rectangular Bottom Openings
Abstract: Fayoum standard weirs have been modified by adding number of bottom openings to convey much water to downstream direction. This study aims to investigate the effects of using different configurations of Fayoum weirs with rectangular bottom openings on flow characteristics under different dimensions and number of openings. 46 weir configurations with height of 25 cm were used in this study, divided into four groups A, B, C and D. Each …
Published in Journal of Water Resource Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 17–25 Read article
-
Experiments to Control the Surface-Driven Microfluidic Flow of Dyed Water in Straight PMMA Microchannels Fabricated by Maskless Lithography, Hot Embossing Lithography and Direct Bonding Technique
Abstract: Total six individual straight microchannels are fabricated by maskless lithography, hot embossing lithography and direct bonding technique using author’s own hands-on completely inside the cleanroom laboratory. Polymethylmethacrylate (PMMA) is the selected polymeric material to fabricate these straight microchannels. Dyed water is prepared as working liquid to record and study the microfluidic flow characteristics inside these fabricated microchannels. Air dielectric barrier discharge (DBD) plasma processing is the surface modification technique in …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 1, 2020 · pp. 17–23 Read article
-
The climate change analysis on water resources over western Ghat by deficit calculation method
Abstract: The objective of this work is to study the extreme hydrological events and climate change impact on water resources over western Ghat. The western ghat is spread over the area 140 thousand square kilometers and 2600 meter of average elevation. The 1600 Km long western ghat is biodiversity hotspot and home of different species it also forms the catchment which drains over one-third of India. To analyze the extreme hydrological …
Published in Journal of Water Resource Engineering and Management · Vol. 7, Issue 1, 2020 · pp. 16–35 Read article
-
Energetic and Exergetic Investigation on Vapor Compression Refrigeration System Using Ag₂O-R134a Nanofluid as Refrigerant
Abstract: This paper experimentally explored energetic and exergetic performance investigation of VCR System using Ag₂O-R134a Nanofluid as Refrigerant. The integration of silver oxide (Ag₂O) nanoparticles within polymer and composite materials offers promising avenues for enhancing the thermal and physical properties of advanced systems. The energetic and exergetic performance study of VCR were investigated with test parameters including compressor power consumption, cooling capacity, coefficient of performance (COP), discharge temperature, irreversibility in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 279–287 Read article
-
Modeling Reaction Rate of Dispersion Coefficient and Oxygen Deficit on Nitrobacteria Transport in Onu-Imo River
Abstract: The migration rate of nitrobacteria in the Onu-Imo River was monitored based on some variables that determine the predictive model for such pollution transport. These parameters were factors applied in developing the derived model for the study. The variables were integrated into the system to monitor their various rates of impact on the transport process in the study environment. This was monitored by applying a one-dimensional flow transport system at …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 1, 2021 · pp. 28–41 Read article
-
Management of Lead–Acid Battery System in Electric Vehicles
Abstract: To determine the lead-acid battery's state of charge in electric vehicles, a novel coulometric method is presented in this article. There are two major problems with the main state of charge algorithms that are currently in use: one defines the state of charge incorrectly for applications involving electric vehicles, and the other uses the accumulator's static performance sub-optimally to estimate its state under dynamic stresses. To address these two shortcomings, …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 1, 2024 · pp. 18–27 Read article
-
Analysis of Machining Parameters in Wire EDM with Aluminum Alloy Using PCA and TOPSIS Approach
Abstract: Although the efficiency of traditional cutting processes is inadequate by the mechanical properties of the processed material and the intricacy of the work piece geometry, electrical discharge machining (EDM) being a thermal erosion process, is subject to no such limitations. This paper summaries the suitable use of Taguchi’s L27 orthogonal array which takes 27 experimental runs to develop a mathematical model for correlating the interactive and higher order impacts of …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 2, 2017 · pp. 1–11 Read article
-
Posterior Reversible Encephalopathy Syndrome Secondary to Management of Dimorphic Anemia by Repeated Blood Transfusions: A Case Report
Abstract: Posterior reversible encephalopathy syndrome, popularly known asPRES, is defined as a clinicoradiological syndrome which is characterized by symptoms such as headache, seizures, and altered consciousness and characterized by white matter vasogenic edema affecting the posterior occipital and parietal lobes of the brain .We report a 39-year-old woman who was treated by iron and blood transfusion for dimorphic anemia with a hemoglobin (Hb) level of 2 g/dl. Patient developed three episodes …
Published in Research and Reviews: A Journal of Medicine · Vol. 8, Issue 2, 2018 · pp. 6–8 Read article
-
Artificial Neural Network Modelling to Optimize Micro-Drilling Parameters of ECDM of Developed Novel Zn/(Ag+Fe)-MMC
Abstract: Several engineering fields have increased their use of metal matrix composites (MMCs) in the past few years. Due to the increase in composites, the demand for accurate machining has also become important. Specifically, pertaining to biomaterial applications, accuracy factor with desired surface finish is critical. While the near-net shape manufacturing process has advanced, MMCs frequently require post-mould machining to achieve surface quality, and dimensional tolerances. In the present study, a …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 01–13 Read article
-
Experimental Investigations on the Effects of Channel Aspect Ratio and Surface Wettability to Control the Surface-Driven Capillary Flow of Water in Straight PMMA Microchannels
Abstract: AbstractTotal 214 individual straight polymethylmethacrylate (PMMA) microchannels have been fabricated by the maskless lithography, hot embossing lithography, direct bonding technique, and atmospheric pressure air dielectric barrier discharge (DBD) plasma processing. The experimental investigations on the effects of structural properties (channel aspect ratios) and physical properties (surface wettability, capillary pressure and kinetic energy) on the surface-driven capillary flow of dyed water in straight PMMA microchannels is a novel approach in this …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 3, 2016 · pp. 1–12 Read article
-
Rainfall-runoff Modeling using HEC-HMS Hydrologic Model for Guder River Watershed, Blue Nile Basin, Ethiopia
Abstract: Rainfall-runoff modeling is important for a number of hydrologic applications including flood forecasting, water resource planning and management. This study presents the result of a watershed rainfall-runoff modeling for Guder river watershed having area of 6597 km 2 using Hydrologic Engineering Center-Hydrologic Modeling Systems (HEC-HMS). The watershed runoff is varying spatially and temporally due to manmade factors and natural factors on the watershed. These issue needs efficient water resource planning …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 2, 2021 · pp. 62–77 Read article
-
An Experimental Study on Multi-Criteria Parameters Optimization of Process for Al6351/SiC/Gr Metal Matrix Composites Using AHP-TOPSIS Approach
Abstract: This research focuses on optimizing the process parameters of Wire Electrical Discharge Machining (WEDM) for a hybrid Metal Matrix Composite (MMC) comprising Al6351 aluminum alloy reinforced with 4% SiC and 6% graphite (Gr), fabricated via squeeze casting. This technique enables the formation of dense, defect-free composites with uniform reinforcement distribution, enhancing both mechanical properties and structural integrity. Microstructural characterization using Scanning Electron Microscopy (SEM) confirmed the even dispersion and bonding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 303–319 Read article