Search
38 articles for “Corrosion rate”
-
Corrosion Characterisation of Low Alloy CrMoV Steel Before and After Cryogenic Heat Therapy
Abstract: Low alloy CrMoV steel is used in Turbine wheels, Distance pieces, Compressor aft shafts etc of Gas Turbines. Cryogenic heat treatment was used to examine the effects on the corrosion resistance of low alloy CrMoV steel. In order to eliminate residual stresses and boost wear resistance in steels and other metal alloys, cryogenic heat treatment (CHT) employs cryogenic temperatures (i.e., below - 190°C) to treat work parts. Cryogenic treatment is …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 63–73 Read article
-
Monitoring the Effectiveness of Water-Based Plants for the Inhibition of Metal
Abstract: The temperature performance profile of the plant extracts shows that inhibition efficiency increased with increasing temperature of the system until at about 323K at 9.00hrs immersion time where a decline in inhibition efficiency occurred implying the opposite at higher temperatures and longer immersion time. Corrosion rate parameters changed with rise in temperature and exposure – immersion time. Plots of rates of corrosion against the volume(s) of the test inhibitor(s) in …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 37–47 Read article
-
The Effects of Physiochemical Parameters and Microbial Counts on Metal Coupons Corrosions in Freshwater Environment at Different Water Depths
Abstract: The effect of water quality on metal coupon corrosion was investigated at the New Calabar River in Choba. The study examined metal corrosion rates at five different depths: 30 cm, 60 cm, 90 cm, 120 cm, and 150 cm in a freshwater environment. Water samples were collected at each depth and analyzed for physicochemical and microbial parameters to understand their impact on metal degradation. Key parameters measured included pH, Electrical …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 2, 2025 · pp. 31–51 Read article
-
Understanding the Corrosion Behaviour of Graphite in Peat Environment for Environmental and Sustainability Applications
Abstract: Graphite, which is one of the most remarkable carbon materials for industrial applications, is a heat exchanger component material in the phosphoric acid industry, bipolar layer or electrode material in vanadium redox flow batteries, electrode material for advanced oxidation processes, electrode material for lead-acid batteries, electrode material in fuel cells and microbial fuel cells, and more interesting, as moderator or core material in nuclear reactors used. Corrosion, one of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 728–737 Read article
-
Influence of Mechanical Parameters on Corrosion Behavior of Metal Coupons in Simulated Environmental Conditions
Abstract: This study investigates the influence of mechanical parameters—namely applied stress, surface roughness, and deformation history—on the corrosion behavior of metal coupons exposed to corrosive environments. Mild steel and aluminum alloy specimens were prepared with controlled variations in tensile stress, polishing grades, and cold-working levels to simulate real-world mechanical influences. These coupons were immersed in a 3.5% NaCl solution under ambient conditions, and their corrosion rates were monitored over a 30-day …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 6–12 Read article
-
Corrosion and Corrosion Protection of Cast iron due to Bio-organism
Abstract: Cast iron is a high tensile strength metal. It is generally used for making tools, pipe fitting, electrical fitting equipment and rail track. It interacts with corrosive substances to develop electrochemical cell on their interface. Corrosive substances are acids, bases, salts, bio-wastes, particulates and pollutants. These substances produce hostile medium for materials. These harmful wastes discharge by industries, households, agricultural, urbanization, development of infrastructure, construction works, thermal power stations, hydropower, …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 105–114 Read article
-
Evaluation of Metal Coupons Corrosions in Fresh Water Environment at Different Water Depths Using Finite Element Analysis
Abstract: This research addressed the effects of water depths and quality on corrosion of submerged metal structures in the water body considering environmental conditions. The depths considered were 30cm to 150cm. Four different metal coupons were selected (Mild Steel, Copper Steel, Carbon Steel and Stainless Steel] Galerkin`s finite element techniques was applied to evaluate the relationship between diffusion and weight loss, also velocity and weight loss at different water depths. The …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 27–50 Read article
-
Polymeric Coating Applied for Corrosion Protection of Mild Steel in Corrosive Medium
Abstract: Mild steel is coated with a polymer layer of polybutadiene for protection. However, this coating does not effectively safeguard the metal in environments containing moisture, sulphur dioxide, or chloride. These pollutants interact with the polybutadiene-coated surface, creating a highly corrosive atmosphere. Moisture condenses on the coated metal surface and absorbs sulphur dioxide, forming sulphuric acid. This acid initiates both chemical and electrochemical reactions with the polymer-coated metal, accelerating the corrosion …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 49–53 Read article
-
Corrosion and Corrosion Protection of Unio in Carbonic Acid Medium
Abstract: Unio is a calciferous animal, and its outer surface is made of calcium carbonate. It usually happens in sources of sweet water. They create carbonic acid by absorbing carbon dioxide. It changes the pH of sweet water sources thus water becomes acidic. It develops corrosive environment for Unio. Carbonic acid interacts with Unio to form corrosion cells on the interface of Unio. This acid oxidizes calcium carbonate into calcium ions …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 1, 2025 · pp. 22–31 Read article
-
Electrodeposition and Magnetron Sputtering of Rhenium Coatings on Carbon-Carbon Composites for Enhanced Corrosion Resistance and Structural Integrity
Abstract: It is well known that tailored materials are gaining in-roads to aviation and other manufacturing industries where stringent requirements are to be met, due to high temperature erosion, which is a problem. In order to counter these issues, materials which can resist a very high temperature are to be sought. One of the several methods to combat this high temperature issue is to provide a metallic refractory material coating on …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 35–44 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Performance Evaluation of Green Walnut Husk Waste Extract for Inhibiting Aluminium 8088 Corrosion in Acidic Solution
Abstract: The cumulative call for environmental and supportable corrosion inhibitors has obsessed curiosity in exploiting plant-based agronomic surplus resources. Presented research work discovers the corrosion inhibition probable of green walnut husk extract(GWH)—a normal and plentiful agro-waste—on Aluminium 8088 alloy in an acidic medium. Aluminium 8088, however identified for its corrosion resistance, is vulnerable to squalor in highly acidic settings, affectation trials in several industrial claims. GWH extract act as an ecologically …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 44–60 Read article
-
Electroplating and Corrosion Properties of Binary and Ternary Zinc Alloys with Nickel, Cobalt and Iron
Abstract: The anti-corrosive three binary (Zn-Ni, Zn-Co, Zn-Fe) and two ternary (Zn-Ni-Co, Zn-Co-Fe) alloy coating films on mild steel from acid chloride bath using sulphanilic acid and gelatin as additives for the electroplating technique. The normal Hull cell method was used to optimize the bath compositions, temperature and pH of the bath solutions for coating performance against corrosion. The cause of current density (CD) on metal weight percentage (M = Ni, …
Published in Journal of Thin Films, Coating Science Technology & Application Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article
-
Development of Biomass-Derived Composites From Commodity Plastics Via Pyrolysis For Enhanced Corrosion Protection of Metals
Abstract: Escalating environmental concerns and the depletion of fossil resources have spurred the need for sustainable and eco-friendly materials. By converting plastic waste into valuable carbonaceous materials via pyrolysis, both plastic pollution and resource scarcity can be addressed. The process involves the thermal decomposition of plastics in an inert atmosphere, producing a mixture of gases, liquids, and solid residues rich in carbon. These carbonaceous residues are then incorporated with biomass materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 59–70 Read article
-
Ensuring Pipeline Longevity: Key Factors for Durability in the Oil and Gas Industry
Abstract: This article explores the durability of pipes in the oil and gas industry, focusing on critical aspects such as remaining life, anti-wax coatings, life extension strategies, and the implications of oil spills and leaks. Corrosion is identified as a significant threat to pipeline integrity, influenced by various corrosive substances. Standards like API 581 and API 571 help assess corrosion rates and remaining life of pipelines transporting different crude oils. Additionally, …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 19–24 Read article
-
Investigation of the Effects of Physicochemical Behaviour, Design, and Contaminants on Corrosion Mechanisms for Coatings
Abstract: Advanced coating systems have been developed to address the challenges of coating life and corrosion mechanisms in various industries. These coating systems are designed to provide enhanced protection, prolong the lifespan of coated surfaces, and reduce the effects of corrosion. A corrosion study with respect to contaminants (water soluble salts like sulphates, chlorides and nitrates etc.), design of the components (macro and micro defects developed due to improper design and …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 44–54 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article